valutazioni - 6, GPA: 4.3
(
)
)
|
da questo dispositivo ha anche altre istruzioni :
Facilità d'uso
worldwide — Bluetooth QD ID: B16563 More information about Bluetooth is available at Safety precautions Never disassemble or modify your headset for any reason. Doing this may •• cause the headset to malfunction or become combustible. Bring the headset to an authorised service centre to repair it. When using your headset while driving, follow local regulations in the region •• you are in. Avoid storage at high temperatures (above 50° C/122° F), such as in a hot •• vehicle or in direct sunlight, as this can damage performance and reduce battery life. Do not expose the headset or any of its supplied parts to rain or other liquids.•• Excessive exposure to sound at high volumes can cause hearing damage. Always turn the volume down before plugging the earphones into an audio source and use only the minimum volume setting necessary to hear your conversation or music. Getting started This section explains what to remember for the proper use of your Bluetooth headset. Your headset overview Make sure you have the following items with your headset: travel adapter, charging •• cradle, ear rubbers, earhook and user manual. The items supplied with your headset may vary depending on your region.•• Ear hook Indicator light Volume button Multi-Function button Earpiece Charging contacts Button functions Multi-Function button Press and hold to turn the headset on or off.•• Press and hold to enter Pairing mode.•• Press to make or answer a call.•• Press to end a call.•• Volume up or down button Press to adjust the volume.•• Press and hold to turn the microphone on or off.•• In Pairing mode, press and hold the Volume up button to turn the Multi-point •• feature on. In Pairing mode, press and hold the Volume down button to turn the Multi-point •• feature off. You can hear a beep when the volume level of the headset reaches to the lowest or highest level. Charging the headset This headset has a rechargeable internal battery which is non-removable. Ensure that you fully charge the battery before using the headset for the first time. Plug the headset into the charging cradle.11 Open the cover to the charger jack on the back of the charging cradle.22 Plug the small end of the travel adapter into the charger jack.33 Plug the large end of the travel adapter into a power outlet.44 During charging, the indicator light will turn red. If charging does not begin, unplug the travel adapter and plug it in again. When the headset is fully charged, the indicator light changes to blue. Unplug 55the travel adapter from the power outlet and remove the headset from the charging cradle. Use only a Samsung-approved travel adapter. Unauthorised travel adapters may •• cause an explosion or damage to the headset. The battery will gradually wear out while charging or discharging because it is •• a consumable part. While charging, the headset goes into charging mode and deactivates other •• functions. When the battery charge gets low The headset beeps and the indicator light flashes red. Recharge the battery. If the headset powers off during a call, the call will be automatically transferred to the phone. Checking the battery level At the same time, press and hold the Multi-Function button and the Volume down button. Depending on the battery level, the indicator light flashes 5 times in one of the following colours: Battery level Indicator light colour Above 80% Blue 80 ~20% Violet Below 20% Red Wearing the headset Place the headset on your ear. Depending on what ear you are going to wear the headset, simply adjust the ear hook accordingly. ^ Left ^ Right Using your headset This section explains how to turn the headset on, pair and connect to the phone, and use various functions. Activated functions and features may differ depending on the phone type.•• Some devices, especially those that are not tested or approved by Bluetooth SIG, •• may be incompatible with your headset. Turning the headset on or off To turn the headset on, press and hold the Multi-Function button for 4 seconds. •• The blue indicator light will flash 4 times. To turn the headset off, press and hold the Multi-Function button for 4 seconds. •• The indicator light turns off after the blue indicator light changes to red. Pairing and connecting the headset Pairing will create a unique and encrypted wireless link between two Bluetooth enabled devices, such as a Bluetooth phone and a Bluetooth headset. To use the headset with other Bluetooth devices, the devices must be paired. When trying to pair the two devices, keep the headset and the phone reasonably close together. After pairing, you can connect the two devices. Pairing and connecting the headset with a phone Enter Pairing mode.11 Power off the headset. Press and hold the Multi-Function button for 8 seconds •• until the blue indicator light stays lit. If you turn on the headset for the first time, it proceeds into Pairing mode •• immediately. Activate the Bluetooth feature on your phone and search for the headset (se...
Questo manuale è adatto anche per i modelli :cuffie wireless e altri accessori - HM3100 (742.46 kb)