valutazioni - 0, GPA: 0
(
)
)
|
Facilità d'uso
a Unzip the download, and make sure that the unzipped folder is named “UPG_ ALL”. 3 45b Put the “UPG _ALL” folder in the root director y. Connect the USB storage device to the (USB) connector on this player. Press , and select [Setup]. Select [Advanced] > [Software Update] > [USB]. » If an upgrade media is detected, you are prompted to star t the update. 6 Follow the instructions on the T V screen to update the sof tware. » When the update is complete, this player automatically turns off and on again. Caution • Do not turn off the power or remove the USB storage device when the software update is in progress because you might damage this player. EN 23 5 Specifications Note • Specifications are subject to change without notice Region code This player can play discs with the following region codes. DVD Blu-ray Countries Europe, United Kingdom B Playable media • BD-Video, BD 3D • DVD-Video, DVD+R /+RW, DVD-R /-RW, DVD+R /-R DL (Dual Layer) • VCD/SVCD • Audio CD, CD-R /CD-RW, MP3 media, WMA media, JPEG files • DivX (Ultra)/DivX Plus HD media, MKV media • USB storage device File format • Video: .avi, .divx, .mp4, .mkv, .wmv • Audio: .mp3, .wma, .wav • Picture: .jpg, .gif, .png Video • Signal system: PAL / NTSC • Composite video output: 1 Vp-p (75 ohm) • HDMI output 480p, 576p, 720p, 1080i, 1080p, 1080p24 Audio • 2 Channel analog output • Audio Front L&R : 2 Vrms (> 1 kohm) • Digital output: 0.5 Vp-p (75 ohm) • Coaxial • HDMI output • Sampling frequency: • MP3: 32 kHz, 44.1 kHz, 48 kHz • WMA: 44.1 kHz, 48 kHz • Constant bit rate: • MP3: 112 kbps - 320 kpbs • WMA: 48 kpbs - 192 kpbs 24 EN English USB • Compatibility: Hi-Speed USB (2.0) • Class suppor t: USB Mass Storage Class • File system: FAT16, FAT32 • Suppor t HDD (a por table hard drive disc): an ex ternal power source may be needed. Main unit • Power supply rating: AC 220-240V~, 50 Hz • Power consumption: 18 W • Power consumption in standby mode (fast wakeup disabled): < 0.18 W • Dimensions (w x h x d): 435 x 42 x 208.5 (mm) • Net Weight: 1.65 kg Accessories supplied • Remote control and batteries • User manual • CD-ROM built in multi-lingual user manual (Continental Europe only) Laser Specification • Laser Type (Diode): AlGaInN (BD), AlGaInP (DVD/CD) • Wave length: 400 ~ 410nm (BD), 650 ~ 663nm (DVD), 770 ~800nm (CD) • Output power (Max ratings): 20mW (BD), 7mW (DVD), 7mW (CD) EN 25 6 Troubleshooting Warning • Risk of electric shock. Never remove the casing of the player. To keep the warranty valid, never tr y to repair the player yourself. If you have problems using this player, check the following points before you request ser vice. If you still have a problem, register your player and get suppor t at If you contact Philips, you will be asked for the model and serial number of this player. The model number and serial number are on the back of this player. Write the numbers here: Model No. __________________________ Serial No. ___________________________ Main unit The buttons on this player do not work. • Disconnect this player from the power supply for a few minutes, and then reconnect. Picture No picture. • Make sure that the TV is switched to the correct source input for this player. • For the composite connection (via the VIDEO connector) to the TV, on this player select a video resolution of 480i/576i or 480p/576p under [HDMI Video] to enable video output. No picture on HDMI connection. • Make sure that the HDMI cable is not faulty. If it is faulty, replace with a new HDMI cable. • On the remote control, press and then press “731” (numeric buttons) to recover picture display. Or wait for 10 seconds for auto recovery. • If this player is connected to an unauthorized display device with an HDMI cable, the audio and video signals may not be output. The disc does not play high-definition video. • Make sure that the disc contains high-definition video. • Make sure that the TV suppor ts high-definition video. Sound No audio output from the TV. • Make sure that the audio cables are connected to the audio input of the TV. • Make sure that the TV is switched to the correct source input for this player. No audio output from the loudspeakers of the external audio device (home theater or amplifier). • Make sure that the audio cables are connected to the audio input of the audio device. • Switch the ex ternal audio device to the correct audio source input. 26 EN English No sound on HDMI connection. • You may not hear any sound from the HDMI output if the connected device is non-HDCP compliant or only DVI-compatible. No secondary audio output for Picture-in-Picture feature. • When [Bitstream] under the [HDMI Audio] or [Digital Audio] menu is selected, interactive sound like secondary sound for Picture-in-Picture feature is muted. Deselect [Bitstream]. Play Cannot play a disc. • Clean the disc. • Make sure that the disc is correctly loaded. • Make sure that this player suppor ts the disc. See “Specifications”. • Make sure that this player su...