valutazioni - 5, GPA: 4.4
(
)
)
|
Facilità d'uso
• The connected USB Flash Drive does not have enough space. • Secure at least 1GB free space in the USB Flash Drive for using BD-Live features. • Internet connection is not established. • Ensure that the unit is correctly connected to the local area network and can access the internet (see page 16). •Your broadband speed is not fast enough to use the BD-Live features. • Contact your Internet Service Provider (ISP) and increase the broadband speed is recommended. • The [BD-LIVE connection] option in the [Setup] menu is set to [Prohibited]. • Set the [BD-LIVE connection] option to [Permitted]. The Remote Control does not work properly. • The Remote Control is not pointed at the remote sensor on the player. • Point the Remote Control at the remote sensor of the player. • The Remote Control is too far from the player. • Operate the Remote Control closer to the player. The system does not function at all. •A state is unstable. • Unplug the power cord and then plug the power cord again after more than five seconds. 34 35 Reference Specifications General Power requirements: AC 120 V~, 60 Hz Power consumption: 18W Dimensions (W x H x D): Approx. 16.9 x 2.1 x 9.7 inches (430 x 54 x 245 mm) without foot Net Weight (Approx.): 6.2 lbs (2.8 kg) Operating temperature: 41 °F to 95 °F (5 °C to 35 °C) Operating humidity: 5 % to 90 % Outputs VIDEO OUT: 1.0 V (p-p), 75 ., sync negative, RCA jack x 1 COMPONENT VIDEO OUT: (Y) 1.0 V (p-p), 75 ., sync negative, RCA jack x 1 (Pb)/(Pr) 0.7 V (p-p), 75 ., RCA jack x 2 HDMI OUT (video/audio): 19 pin (HDMI standard, Type A) ANALOG AUDIO OUT: 2.0 Vrms (1 kHz, 0 dB), 600 ., RCA jack (L, R) x 1 DIGITAL OUT (COAXIAL): 0.5 V (p-p), 75 ., RCA jack x 1 DIGITAL OUT (OPTICAL): 3 V (p-p), Optical jack x 1 System Laser: Semiconductor laser, wavelength: 405nm / 650 nm Signal system: Standard NTSC Color TV system Frequency response: 20 Hz to 20 kHz (48 kHz, 96 kHz, 192 kHz sampling) Signal-to-noise ratio: More than 100 dB (ANALOG OUT connectors only) Harmonic distortion: Less than 0.008% Dynamic range: More than 95 dB LAN port: Ethernet jack x 1, 10BASE-T/100BASE-TX Bus power supply: DC 5 V 500 mA Accessories: Video cable (1) Audio cable (1) Remote control (1) Batteries (1) Note: Design and specifications are subject to change without prior notice. 35 Reference Specifications General Power requirements: AC 120 V~, 60 Hz Power consumption: 18W Dimensions (W x H x D): Approx. 16.9 x 2.1 x 9.7 inches (430 x 54 x 245 mm) without foot Net Weight (Approx.): 6.2 lbs (2.8 kg) Operating temperature: 41 °F to 95 °F (5 °C to 35 °C) Operating humidity: 5 % to 90 % Outputs VIDEO OUT: 1.0 V (p-p), 75 ., sync negative, RCA jack x 1 COMPONENT VIDEO OUT: (Y) 1.0 V (p-p), 75 ., sync negative, RCA jack x 1 (Pb)/(Pr) 0.7 V (p-p), 75 ., RCA jack x 2 HDMI OUT (video/audio): 19 pin (HDMI standard, Type A) ANALOG AUDIO OUT: 2.0 Vrms (1 kHz, 0 dB), 600 ., RCA jack (L, R) x 1 DIGITAL OUT (COAXIAL): 0.5 V (p-p), 75 ., RCA jack x 1 DIGITAL OUT (OPTICAL): 3 V (p-p), Optical jack x 1 System Laser: Semiconductor laser, wavelength: 405nm / 650 nm Signal system: Standard NTSC Color TV system Frequency response: 20 Hz to 20 kHz (48 kHz, 96 kHz, 192 kHz sampling) Signal-to-noise ratio: More than 100 dB (ANALOG OUT connectors only) Harmonic distortion: Less than 0.008% Dynamic range: More than 95 dB LAN port: Ethernet jack x 1, 10BASE-T/100BASE-TX Bus power supply: DC 5 V 500 mA Accessories: Video cable (1) Audio cable (1) Remote control (1) Batteries (1) Note: Design and specifications are subject to change without prior notice. The unit’s Audio Output Specifications Source Jack/ Setting Analog Output Stereo SPDIF (DIGITAL AUDIO OUT) PCM Stereo DTS Re-encode *3 Primary Pass-Thru *1 Dolby Digital PCM 2ch PCM 2ch DTS Dolby Digital Dolby Digital Plus PCM 2ch PCM 2ch DTS Dolby Digital Dolby TrueHD PCM 2ch PCM 2ch DTS Dolby Digital DTS PCM 2ch PCM 2ch DTS DTS DTS-HD PCM 2ch PCM 2ch DTS DTS Linear PCM 2ch PCM 2ch PCM 2ch DTS PCM 2ch Linear PCM 5.1ch PCM 2ch PCM 2ch DTS PCM 2ch Linear PCM 7.1ch PCM 2ch PCM 2ch DTS PCM 2ch Source Jack/ Setting HDMI OUT PCM Stereo PCM Multi-Ch DTS Re-encode *3 Primary Pass-Thru *1, *2 Dolby Digital PCM 2ch PCM 5.1ch DTS Dolby Digital Dolby Digital Plus PCM 2ch PCM 7.1ch DTS Dolby Digital Plus Dolby TrueHD PCM 2ch PCM 7.1ch DTS Dolby TrueHD DTS PCM 2ch PCM 5.1ch DTS DTS DTS-HD PCM 2ch PCM 5.1ch DTS DTS-HD Linear PCM 2ch PCM 2ch PCM 2ch DTS PCM 2ch Linear PCM 5.1ch PCM 2ch PCM 5.1ch DTS PCM 5.1ch Linear PCM 7.1ch PCM 2ch PCM 7.1ch DTS PCM 7.1ch Notes: *1 The secondary and interactive audio may not be included in the output bitstream if [SPDIF] or [HDMI] option is set to [Primary Pass-Thru]. (Except LPCM Codec : the output always include interactive and secondary audio.) *2 This player automatically selects the HDMI audio according to the decoding capability of the connected HDMI device even though [HDMI] option is set to [Primary Pass-Thru]. *3 If the [HDMI] or [SPDIF] option is set to [DTS re-encode], the au...