valutazioni - 0, GPA: 0
(
)
)
|
Facilità d'uso
2 Insert 6 x 1.5V R14/UM-2/C-cell batteries with correct polarity (+/-) as indicated. 3 Close the battery compartment. 6 x 1.5 V R14/UM2/C CELL Connect power Caution •• Risk of product damage! Ensure that the power supply voltage corresponds to the voltage printed on the back or the underside of the unit. Warning •• Risk of electric shock! When you unplug the DC adaptor, always pull the plug from the socket. Never pull the cord. Note •• Install the apparatus near the power supply socket and where the power plug can be easily reached. •• The type plate is located on the bottom of the main unit. Connect the power cord to the DC IN socket on the apparatus and to the power supply socket. Note •• To save energy: After use, set the switch to OFF. •• After this product keeps inactive for 15 minutes, it automatically switches to the normal standby mode 4 Play a CD Note • You cannot play CDs encoded with copyright protection technologies. You can play commercially available audio CDs: • CD-Recordables (CD-R) • CD-Rewritables (CD-RW) • MP3-CDs • WMA-CDs 1 Switch the source selector to CD. 2 Open the CD compar tment. 3 Inser t a CD with the printed side facing up and close the CD lid gently. » The total number of tracks displays. 4 Press to star t play. » [ ] displays. . • To select a track,press / • To pause CD play, press . • To resume CD play, press again. • To stop CD play, press . Find a passage within a track 1 During play, press and hold » The CD plays at high speed and with reduced volume. 2 Release to resume normal play. / . / Tip • When search reaches the end of the last track , the CD stops. Select an album For MP3-CDs only. 1 During play, press ALBUM+/- to select an album. Select play modes Press MODE repeatedly to select a play mode: • [ ] (repeat) – repeat a track • [ ALL] (repeat all) - repeat an entire CD/program • [ ] (shuffle) - play tracks randomly • [ ALL] (shuffle repeat all) - repeat all tracks randomly 2 To return to normal play, press MODE repeatedly until play mode icons are no longer displayed. Tip • Shuf fle play cannot be selected when you play programmed tracks. Program play sequence You can store up to 20 tracks in the desired sequence. 1 In stop mode, press PROG to star t to program play sequence. » [PROG] and [P01] are displayed. 2 For MP3-CDs: press ALBUM+/- to select an album. 3 Press to select a track. 4 Press PROG to store the track. » [PROG] and [P02] are displayed. 5 Repeat steps 2 to 4 to select and store all tracks. » When all 20 tracks are stored, no more tracks can be selected and the display shows [PROG] and [---]. 6 To play program, press . • In stop mode, press PROG repeatedly to browse stored tracks. • To cancel program, press twice. Tip / • When program play stops, the apparatus returns to normal play. To play program again, repeat steps 1 to 6. 5 Listen to an external device You can listen to an MP3 player through this apparatus. Note • When you connect an ex ternal device to MP3 LINK jack, the apparatus switches to MP3 LINK source automatically. 1 Use an MP3 link cable (supplied) to connect MP3 LINK jack (3.5mm) on this apparatus and the headphone jack on an MP3 player. 6 Listen to radio 1 Switch the source selector to FM or MW. 2 Turn TUNING+/- until you find optimal reception. Tip • To improve FM reception, you can ex tend, incline or turn the telescopic antenna for best reception. • To improve MW reception, turn the apparatus to face a different direction. 7 Product information Note • Product information is subject to change without prior notice. Dimensions (W x H x D) 341mm x 122mm x 236mm Weight 1.67 kg Power supply Model: SEF0800100E1BA; Input: 100-240 V~, 50/60 Hz, 0.3 A; Output: 8.0 V 1.0 A Power consumption Active <12 W Power output 2 x 1 W RMS Operating temperature range -10 °C - 50 °C 14 °F -122 °F 8 Troubleshooting Troubleshooting Warning • Never remove the cas ing of this apparatus. To keep the warranty valid, never tr y to repair the system yourself. If you encounter problems when using this apparatus, check the following points before requesting service. If the problem remains unsolved, go to the Philips web site (t). When you contact Philips, ensure that the apparatus is nearby and the model number and serial number are available. No power • Ensure that the power plug of the unit is connected properly. • Ensure that there is power at the AC outlet. No sound • Adjust the volume. • Ensure that the track played is of a compatible format. Display does not function properly./No reaction to any operation of the controls. • Disconnect the power cord. • Connect the power cord after a few seconds. Cannot play disc • Ensure that the disc label is inser ted with the printed side facing up. • Wipe the disc with fibre cleaning cloth from the centre to the edge in a straight line. • This disc may be defective. Play another disc. • Ensure that the CD is a finalised CD/CD-R /CD-RW. • Ensure that the laser lens is clean. • Ensure that the CD is no...