valutazioni - 2, GPA: 3.5
(
)
)
|
Facilità d'uso
• Make sure you have a personal computer with one or two open USB ports before connecting the drive to your computer. • Power for all other devices should be turn off before attaching the cables. Connect the drive to the computer as shown in figure. 1Connect the USB 2.0 (Y type) cable to the drive. 2Connect the other end of the USB 2.0 cable to your computer. 3The drive may get its power from the PC USB power. All systems may not meet USB power requirements and full performance may not be achieved. In this case, connect to the USB power cable. When the computer is ready, confirm that the drive is detected. And then, insert the supplied software CD into the drive and install the software. • Please do not connect the USB cables by any means other than specified above. Using the wrong type of cable with this drive can cause it to malfunction. • The machine does not have an ON/OFF switch. As soon as it is connected to the AC power, the power up sequence begins. The power supply cord is intended to serve as the main disconnect device. The power outlet shall be near the equipment and shall be easily accessible. • The appliance is not intended for use by young children or infirm persons without supervision. Young Children should be supervised to ensure that they do not play with appliance. • If the appliance is supplied from a cord extension set or an electrical portable outlet device, the cord extension set on electrical portable outlet device must be positioned so that it is not subject to splashing or ingress of moisture. Installation NOTES Connecting to computer Hardware Installation NOTES USB Power cable 1 2 3 • Please pay attention to handling Electrostatic Sensitive Devices, you may use anti-static products such as wrist straps, heel straps, mats to protect your body from electrostatic. • Make sure you have a personal computer with one or two open USB ports before connecting the drive to your computer. • Power for all other devices should be turn off before attaching the cables. Connect the drive to the computer as shown in figure. 1Connect the USB 2.0 (Y type) cable to the drive. 2Connect the other end of the USB 2.0 cable to your computer. 3The drive may get its power from the PC USB power. All systems may not meet USB power requirements and full performance may not be achieved. In this case, connect to the USB power cable. When the computer is ready, confirm that the drive is detected. And then, insert the supplied software CD into the drive and install the software. • Please do not connect the USB cables by any means other than specified above. Using the wrong type of cable with this drive can cause it to malfunction. • The machine does not have an ON/OFF switch. As soon as it is connected to the AC power, the power up sequence begins. The power supply cord is intended to serve as the main disconnect device. The power outlet shall be near the equipment and shall be easily accessible. • The appliance is not intended for use by young children or infirm persons without supervision. Young Children should be supervised to ensure that they do not play with appliance. • If the appliance is supplied from a cord extension set or an electrical portable outlet device, the cord extension set on electrical portable outlet device must be positioned so that it is not subject to splashing or ingress of moisture. Installation NOTES Connecting to computer Hardware Installation NOTES USB Power cable 1 2 3 1. Disc Tray 2. Drive activity indicator The LED is used to indicate the operation of drive. 3. Eject Button 4. Emergency Eject Hole 1. USB Connector (mini) This connector is used to connect to the USB 2.0 cable. Location and function of controls Removing the USB converter cable (For Windows) The drive supports the plug and play(not swap) function of Windows, and can be removed and inserted by performing the following operation. 1. Stop the application software being currently used. 2. Click the icon “ ” of the taskbar located on your screen’s bottom right side. 3. Click “Safely Remove USB Mass Storage Device-Drive[x:]”. 4. Click “Ok” and then remove the USB converter cable. 1 2 3 4 This following is the general figure of the design of the drive. The drive’s appearance and specifications may change without prior notice. Front Rear 1 NOTE Don’t remove the USB 2.0 cable when the busy indicator on the drive blinks, or during computer startup. The removing procedure varies depending on your OS. 1. Disc Tray 2. Drive activity indicator The LED is used to indicate the operation of drive. 3. Eject Button 4. Emergency Eject Hole 1. USB Connector (mini) This connector is used to connect to the USB 2.0 cable. Location and function of controls Removing the USB converter cable (For Windows) The drive supports the plug and play(not swap) function of Windows, and can be removed and inserted by performing the following operation. 1. Stop the application software being currently used. 2. Click the icon “ ” of the taskbar located on your...
Questo manuale è adatto anche per i modelli :unità CD / DVD - 386418 (233.1 kb)