valutazioni - 2, GPA: 5
(
)
)
|
Facilità d'uso
General description B Blender: A Stopper B Lid C Opening in lid D Pouring spout E Blender jar F Level indications G Rubber sealing ring H Blade unit I Safety lock J M = Pulse ("Moment")/Quick Clean button K Speed buttons -3: high speed -2: normal speed -1: low speed -0 :Off L Rubber suction feet/cord storage facility B Fruit Filter: M Fruit filter Safety notice -Always unplug the appliance from the mains before assembling, disassembling or making adjustments to any of the accessories. -Keep the appliance out of the reach of children. -The motor only starts if the blender jar attachment has been correctly assembled onto the motor unit. -Make sure the blade unit is securely fastened onto the blender jar before you screw the attachment onto the motor unit. -Never touch the blade unit when it is assembled on the appliance and the appliance is plugged in. -Avoid touching the cutting edges of the blade units when cleaning them.They are very sharp and you could easily cut your fingers on them. -To reduce the risk of injury, never place the blade unit onto the motor unit without having attached the blender jar or mill beaker properly. Important Read these instructions for use carefully before using the appliance and save them for future reference. General . Check if the voltage indicated on the appliance corresponds to the local mains voltage (110127 volts or 220-240 volts) before you connect the appliance. . Never use any accessories or parts from other manufacturers or that have not been specifically advised by Philips.Your guarantee will become invalid if such accessories or parts have been used. ENGLISH . Do not use the appliance if the mains cord, the plug or other parts are damaged. . If the mains cord is damaged, it must be replaced by Philips, a service centre authorised by Philips or similarly qualified persons in order to avoid a hazard. . Never let the appliance run unattended. . Never switch the appliance on or off by turning the accessories. . Do not exceed the maximum level indicated on the accessories. . Do not exceed the quantities and preparation times recommended at the recipes. . Always make sure the lid is properly closed and the stopper has been properly inserted into the lid before you switch the appliance on. . To avoid leakage, always make sure the rubber sealing ring has been correctly placed before you start using the blender. . To reduce the risk of injury, never place the blade unit onto the motor unit without having attached the blender jar or mill beaker properly. . Avoid touching the blades, especially when the appliance is plugged in.The blades are very sharp! . Always make sure that the blade unit is correctly assembled before you plug the appliance in and switch it on. . If the blades get stuck, unplug the appliance before removing the ingredients that are blocking the blades. Blender . To avoid spillage, always make sure the lid is properly closed and the stopper has been properly inserted into the lid before you switch the appliance on. . If the ingredients stick to the wall of the blender jar, switch the appliance off, unplug it and loosen the ingredients from the wall with a spatula or by adding liquid. . The jar is made of glass and therefore breakable.Do not drop the jar on a hard floor.Also avoid extreme thermal shocks. If the jar is very cold, rinse it well with lukewarm water before pouring in hot liquid. . If the glass jar cracks, stop using it. Filter . Do not use the filter to process hot ingredients. . Never overload the filter. Do not put more than 75g dried soy beans (unsoaked weight) or 150g fruit in the filter at the same time (see 'Recipes' ). Before first use . Wash all accessories and detachable parts (see 'Cleaning'). . Wind excess mains cord round the base of the appliance. (fig. 2) Using the appliance Blender . The blender is intended for: -Blending fluids, e.g. dairy products, sauces, fruit juices, soups, mixed drinks, shakes. -Mixing soft ingredients, e.g. pancake batter or mayonnaise. -Pureeing cooked ingredients, e.g. for making baby food. Preparing the blender for use 1 2 3 Place the sealing ring in the blade unit. (fig. 3) Mount the blender jar onto the blade unit and turn it in the direction of the arrow until it locks into position.Always make sure that you place the jar onto the blade unit in such a way that the level indications on the blender jar are in line with the ribs on the blade unit. (fig. 4) Mount the blender jar with the blade unit attached to it onto the motor unit and turn it in the direction of the arrow until it locks into position. (fig. 5) ENGLISH Do not to exert too much pressure on the handle of the jar. 4 Put the ingredients in the jar. Never fill the jar with ingredients that are hotter than 80cC. 5 After putting the ingredients in the blender jar, attach the lid to the jar by pressing it down and turning it. Make sure that the sieve in the lid is positioned in front of the spout of the jar to be able to pour out liquids. (fig. 6...
Questo manuale è adatto anche per i modelli :Frullatori - HR1747 (3.08 mb)
Frullatori - HR1744/80 (3.08 mb)
Frullatori - HR1744/16 (3.08 mb)