RQTV0288 3 4 RQTV0288 Speakers Keep your speakers at least 10 mm (13/32”) away from the system for proper ventilation. These speakers do not have magnetic shielding. Do not place them near televisions, personal computers or other devices easily influenced by magnetism. You cannot take the front net off the speakers. • • • Note Caution Use the speakers only with the recommended system. Failure to do so may lead to damage to the amplifier and/or speakers, and may result in the risk of fire. Consult a qualified service person if damage has occurred or if you experience a sudden change in performance. Do not attach these speakers to walls or ceilings. • • 1 2 3 FM/AM antenna Taped part FM antenna AM antenna Headphones (not included) Reduce the volume level and connect the headphones. Plug type: 3.5 mm (1/8”) stereo Note 1 2 Red (+) Black (-) AC power supply cord To household AC outlet Conserving power The unit consumes 2.6 W even it is turned off with [8, POWER]. To save power when the unit is not to be used for a long time, unplug it from the household AC outlet. Remember to reset the radio stations and any other memory items before using the unit again. If the unit is left unplugged for longer than approximately two weeks, all settings will revert to the factory settings. Connect the AC power supply cord after all other connections are complete. Note Red Black Portable audio equipment (Cords and equipment not included) Portable audio player Plug type: 3.5 mm (1/8”) stereo . Start playback from the portable audio source. Note MAIN UNIT REMOTE CONTROL iPod connection Insert your iPod into the Built-in iPod Dock. . Refer to page 7 for further information. Unplug the antenna connector by holding the taped part. Stand the antenna up on its base. To prevent hearing damage, avoid listening for prolonged periods of time. Adjust the volume and sound quality of this unit and the other equipment. For details, refer to the instruction manual of the other equipment. • • Attach the stand to the unit . Page 3 for the buttons position of remote control and main unit. Connections Support stand (included) Rear of the main unit PC Sync Connect your PC to the PC Sync port. . Refer to page 7 for further information. 1 2 3 Placement of speakers Ensure the stand is securely attached to the main unit for stabilization. Insert the stand fully until a click sound is heard. The supplied stand is specially designed for use with this unit. Only use as indicated in this setup. • • Speakers are designed identically so that no left or right channel orientation is necessary. Note Basic play Disc operations . Page 3 for the buttons position of remote control and main unit. . Press [8, POWER] to turn the unit on. . Press [;, OPEN/CLOSE] to open the CD lid and then set the CD in place. Press [;, OPEN/CLOSE] again to close the lid. Keep fingers away from the CD lid when it is closing to avoid possible minor injury. Label must face outward. Press until you hear it click into place. . Press [CD q/h] to start play. . Adjust the volume. Note • Be sure to press the [;, OPEN/CLOSE] button to open and close the CD lid. • Damage may occur if the lid is forced closed. • During standby, if the CD is ready in the unit, the unit comes on and play begins. (One touch play) Stop Press [g]. Pause Press [CD q/h]. Press again to resume play. Skip/Search Press [u, 2] or [i, 1] to skip. Press and hold [u, 2] or [i, 1] to search. You can search during play or while paused. You cannot search through MP3 files. You can only search within the current track during program play, one track repeat, and random play. • • • Skip album Press [ or , ALBUM] in the play mode. Press [ or , ALBUM] once and then the numbered buttons in the stop mode. Direct access play (Play starts with the track you select.) Press the numbered buttons to select the desired track. . Press [ or , ALBUM ] to select the album. . Press [i, 1] once and then press the numbered buttons to select the desired track. Note MP3 CD MP3 Repeat play You can repeat program play or other selected play mode. Press [REPEAT] before or during play. “REPEAT ON” and “ & ” are displayed. To cancel Press [REPEAT] again. “REPEAT OFF” is displayed and “ & ” is cleared. Display function This function allows you to display the information of the current track. Press [DISPLAY] repeatedly during play or pause. CDMP3 Elapsed play time Remaining play time Elapsed time Album name Track name ID3 (Artist) ID3 (Track) ID3 (Album) Note • Maximum number of displayable characters: approximately 30. • This unit supports ver. 1.0 & 1.1 ID3 tags. Text data that is not supported will not be displayed. • ID3 is a tag embedded in MP3 tracks to provide information about the track. Note Program play . Press [PGM, -AUTO PRESET] while stopped. The function allows you to program up to 24 tracks. PGM CD . Press the numbered buttons to select tracks. (Maximum 24 tracks) Repeat this step to program other tracks. . Press [CD q/h] to start play. MP3 Trac...