Log:
valutazioni - 2, GPA: 4.5 ( )

Istruzioni per l'uso Elta, Modello 2402N

Produttore : Elta
File Size : 22.2 mb
File Nome : ad3ea5f0-13b4-5714-697e-9229d75bc2df.pdf
Lingua di insegnamento: ruplitentresfrdebgnlhuptskcsro
Vai a scaricare



Facilità d'uso


1 2 5 3 6 4 17. Antenna connection Uncoil the FM wire antenna FM ANT. (17) on the rear of the device completely for best FM reception. General Operating Instructions On/Off Set the FUNCTION (11) selector always to the OFF position, if the device is not used. If the device is turned on, the POWER LED lights up red. 1. Select the mode with FUNCTION (11): OFF, CD or RADIO. 2. Adjust the volume with VOLUME (12) at the device. 3. Turn off the device by setting FUNCTION (11) to the OFF position. Radio 1. Set the FUNCTION selector (11) to the RADIO position. 2. Select with the BAND selector (10) the frequency range: AM, FM (FM Mono) or FM ST. (FM Stereo). 3. Select the desired station with the < TUNING > rotary knob (13). The frequency can be read on the frequency dial at the pointer position. 4. If the band selector is set to FM ST. (FM Stereo) and a stereo broadcast is received, the FM ST. LED in front of the device lights up. 5. Adjust the volume with VOLUME (12) at the device. FM Mono / Stereo - Mono: Set the BAND selector (10) to FM. - Stereo: Set the BAND selector (10) to FM ST. The FM ST. LED lights up. Recommendations for better reception FM: Uncoil the FM wire antenna FM ANT. (17) on the rear of the device completely for best FM reception. AM: The device has a built-in AM antenna. Change the position of the device if reception is poor. Disc (Audio CD) The CD player can only play audio CD’s. Never try to play MP3 CD’s, Data CD’s or VCD/DVD Discs. Inserting a disc 1. Set the FUNCTION selector (11) to the CD position. On the display flashes “- -” and after a few seconds “no“ will be indicated. 2. Open the door of the CD drive by pushing on the symbol /OPEN on the right side of the CD door. The display shows “- -”. 3. Insert a CD with the cover side faced up. 4. Close the door of the CD drive manually. On the display “- -” flashes and after a few seconds the total number of tracks (e.g. “20”) will be shown. Removing a disc 1. Make sure the device is in the stop mode ( (8) button). 2. Open the door of the CD drive by pushing on the symbol /OPEN on the right side of the CD door. The display shows “- -”. 3. Remove carefully the CD upwards without touching the surface. 4. Close the door of the CD drive manually. 5. Store the removed CD in its cover. INSERT A DISC 17. Antenna connection Uncoil the FM wire antenna FM ANT. (17) on the rear of the device completely for best FM reception. General Operating InstructionsOn/Off Set the FUNCTION (11) selector always to the OFF position, if the device is not used. If the device is turned on, the POWER LED lights up red. 1. Select the mode with FUNCTION (11): OFF, CD or RADIO. 2. Adjust the volume with VOLUME (12) at the device. 3. Turn off the device by setting FUNCTION (11) to the OFF position. Radio 1. Set the FUNCTION selector (11) to the RADIO position. 2. Select with the BAND selector (10) the frequency range: AM, FM (FM Mono) or FM ST. (FM Stereo). 3. Select the desired station with the < TUNING > rotary knob (13). The frequency can be read on the frequency dial at the pointer position. 4. If the band selector is set to FM ST. (FM Stereo) and a stereo broadcast is received, the FM ST. LED in front of the device lights up. 5. Adjust the volume with VOLUME (12) at the device. FM Mono / Stereo - Mono: Set the BAND selector (10) to FM. - Stereo: Set the BAND selector (10) to FM ST. The FM ST. LED lights up. Recommendations for better reception FM: Uncoil the FM wire antenna FM ANT. (17) on the rear of the device completely for best FM reception. AM: The device has a built-in AM antenna. Change the position of the device if reception is poor. Disc (Audio CD) The CD player can only play audio CD’s. Never try to play MP3 CD’s, Data CD’s or VCD/DVD Discs. Inserting a disc 1. Set the FUNCTION selector (11) to the CD position. On the display flashes “- -” and after a few seconds “no“ will be indicated. 2. Open the door of the CD drive by pushing on the symbol /OPEN on the right side of the CD door. The display shows “- -”. 3. Insert a CD with the cover side faced up. 4. Close the door of the CD drive manually. On the display “- -” flashes and after a few seconds the total number of tracks (e.g. “20”) will be shown. Removing a disc 1. Make sure the device is in the stop mode ( (8) button). 2. Open the door of the CD drive by pushing on the symbol /OPEN on the right side of the CD door. The display shows “- -”. 3. Remove carefully the CD upwards without touching the surface. 4. Close the door of the CD drive manually. 5. Store the removed CD in its cover. INSERT A DISC 18. Disc playback 1. Insert a CD (see section “Inserting a disc”). 2. Start the playback with (1) at the device or PLAY / PAUSE (1) on the remote control. The display shows the current track number (e.g. “01.”). The dot “.” on the right indicates the playback mode. 3. Adjust the volume with the VOLUME (12). 4. To pause the playback press again at the device or PLAY / PAUSE (1) on the remote control. The current tr...


Scrivi la tua opinione del dispositivo



Il messaggio
Il tuo nome :
Inserire le due cifre :
capcha





categorie