valutazioni - 3, GPA: 4
(
)
)
|
Facilità d'uso
22. Always close the jar with the lid before starting mixing. When mixing hot liquid, do not fill more than 2/3 of the jar and be very careful in order to avoid splashing of hot liquid, otherwise you can get burned. Do not forget to close the feeding hole of the pouring jar with the cap. 23. Screw on blade assembly firmly. Injury can result if moving blades accidentally become exposed. 24. Do not leave blender unattended while it is operating. 25. To disconnect cord, turn the speed selector to "0" , then remove the plug from wall outlet. SAVE THESE INSTRUCTIONS POLARIZED PLUG INSTRUCTIONS Some appliances are equipped with a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug will fit into the polarized outlet only one way. If the plug does not properly fit into the outlet at first, reverse it. If it still does not fit, contact a competent qualified electrician. Do not attempt to modify the plug in any way. For appliances equipped with a standard plug, simply insert the plug into the outlet without paying attention to the way you plug it. 3 USK BL 25161 -090602 SHORT CORD INSTRUCTIONS A short power supply cord is provided to reduce the hazards resulting from becoming entangled in, or tripping over a longer cord. Extension cords may be used if care is exercised in their use. • The electrical rating of the extension cord should be at least that of the appliance. If the electrical rating of the extension cord is too low, it could overheat and burn. • The resulting extended cord should be arranged so that it will not drape over the counter top or tabletop where it can be pulled on by children or tripped over. PART DESCRIPTION 1. Locking cap with feeding 5. Blades opening 6. Blade fixing ring 2. Lid 7. Motor block 3. Mixing jar 8. Switch (P / 0 / 1 /2) 4. Sealing ring 9. Jar assembly 4 USK BL 25161 -090602 IMPORTANT INFORMATION This appliance is not for professional use. You should follow the requested breaks. Failure to follow this instruction carefully may result in damage to the motor. The maximum continuous usage time is 1 minute. After 1 minute of continuous use, you should insert a break of at least 10 minutes. ASSEMBLY OF THE BLENDER AND USE CAUTION! Your appliance is fitted with a security device allowing the functioning of the appliance only when the jar is correctly placed on the motor block. If the jar is correctly positioned and the appliance does not start, call your after sales service. If the blade is disassembled from the bottom of the jar, check the cleaning section for mounting instructions before continuing. • Put pouring jar on the motor block and make sure it is correctly inserted. • Remove the lid of the blender. • Fill the pouring jar with the chosen ingredients. • Close the lid. • Plug in the appliance. • Choose the mixing speed with the button on the motor base. The position 0 corresponds to the stopping of the appliance, the position 1 to the slow speed and the position 2 to the fast one. • The position "P" (Pulse) is particular because the button has to be kept manually. This position is generally used to crush ice in order to avoid damages on the blades, but it can also be used to complete the mixing. • It is also possible to add liquids or other ingredients anytime without stopping the appliance. You only have to remove the cap, which closes the feeding opening by turning and raising it straight up. • Once you have finished the preparation, stop the appliance (position 0) and unplug the appliance. 5 USK BL 25161 -090602 • Remove the jar from the base. Then remove the lid and pour the liquid in the desired receptacle. HOW TO CLEAN • Always unplug from outlet before cleaning. • For a quick rinsing of the pouring jar (for example between two preparations), you can use clear water and switch on your appliance for a few seconds. In this case, do not use any detergent. • For a full cleaning, remove the jar from the motor block and turn the blade fixing ring on the bottom of the jar anti-clockwise to detach the sealing ring and the blade (this will make the cleaning easier). Then you can clean these parts with soapy water and rinse thoroughly with clear water. Dry before assembling. To attach the blades, put the sealing ring around the blades, insert them in the bottom of the jar and tighten the fixing ring by turning it clockwise (tighten vigorously in order to avoid leaks). Caution, do not lose the seal during this operation. • You can wipe the motor block with a soft damp cloth. • IMPORTANT : the borosilicate jar of your blender is designed to support sudden temperature variations up to 50°C / 125°F. After preparing an icy preparation, it is important to avoid cleaning the jar with very hot water immediately afterwards, or the glass may shatter. Likewise, after preparing a hot preparation like soup, please do not rinse with very cold water immediately afterwards. 6 USK BL 25161 -090602 WARRANTY We suggest that you complete and return the enc...