valutazioni - 6, GPA: 4.2
(
)
)
|
da questo dispositivo ha anche altre istruzioni :
Facilità d'uso
Resolution of TV input 1080p@60F 1080p@60F 1080i 1080i 720p 720p 576p/480p 576p/480p 576i/480i English 31 HT-D6500_ELS_1226.indd 31 2011-12-26 3:22:09 Setup .NOTE . If the TV you connected to the product does not support Movie Frame or the resolution you selected, the message “If no pictures are shown after the selection, please wait for 15 seconds. And then, the resolution will be reverted to the previous value automatically. Would you like to make a selection?” appears. If you select Yes, the TV’s screen will go blank for 15 seconds, and then the resolution will revert to the previous resolution automatically. . If the screen stays blank after you have changed the resolution, remove all discs, and then press and hold the STOP (.) button on the front of the product for more than 5 seconds. All settings are restored to the factory default. Follow the steps on the previous page to access each mode and select the Display Setup that your TV will support. . When the factory default settings are restored, all stored user BD data is deleted. . The Blu-ray Disc must have the 24 frame feature for the product to use the Movie Frame (24Fs) mode. . If both HDMI and Component jacks are connected and you are currently viewing Component output, the resolution is fixed to 576i/480i. HDMI Colour Format Lets you set the colour space format for HDMI output to match the capabilities of the connected device (TV, monitor, etc). • Auto : Automatically sets the product to the optimum format supported by your device. • YCbCr (4:4:4) : If your TV supports the YCbCr colour space via HDMI, select this to output the normal YCbCr colour gamut. • RGB (Standard) : Select this to output the normal RGB colour gamut. • RGB (Enhanced) : If you have connected the product to a DVI display device such as a monitor, select this to output the enhanced RGB colour gamut. 32 English Movie Frame (24 Fs) Setting the Movie Frame (24Fs) feature to Auto allows you to adjust the product’s HDMI output to 24 frames per second for improved picture quality. You can enjoy the Movie Frame (24Fs) feature only on a TV supporting this frame rate. You can select Movie Frame only when the product is in the HDMI 1080i or 1080p output resolution modes. • Auto : Movie Frame (24Fs) functions work. • Off : Movie Frame (24Fs) functions are off. HDMI Deep Colour Lets you output video from the HDMI OUT jack with Deep Colour. Deep Colour provides more accurate colour reproduction with greater colour depth. • Auto: The product outputs video with Deep Colour to a connected TV which supports HDMI Deep Colour. • Off : The picture is output without Deep Colour. Still Mode Lets you set the type of picture the product displays when you pause DVD playback. • Auto: Automatically shows the best still picture depending on the content. • Frame : Select when pausing a scene with a little action. • Field : Select when pausing a scene with a lot of action. Progressive Mode Lets you improve picture quality when viewing DVDs. • Auto : Select to have the product automatically select the best picture quality for the DVD you’re watching. • Video : Select for the best picture quality from concert or TV show DVDs. HT-D6500_ELS_1226.indd 32 2011-12-26 3:22:09 03 Setup Audio Speaker Settings Level You can adjust the balance and level for each speaker. Adjusting Front/Centre/Surround/Subwoofer Speaker Level • The volume level can be adjusted in steps from -6dB to +6dB. • The sound gets louder as you move closer to +6dB and quieter as you get closer to -6dB. Distance If the speakers cannot be placed at equal distances from the listening position, you can adjust the delay time of the audio signals from the front, centre, surround and subwoofer speakers. • You can set the Speaker Distance between 1ft(0.3m) and 30ft(9.0m). Test Tone Use the Test Tone feature to check the speaker connections. Press the <, > buttons to select ON. • A test tone will be sent to Front L Center Front R Surround R Surround L Subwoofer in order so you can make sure the speakers are set up correctly. To stop the test tone, press the <, > buttons to select Off. Settings Display Audio Network System Language Security General Support Speaker Settings > Move " Enter ' Return Level | Distance Test Tone : Off Settings Display Audio Network System Language Security General Support Distance > Move < Change ' Return Front L < 10(ft) 3.0(m) | Front R : 10(ft) 3.0(m) Center : 10(ft) 3.0(m) Surround L : 10(ft) 3.0(m) Surround R : 10(ft) 3.0(m) Subwoofer : 10(ft) 3.0(m) Test Tone : Off Settings Display Audio Network System Language Security General Support Level > Move < Change ' Return Front L < 0 dB | Front R : 0 dB Center : 0 dB Surround L : 0 dB Surround R : 0 dB Subwoofer : 0 dB Test Tone : Off Settings Display Audio Network System Language Security General Support Speaker Settings > Move " Enter ' Return Level Distance Test Tone < On | NOTE When HDMI Audio is ON (audio is produced through TV speakers), the Test Tone function is ...