valutazioni - 1, GPA: 5
(
)
)
|
da questo dispositivo ha anche altre istruzioni :
Facilità d'uso
• Enable : Select enable if you want to edit channel number. This menu will be displayed only when you set the antenna source type and country as below. Antenna source Country Air Netherlands, Italy Common Interface Show the CI Menu Information screen. • CI Menu : This enables the user to select from the CAM provided menu. Select the CI Menu based on the menu PC Card. • Application Info. : View information on the CAM(Conditional Access Module) inserted into the CI slot and on the “CI CAM with CI or CI+ CARD” which is inserted into the CAM. You can install the CAM anytime whether the product is on or off. 1. Purchase a CI CAM at your nearest dealer or by phone. 2. Firmly insert the “CI CAM with CI or CI+ CARD” into the CAM in the direction of the arrow. English 43 05 Setup Wired Network . . Setting Up a Wired Connection - Auto 1. Press the ^Ў buttons to select Wired. 2. Press the ENTER button. The Network Status screen appears. The product connects to the network after the network connection is verified. . . Setting Up a Wired Connection - Manual If you have a static IP address or the Auto Setting does not work, you’ll need to set the Network Settings values manually. To view your Network Settings values on most Windows computers, follow these steps: Windows XP 1. Right click the Network icon on the bottom right of the Windows desktop. 2. In the pop-up menu, click Status. 3. On the dialog that appears, click the Support tab. 4. On the Support tab, click the Details button. The Network settings are displayed. Windows 7 1. Click the Network icon on the bottom right of the Windows desktop. 2. In the pop-up menu, click Network and Sharing Centre. 3. On the dialog that appears, click the Local Area Connection or Wireless Network Connection depending on your network connection. 4. On the Support tab, click the Details button. The Network settings are displayed. 3. Insert the CAM with the “CI CAM with CI or CI+ CARD” into the common interface slot, in the direction of the arrow so that it aligns parallel with the slot. 4. Check if you can see a picture on a scrambled signal channel. . . NOTE ` ` This Device is work with CI and CI+ CAM. But in case of some local DVB-T association, this device doesn't have perfect compatibility with all kinds of CAM. If there is a problem, pull the CAM CARD out of the Set and insert it into the slot again. Network Before you begin, contact your ISP to find out if your IP address is static or dynamic. If it is dynamic, and you are using a wired or wireless connection, we recommend using the Auto procedures. If you are using a wireless connection and your router has the capability, you can use WPS(PBC) or One Foot Connection. If your IP address is static, you must use the manual set up procedure for both wired and wireless connections. Network Settings To begin setting up the network connection for your product, follow these steps: 1. In the Home menu, press the <> buttons to select Settings, and then press the ENTER button. 2. Press the ^Ў buttons to select Network, and then press the ENTER button. 3. Press the ^Ў buttons to select Network Settings, and then press the ENTER button. 4. Press the ^Ў buttons to select Wired, Wireless (general), WPS(PBC) or One Foot Connection, and then press the ENTER button. 5. If you have a wired network, go to Wired Network below. If you have a wireless network, go to Wireless Network on pages 44~46. Settings Display Audio Channel Network System Language Security General Support Network Settings > Move " Enter ' Return Select a network connection type. Wired (Wgeirneelerassl) WPS(PBC) COonnne eFcotoiotn Connect to the network using a LAN cable. Please make sure that the LAN cable is connected. 44 English Setup . . NOTE ` ` Depending on your Windows version, the information may differ. To enter the Network settings into your product, follow these steps: 1. Press the ^Ў buttons to select Wired, and then press the ENTER button. 2. Press the <> buttons to select IP Settings, and then press the ENTER button. 3. On the Network Status screen, select Cancel, and then press Enter. 4. Press the ENTER button to select IP Mode. 5. Press the ^Ў buttons to select Manual, and then press the ENTER button. 6. Press the Ў button to go to the first entry field (IP Address). 7. Use the number buttons on your remote to enter numbers. 8. When done with each field, press the > button to move successively to the next field. You can also use the other arrow buttons to move up, down, and back. 9. Enter the IP Address, Subnet Mask, and Gateway values. 10. Press the Ў button to go to DNS Mode. 11. Press the Ў button to go to the first DNS entry field. Enter the numbers as above. 12. Press the ENTER button to select OK. The Network Status screen appears. The product connects to the network after the network connection is verified. Wireless Network You can setup a wireless network three ways: • Wireless (general) • Using WPS(PBC) • One Foot Connection Wireless (general) includes b...