valutazioni - 2, GPA: 4.5
(
)
)
|
Facilità d'uso
When the volume level between the front and rear speakers is equal, a single bar will be shown on the display panel. The display will automatically return to the normal indication 5 seconds after the last adjustment or when another function is activated. 8 LOUDNESS CONTOUR (LOU) When listening to music at low volume levels, this feature will boost the bass and treble ranges to compensate for the characteristics of human hearing. Press the LOU button to activate this feature as indicated by LOUD on the display panel. Pressing the button again will de-activate the function and LOUD will disappear from the display. 9 AUDIO ATTENUATION (ATT) The audio mute function is performed using the ATT (attenuator) button. This control is used to mute the volume from the system. When the ATT button is pressed, the indication ATT appears on the display panel and the volume will be muted. Pressing the ATT button again, or activating the VOL +/- function of the unit, will return to the volume level setting in use before the mute function was activated. bl TUNER, AM/FM BAND SELECTOR (TUNER) During radio play, each time the TUNER button is pressed, the radio band changes. The 6 OPERATING INSTRUCTIONS 7 OPERATING INSTRUCTIONS 7 OPERATING INSTRUCTIONS indications AM 1, AM 2, FM 1, FM 2 and FM 3 will appear on the display panel according to your selection. During FM operation, when the station is broadcasting in stereo, the stereo icon appears on the display, together with an ST indication. During AM operation, no indications are displayed, except the AM band. During CD play, pressing this button will change to radio operation without ejecting the disc. bm MANUAL UP/DOWN TUNING ( / ), STATION SEEK AND TRACK SELECTION Each time the Up Tuning side of the button ( ) is pressed, the radio will tune one frequency step higher. Similarly, each press of the Down Tuning side of the button ( ) will tune one frequency step lower. To manually tune in a station, press the appropriate directional side of the button until the desired frequency is reached. Pressing and holding either side of the button for longer than 0.5 second will cause the radio to continue tuning rapidly in the selected direction until the button is released, at which point it will seek the next available station and stop. During CD play operation, momentarily pressing and releasing either side of the button will increase or decrease CD track selection in sequence. Pressing and holding either side of the button for longer than 0.5 second, will cause the elapsed time of the current track in play to increase or decrease accordingly. bn AUTO-STORE TUNING (A/PS) PRE-SET SCAN TUNING Press the A/PS button momentarily to scan the 6 stations in the pre-set memories of the band in use. The unit will stop at each pre-set station for 5 seconds before continuing to the next pre-set station (the frequency on the display panel will flash during Pre-Set Scan operation). Press the button again momentarily to stop Pre-Set Scan operation and remain on the selected frequency. Pressing the button for longer than 2 seconds will activate the Auto-Store Tuning feature. The radio will automatically scan the band in use and enter strong stations into the pre-set memory positions for that band. If you have already set the pre-set memories of that band to your favorite stations, activating the Auto-Store Tuning feature will erase those stations and enter the new strong stations. This feature is most useful when traveling in a new area where you are not familiar with the local stations. bo STATION PRE-SET MEMORIES To set any of the 6 pre-set memory buttons, use the following procedure: 1. Turn the unit on and select the desired band. 2. Select the first station to be pre-set using the Manual Up/Down or Up/Down Seek Tuning functions bm. 3. Press the pre-set button to be set and continue to hold the button in. The pre-set number will appear on the display panel. The station is now set into the memory of that pre-set button and can be re-called at anytime by momentarily pressing that button. 4. Repeat the above procedure for the remaining 5 pre-sets on the band in use and for the other 4 bands of the unit. bp LIQUID CRYSTAL DISPLAY PANEL The Liquid Crystal Display (LCD) panel displays the frequency, time, and activated functions. NOTE:It is a characteristic of LCD panels that, if subjected to cold temperatures for an extended period of time, they may take longer to illuminate than under normal conditions. In addition, the visibility of the numbers on the LCD may slightly decrease. The LCD read-out will return to normal when the temperature increases to a normal range. bq DISC SLOT With the label surface facing up, gently insert the disc into the slot until the soft-loading mechanism engages and disc play begins. The indication and track number will appear on the display panel. NOTE: This unit is designed for play of standard 5" (12cm) Compact Discs ONLY. Do not attempt to use 3" (8cm) CD-Singles in this ...