valutazioni - 4, GPA: 4
(
)
)
|
da questo dispositivo ha anche altre istruzioni :
Facilità d'uso
Safety precautions • When using your headset while driving, follow local regulations in the region you are in. • Never disassemble or modify your headset for any reason. Doing this may cause the headset to malfunction or become combustible. Bring the headset to an authorized service center to repair it. • Keep your device and all accessories out of the reach of small children or animals. Small parts may cause choking or serious injury if swallowed. • Avoid exposing your device to very cold or very hot temperatures (below 0 °C or above 45 °C). Extreme temperatures can cause the deformation of the device and reduce the charging capacity and life of your device. • Do not allow your device to get wet — liquids can cause serious damage. Do not handle your device with wet hands. Water damage to your device can void your manufacturer’s warranty. • Avoid using your device’s light close to the eyes of children or animals. • Do not use the device during a thunderstorm. Thunderstorms can cause the device to malfunction and increase the risk of electric shock. Excessive exposure to loud sounds can cause hearing damage. Exposure to loud sounds while driving may distract your attention and cause an accident. Use only the minimum volume setting necessary to hear your conversation. English 3 Getting started Your headset overview Microphone Volume button Indicator light Talk button Power switch Charging socket Earpiece Ear hook Make sure you have the following items: headset, travel adapter, ear rubbers, ear hook and user manual. The supplied items may vary. EnglishButton functions Button Function Power switch Slide to turn the headset on or off. • Talk Press and hold for 3 seconds to enter Pairing mode. • Press to answer or end a call. • Press and hold to reject an incoming call. • Press and hold to place a call on hold. • Press and hold to switch between calls. • Volume Press to adjust the volume. • Press and hold to turn the microphone on or off during • a call. Press and hold both Volume buttons simultaneously • to turn the indicator light on or off. EnglishButton functions Button Function Power switch Slide to turn the headset on or off. • Talk Press and hold for 3 seconds to enter Pairing mode. • Press to answer or end a call. • Press and hold to reject an incoming call. • Press and hold to place a call on hold. • Press and hold to switch between calls. • Volume Press to adjust the volume. • Press and hold to turn the microphone on or off during • a call. Press and hold both Volume buttons simultaneously • to turn the indicator light on or off. 5 Charging the headset Charging the headset This headset has a rechargeable internal battery which is non-removable. Make sure the headset is fully charged before using it for the first time. 1 Connect the travel adapter to the charging socket on the headset. 2 Plug the travel adapter in to the wall outlet. During charging, the indicator light will turn red. If charging does not begin, unplug the travel adapter and plug it in again. 3 When the headset is fully charged, the red indicator light changes to blue. Unplug the travel adapter from the wall outlet and the headset. • Use only Samsung-approved chargers. Unauthorized or Non-Samsung chargers could cause damage to the headset or in extreme circumstances an explosion, it could also invalidate any warranty on the product. • Repeatedly charging and discharging of the headset, over time will cause the battery performance will diminish. This is normal for all rechargeable batteries. • Never make or receive calls while charging, always disconnect your headset from the charger and answer the call. • To save energy, unplug the travel adapter when not in use. The travel adapter does not have a power switch, so you must unplug it from the outlet when not in use to avoid wasting power. The travel adapter should remain close to the socket when in use. Checking the battery level To check the battery level, press and hold the Volume down button and the Talk button at the same time. Depending on the battery level, the indicator light flashes 5 times in one of the following colors: Battery level Indicator light color Above 80% Blue 80 ~ 20% Violet Below 20% Red English 7 When the headset battery is low The headset beeps and the indicator light flashes red. If the headset powers off during a call, the call will be automatically transferred to the phone. Wearing the headset Depending on which ear you are going to wear the headset, simply adjust the ear hook accordingly. . Right Left . You can also use the optional ear rubbers instead of the ear hook. Remove the earpiece cover and attach the ear rubber. Then, rotate the ear rubber left or right slightly depending on which ear you are going to wear the headset. Using your headset This section explains how to turn the headset on, pair and connect to the phone, and use various functions. • Activated functions and features may differ depending on the phone type. • Some devices, especially those th...