valutazioni - 0, GPA: 0
(
)
)
|
Facilità d'uso
b • Stop playing. c - ALBUM + • Skip to the previous or next album. d / • Skip to the previous or next track. • Search within a track. e OPEN•CLOSE • Open or close the disc compartment. f Tape controls • Start tape play. • / Fast rewind or fast forward the tape. Stop the tape play or open the tape door. • Pause tape play or pause recording. g • Start or pause play. EN h PROG • Program the play sequence of tracks. i MODE • Select a play mode. j Display panel • Display current status. k FM antenna • Improve FM reception. l + TUNING - • Tune to FM radio stations. m • USB socket. n Source selector • Select a source. o + VOLUME - • Adjust volume p SD • Micro SD card slot. q AC~MAINS • Power supply socket. r AUDIO-IN • Connect an external audio device. 3 Get started Caution ••Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation. Always follow the instructions in this chapter in sequence. If you contact Philips, you will be asked for the model and serial number of your apparatus. The model number and serial number are on the bottom of your apparatus. Write the numbers here: Model No. __________________________ Serial No. ___________________________ Connect power The unit can be powered by either AC power or batteries. Option 1: AC power Warning ••Risk of product damage! Make sure that the power supply voltage corresponds to the voltage printed on the back or the underside of the unit. ••Risk of electric shock! When you disconnect the AC power, always pull the plug from the socket. Never pull the cord. Connect the AC power cord to the wall socket. Tip ••To save energy, turn the unit off after use. EN AC~MAINS Option 2: Battery power Caution ••Batteries contain chemical substances, so they should be disposed of properly. Note ••Batteries are not supplied with the accessories. 1 Open the battery compartment. 2 Insert 6 batteries (type: 1.5V R14/UM2/C CELL) with correct polarity (+/-) as indicated. 3 Close the battery compartment. Turn on Switch the source selector on the main unit to FM/USB/SD/CD. »»When the source selector is in the CD position, CD is displayed. Switch to standby mode • The unit switches to standby mode automatically when there is no audio detected for over 15 minutes. • Press to wake up the unit from standby mode. Turn off Switch the source selector on the main unit to OFF. EN 4 Play Play a CD Note ••You cannot play CDs encoded with copyright protection technologies. ••When an audio-in cable is plugged, CD/USB playback stops, and the unit switches to audio in mode automatically. You can play commercially available audio CDs: • CD-Recordables (CD-R) • CD-Rewritables (CD-RW) • MP3-CDs 1 Switch the source selector to CD. 2 Open the CD compartment. 3 Insert a CD with the printed side facing up and close the CD lid gently. »»The total number of tracks displays. »»Your CD sound machine starts to play automatically. • To select a track,press / . • To pause CD play, press . »»[ ] flashes. • To resume CD play, press again. • To stop CD play, press . CDUSB/SD FMTAPE/OFFAUDIO IN Play from an external device You can also listen to an external audio device through this unit. 1 Connect an audio cable (3.5mm, not supplied) to: • the AUDIO-IN socket on the unit. • the headphone socket on an external device. »»"Au" shows on the display. 2 Play the external device (see the device's user manual). Note ••The AUDIO-IN socket is not for headphones. ••The display panel lights off when the unit plays from the external device. ••The unit switches to Audio in mode automatically when it plays under CD or SD/USB mode. AUDIO-IN EN Play from USB devices Note ••Make sure that the USB device contains playable audio content. 1 Switch the source selector to USB/SD. 2 Insert the USB device into the socket. 3 Press down SD/USB source selector to choose USB source. »»"USB" shows on the display. »»The unit starts to play. If not, press . CDUSB/SD FMTAPE/OFFAUDIO INSD USB Play from SD card Note ••Make sure that the SD card contains playable audio content. 1 Switch the source selector to USB/SD . 2 Insert the SD card into the SD slot on the back of the device. 3 Press to release the SD/USB source selector to choose SD source. »»"SD" shows on the display. »»The unit starts to play,If not, press . CDUSB/SD FMTAPE/OFFAUDIO INSDSD USB EN Play tape 1 Slide the source selector to TAPE. 2 Press on main unit to open the tape door. 3 Load the tape with the open side upward and the full spool to the right. 4 Press on main unit to start play. • To pause/resume play, press on main unit . • To rewind or fast-forward, press / on main unit . • To stop play, press . CDUSB/SD FMTAPE/OFFAUDIO IN Tune to FM radio stations Note ••For optimal reception, fully extend and adjust the position of the FM antenna. 1 Switch the source selector to FM. 2 Rotate TUNING to select a station. 3 Repeat step 2 to tune to more stations. CDUSB/SD FMTAPE/OFFAUDIO IN EN 5 Play options...