We recommend DMA mode for fast writing. DMA Setting Before you install your COMBO drive, we recommend to set DMA to enabled on your PC system. See the following procedure to set DMA transfer mode in windows oprerating system. (Windows 98/ME) + Click on START + Select your COMBO drive + Click on Settings + Click on the Properties button + Select Control Panel + Click on the Settings tab + Select the System Icon + Check the DMA checkbox to enables DMA. + Click OK + Select the Device Man

If the disc has a crack (especially around the center hole), it is recommended to make a copy immediately and use the copy instead. When a cracked disc is used continuously, the size of the crack is likely to grow and this will eventually result in irreparable damage to the disc. -- Important to read and understand at all times. SAMSUNG DIGIТай) everyone’s invite

The indicator light comes on. ■i Play the disc (CD/DVD). Accessories • The type of accessories varies depending on product model. User Manual & Setup Guide. Software. Screws. Playing Video CDs Set up and run the SOFT MPEG program. £ Design and specifications are subject to change without prior notice. SAMSUNG DIGIТай) everyone’s invite

 Index Safety Precautions Introduction Setup Using the Drive Troubleshooting Specifications Samsung's OMS (Optical Media Solution) Customer Support Website (Http://samsung-ODD.com) offers the latest versions of firmware for ODD products, user instructions and product information. The Statement of Warranty Http://samsung.com Http://samsung-ODD.com SAMSUNG DIGIТай) everyone’s invitecítm Index I_Main Page m Safety Precautions Notational Installation While Operating Other n Using t

We recommend DMA mode for fast writing. DMA SettingBefore you install your CD-RW Drive, we recommend to set DMA to enabled on your PC system. See the following procedure to set DMA transfer mode in windows oprerating system. (Windows 98/ME) + Click on START + Click on Settings + Select Control Panel + Select the System Icon + Select the Device Manager panel in System Properties + Expand the CD-ROM icon + Select your CD-RW Drive + Click on the Properties button + Click on the Settings tab + Check

Edit the AUTOEXEC.BAT file. Add the C:\SAMSUNG\MSCDEX/D:SSCD000 entry. Reboot the computer. Connecting the CablesUsing the Drive Using the CD-R/RW Drive To play audio or video CDs in your CD-R/RW drive, proceed as follows. Push the power button and boot the computer. After booting the computer, open the disc compartment by pressing the Eject button. Insert the disc (CD) with the label on the disc facing upwards and close the disc compartment by pressing the Eject button. The indicator light come

Hard Drive Check whether the source file is corrupted. Optimize the hard disk by using the Windows defragmenter feature: START / PROGRAMS / ACCESSORIES / SYSTEM TOOLS / DISC DEFRAGMENTER Decompress the hard disk if it is compressed. Make sure that the space available on the hard disk is at least twice the size of the largest file to be recorded on the disc. If you wish to record more than 1000 small files: • First create an image file and copy the image file to the disc • Choose the low record s

Preferably, connect a second EIDE cable to the CD-ROM drive in master mode. Check the position of the jumper in the master/slave select terminal. Reinstall the device driver or update it with the latest version by downloading it from the Samsung Web site. - - This case may occur when there is a Windows installation problem; reinstall Windows. Check whether the audio cable is correctly connected to the sound output terminal on the CD-ROM drive and the sound card CD-IN terminal. Check that

Insert the disc supplied with the CD-R/RW drive in the drive. Follow the instructions displayed on the screen to install the utility. Refer to the separate utility documentation for further details. Store the utility disc in a safe place. Connecting the CablesSetup Installing the Device Driver No additional device driver is needed for Windows 98/2000/ME/XP/NT4.0, as the default Windows device driver is used. You can check that the CD-R/RW drive has been correctly detected by Windows. To do so, p