valutazioni - 2, GPA: 4
(
)
)
|
Facilità d'uso
• Electrical interference in your home can cause poor reception. Move the unit away from them (especially those with motors and transformers). - 9 - 10 - 11 Repeat Play This function will allow a single track or all tracks on the disc to be played repeatedly. REPEAT function can be operated when playing a disc. 1. To repeat the same track, press the PRESET/REPEAT button until “REPEAT” icon lights up on the display. 2. To repeat the disc, press the PRESET/REPEAT button until “REPEAT ALL” icon lights up on the display. 3. To cancel repeat play, press the PRESET/REPEAT button until “REPEAT” icon disappears from the display. Note: LCD display will return to Clock mode after about 15 sec with no further operation. Turn Off the Alarm General Guidelines • Do not touch the laser lens on the CD player. • Temperature changes may cause condensation on the laser lens. If condensation forms on the lens, leave the unit for about an hour until condensation evaporated. • Do not leave the unit exposure directly under sunlight or extreme Alarm Clock AM/FM Radio With CD Player 1. Press the STANDBY button to turn to function mode. 2. Press OPEN button to insert a CD into the slot with printed side facing upward and close the door. 3. Press the FUNCTION button to select CD mode. After loading the CD, total tracks of the disc will be shown. 4. Press the button to begin play. To Interrupt Playback • Press the button. • To resume playback, press the button again. To Stop Playback • Press the button. To Remove the Disc • Press the OPEN button and take the CD out. To Review CD Track No. • Press to review CD track no. Note: This operation will cause instant stop of track playing. Track Search - Locating a Particular Point In a Track • Keep the or button pressed during play and release at the desired point. Note: LCD display will return to Clock mode after about 15 sec with no further operation. Tracks Skip - Skipping To The Previous or Next Track • Press the button once to return to the beginning of the current track. • Press the button repeatedly to skip tracks forward one by one. • Press the button repeatedly to skip tracks backward one by one. Program Play Program play allows the selected tracks play in desired order. Program function can only be operated in stop mode. 1. Turn on the power and press the FUNCTION button to select CD mode. 2. Press MEMORY/SET button (in stop mode), first “”will appear for about 2 seconds and then “” will flash on the display. 3. Press or button to select the desired track. Then press MEMORY/SET button to store the track in memory. 4. To add additional tracks, repeat setp 2 ~ 3. Notes: • Check the program order. • Press MEMORY/SET button repeatedly. • To stop program play, press STOP button or select other function by pressing FUNCTION button. • The same track can be selected more than once in the same program. • A maximum of 20 tracks can be programmed. • With program on, the or skip function is available only for the selected tracks. • REPEAT play can be performed during program play. The TUNER, CD or BUZZER automatically sounds at the designated time everyday. You can set two different kinds of alarm time, one for ALARM 1 and the other for ALARM 2. Setting Alarm 1 (Same As Setting ALARM 2) 1. Press STANDBY button to return to clock mode. Alarm On with Tuner, CD and Buzzer Connect headphones (Dia. 3.5mm stereo mini plug) to the PHONE jack. When the headphones are connected, speaker sound will be automatically disconnected. WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THE UNIT TO RAIN OR MOISTURE. TO AVOID ELECTRICAL SHOCK, DO NOT OPEN THE CABINET. REFER SERVICING TO QUALIFIED PERSONNEL ONLY. For best results, please read this manual carefully before using the unit. When the designated alarm time comes, the selected sound source (TUNER, CD or BUZZER) will be triggered and the ALARM symbol will start to flash. RADIO Problems Poor FM reception Solutions • Make sure FM antenna wire is fully extended. • Electrical interference in your home can cause poor reception. Move the unit away from them (especially those with motors and transformers). - 9 - 10 - 11 Repeat Play This function will allow a single track or all tracks on the disc to be played repeatedly. REPEAT function can be operated when playing a disc. 1. To repeat the same track, press the PRESET/REPEAT button until “REPEAT” icon lights up on the display. 2. To repeat the disc, press the PRESET/REPEAT button until “REPEAT ALL” icon lights up on the display. 3. To cancel repeat play, press the PRESET/REPEAT button until “REPEAT” icon disappears from the display. Note: LCD display will return to Clock mode after about 15 sec with no further operation. Turn Off the Alarm General Guidelines • Do not touch the laser lens on the CD player. • Temperature changes may cause condensation on the laser lens. If condensation forms on the lens, leave the unit for about an hour until condensation evaporated. • Do not leave the unit ex...