valutazioni - 4, GPA: 3.8
(
)
)
|
da questo dispositivo ha anche altre istruzioni :
Facilità d'uso
For example, if the computer has an A:, C:, and D: drive before connecting the reader/writer, the drive letters will be assigned as follows when the reader/ writer is connected: Computer drive name Corresponding memory card Removable Disk (E:) CompactFlash Microdrive Removable Disk (F:) xD-Picture Card Removable Disk (G:) MultiMediaCard SD Memory Card Removable Disk (H:) “Memory Stick” media Removable Disk (I:) “Memory Stick Micro” (“M2”) media microSD Card 3 Insert a memory card into the corresponding slot. When a volume label has been assigned to the memory card, the volume label will be displayed together with the removable disk icon. 4 Use the removable disk icon to read or write data on the memory card. If the following message appears, the memory card has not been recognized correctly, even though the access indicator lights up. Remove the card and insert it again. Notes Notes • Use the removable disk icon for the memory card you are using. • It may take a while for the removable disk icons to appear. • If the removable disk icons do not appear, follow the steps under “Disconnecting the Reader/Writer From the Computer” in the Operating Instructions (this manual) to disconnect the reader/writer, and then wait at least 5 seconds before reconnecting it. If the [Safely Remove Hardware] icon mentioned in step 1 of “Disconnecting the Reader/Writer From the Computer” is not displayed, skip the rest of the procedure and immediately disconnect the reader/writer. • Depending on your operating system and the type of memory card you are using, the reader/writer drives may be recognized as “Local Disks” instead of “Removable Disks,” but this will not affect their operation. x For Windows 7 and Macintosh 1 Insert a memory card into the corresponding slot. The removable disk icon appears on the desktop. When a volume label is assigned to the memory card, the volume label will be displayed together with the removable disk icon. 2 Use the removable disk icon to read or write data on the memory card. x For Macintosh x For Windows 7 Removing a Memory Card Note • Do not remove a memory card while the access indicator is blinking. Doing so many cause damage to the data stored on the memory card. • Be sure to follow the steps described below. Sony accepts no responsibility for any damage or loss that results from removing a memory card without following the procedure described below. x For Windows other than Windows 7 1 Make sure the access indicator is not blinking. 2 Open [My Computer]. 3 Right-click the removable disk icon, and select [Eject]. 4 Pull the memory card straight out. x For Windows 7 1 Click the Start Button. 2 Click [Devices and Printers]. 3 Right click [USB2.0 Card R/W] drive icon. 4 Go to [Eject] with selection option. 5 Pull the memory card straight out. x For Macintosh 1 Close the files saved on the memory card, and exit any currently running applications. 2 Make sure the access indicator is not blinking. 3 Drag the removable disk icon to the [Trash]. Alternatively, select the removable disk icon, access the [File] menu on the menu bar, and select [Eject “Untitled”]*. * Depending on the memory card, a different label than “Untitled” may be shown. 4 Pull the memory card straight out. Reading the Access Indicator The access indicator changes according to the status of the reader/writer, as follows: Reader/writer status Access indicator Connected to a computer Lights up Reading/writing data Blinks Note If data cannot be read from or written to the memory card while the access indicator is lit, make sure the card is fully inserted into the slot. Disconnecting the Reader/Writer From the Computer Notes • Do not disconnect the reader/writer from the computer while the access indicator is blinking. Doing so may cause damage to the data stored on the memory card. • Be sure to follow the steps described below. Sony accepts no responsibility for any damage or loss that results from disconnecting the reader/ writer without following the procedure described below. x For Windows other than Windows 7 The following explanation is illustrated with screens from Windows XP, and assumes that drive names E:, F:, G:, H: and I: are assigned to the four slots of the reader/writer. The screens may differ for other versions of Windows. 1 Click [Safely Remove Hardware] on the task tray, located at the lower right corner of the screen. Click this icon Task tray 2 Click [Safely remove USB Mass Storage Device - Drives (E:, F:, G:, H:, I:)]. Click here 3 Make sure the message “The ‘USB Mass Storage Device’ device can now be safely removed from the system.” appears, and then disconnect the reader/writer. The ‘USB Mass Storage Device’ device can now be safely removed from the system. Note The above steps are not required when removing a memory card from the reader/writer. x For Windows 7 1 Click the Start Button. 2 Click Devices and Printers. 3Right click [USB2.0 Card R/W] drive icon. 4One by one ejects all removable disks or select ej...