valutazioni - 2, GPA: 3
(
)
)
|
Foto e specifiche Nokia BH-300 |
Facilità d'uso
The fully charged battery has power for up to 5 hours and 30 minutes of talk-time or up to 150 hours of standby time. However, the talk and standby times may vary when used with different mobile phones or Get started other compatible Bluetooth devices, usage settings, usage styles, and environments. When the battery is running out of power, the headset beeps, and the red indicator light starts to flash. ¦ Switch the headset on or off To switch on, press and hold the power key. The headset beeps, and the green indicator light starts to flash quickly. When the headset is connected to a paired phone and is ready for use, the green indicator light flashes slowly. To switch off, press and hold the power key. The headset beeps, and the red indicator light is displayed briefly. ¦ Pair the headset Before you can use the headset with your phone, you must pair and connect the headset with it. 1. Switch on your phone and the headset. 2. Activate the Bluetooth feature on the phone, and set the phone to search for Bluetooth devices. See the user guide of your phone for instructions. 3. Select the headset (Nokia BH-300) from the list of found devices. Get started 4. Enter the Bluetooth passcode 0000 to pair and connect the headset to your phone. In some phones you may need to make the connection separately after pairing. See the user guide of your phone for details. You only need to pair the headset with your phone once. If the pairing is successful, the headset beeps and appears in the phone menu where you can view the currently paired Bluetooth devices. Disconnect the headset from the phone To disconnect the headset from your phone (for example, to connect the phone to another Bluetooth device), do one of the following: • Switch off the headset. • Disconnect the headset in the Bluetooth menu of your phone. • Move the headset more than 10 meters (30 feet) away from the phone. You do not need to delete the pairing with the headset to disconnect it. Reconnect the headset to your phone To connect the headset to your phone, switch on the headset, make the connection in the Bluetooth menu of your phone, or press and hold the answer/end key. You can set your phone to connect with the headset automatically when the headset is switched on. To do this in Nokia phones, change your paired device settings in the Bluetooth menu. See the user guide of your phone for details. Get started ¦ Troubleshooting If you cannot connect the headset to your phone, do as follows: • Ensure that the headset is charged, switched on, and paired with your phone. • Ensure that the Bluetooth feature is activated on your phone. • Check that the headset is within 10 meters (30 feet) of your phone and that there are no obstructions between the headset and the phone, such as walls, or other electronic devices. • To reset the headset if it stops functioning, although it is charged, plug the headset into a charger, and briefly press the power key and the answer/end key at the same time. This reset does not clear your settings (for example, pairing settings). Basic use 3. Basic use ¦ Place the headset on the ear The headset has an earloop that is attached around it. To use the headset without placing the earloop over the ear, plug the earpiece into your ear. To use the headset with the earloop on the right ear, with the back of the headset facing you, detach the earloop from the right side of the headset (1) by lifting it. To use the headset with the earloop on the left ear, detach the earloop from the left side of the headset. Slide the earloop behind your ear (2), and plug the earpiece into your ear (3). The headset is supplied with earloops in different colors. To change the earloop, detach the earloop from both sides of the headset, and attach Basic use the new earloop by inserting the catches at the ends of the earloop into the corresponding slots in the headset. ¦ Call handling To make a call, use your phone in the normal way when the headset is connected to your phone. If your phone supports last number redialing with this device, press the answer/end key twice briefly while no call is in progress. To answer a call, press the answer/end key, or use the phone keys. If the automatic answer function is set on, the phone automatically answers the incoming call after one ring. To reject an incoming call, briefly press the answer/end key twice. To end a call, press the answer/end key, or use the phone keys. ¦ Adjust the earphone volume To increase or decrease the earphone volume during a call, use the volume keys on your phone. ¦ Mute or unmute the microphone To mute or unmute the microphone during a call, use the respective function in your phone. Basic use ¦ Switch the call between the phone and headset To switch the call between the headset and a compatible Nokia phone, press and hold the answer/end key, or use the respective function in your phone. ¦ Use the headset with several phones You can pair the headset with up to eight phones but connect it to onl...