valutazioni - 0, GPA: 0
(
)
)
|
Facilità d'uso
Supplied Accessories – AC power cord – Remote control Top/front panels (See 1) 1 PUSH TO OPEN – opens/closes the CD door. 2 POWER ON/OFF – switches the set on or off. 3 MAX SOUND – activates or deactivates the optimal mix of various sound features. 4 Display panel – shows the status of the set. 5 VOLUME+/- – adjusts volume level. 6 TUNING +/-– tunes to radio stations. 7 DBB – turns the bass enhancement on/off. 8 2; – star ts/ pauses CD/USB playback § / . – selects the next/previous track. – searches forwards/backwards (press and hold the button) within the current track. – stops disc/USB playback. – erases a program. 9 ALB -/+ – MP3-CD/USB: select albums. – MW/FM: selects a preset radio station (up, down). 0 PROG – programs tracks or radio stations. ! SOURCE – selects CD, USB, FM, MW or MP3 LINK source of sound. @ SHUFFLE – plays all CD/USB tracks in random order. # REPEAT – selects repeat modes. $ USB port – connects an external USB mass storage device. Back panel (See 1) % Telescopic antenna – improves FM reception. ^ Headphone jack – connects a headphone. & MP3 LINK – inlet for external audio source. * AC MAINS~ – inlet for power cord. ( Battery compartment – for6 batteries, type R-20/ UM-1/ D-cells. Remote control (See 2) 1 USB – selects USB mode. 2 CD – selects CD mode. 3 TUNER – selects TUNER (FM/MW) mode. 4 MP3 LINK – selects MP3 LINK mode. 5 PROG – programs tracks or radio stations. 6 2; – star ts/ pauses CD/USB playback ALBUM +/-– MP3 /WMA/USB only: selects albums § / . – selects the next/previous track. – searches forwards/backwards (press and hold the button) within the current track. 7 9 – stops disc/USB playback. – erases a program. 8 MUTE – mutes or restores the volume. 9 PRESET 3/4 – MW/FM: selects a preset radio station (up, down). 0 VOL+/-– adjusts volume level. ! REPEAT – selects repeat modes. @ SHUFFLE – plays all CD/USB tracks in ran dom order. # DBB – turns the bass enhancement on/off. $ MAX SOUND – activates or deactivates the optimal mix of various sound features. Power Supply Power Supply Whenever convenient, use the power supply cord if you want to conser ve battery life. Make sure you remove the plug from the set and wall outlet before inser ting batteries. Batteries (not included) 1 Open the battery door and insert 6 batteries, type R-20, UM-1 or D-cells, (preferably alkaline) with the correct polarity as indicated by the "+" and "–" symbols inside the compartment. 2 Close the batter y door, making sure the batteries are firmly and correctly in place.The set is now ready to operate. Batteries contain chemical substances, so they should be disposed of properly. • Incorrect use of batteries can cause electrolyte leakage and will corrode the compartment or cause the batteries to burst: • Do not mix batter y types: e.g. alkaline with carbon zinc. Only use batteries of the same type for the set. • When inserting new batteries, do not tr y to mix old batteries with the new ones. • Remove the batteries if the set is not to be used for a long time. Remote control (See 2) Important! • Before using the remote control, remove the insulation plastic tab as shown in figure 2. • If the remote control does not function correctly or the operating range is reduced, replace the battery with a new (CR2025) type battery. 1 Pull the battery tray out as shown in figure 2. 2 Replace a new battery according to polarity indication, and fully inser t the batter y tray back to the original position. • Incorrect use of batteries can cause electrolyte leakage and will corrode the compar tment or cause the batteries to burst. • Remove the batteries if the set is not to be used for a long time. • Batteries contain chemical substances, so they should be disposed of properly. Using AC power WARNING: Always check you have completely switched off the set, before you change or disconnect power supply. 1 Check if the power voltage, as shown on the type plate located on the bottom of the set, corresponds to your local power supply. If it does not, consult your dealer or ser vice center. 2 Connect the power cord to the AC~MAINS inlet and the wall socket. The set is now connected and ready for use. 3 To switch the set off completely, withdraw the power cord from the wall socket. 4 Install the unit near the AC outlet and where the AC power plug can be easily reached. • Disconnect the power cord from the wall socket to protect your set during heavy thunderstorms. Children could seriously injure themselves as the free end of the cable may still be live if only the connector is removed from the MAINS socket at the back of the unit. The type plate is located on the bottom of the set. General Operation Tuner General operation Switching on and off and selecting the function 1 To switch on the set, press POWER ON/OFF on the system. 2 To select your sound source, press SOURCE on the front panel of the system or the respective source buttons on the remote control: CD, TUNER, MP3 LINK or USB. 3 To switch off the set, press POWER O...