valutazioni - 0, GPA: 0
(
)
)
|
Facilità d'uso
If you contact Philips, you will be asked for the model and serial number of your apparatus. The model number and serial number are on the bottom of your apparatus. Write the numbers here: Model No. __________________________ Serial No. ___________________________ Connect power The unit can be powered by either AC power or batteries. Option 1: AC power Warning ••Risk of product damage! Make sure that the power supply voltage corresponds to the voltage printed on the back or the underside of the unit. ••Risk of electric shock! When you disconnect the AC power, always pull the plug from the socket. Never pull the cord. Connect the AC power cord to the wall socket. Tip ••To save energy, turn the unit off after use. Option 2: Battery power Caution ••Batteries contain chemical substances, so they should be disposed of properly. Note ••Batteries are not supplied with the accessories. 1 Open the battery compartment. 2 Insert 6 batteries (type: 1.5V R14/UM2/C CELL) with correct polarity (+/-) as indicated. 3 Close the battery compartment. EN Turn on Press . »»When the source selector is in the AUDIO-IN/CD position, is displayed. Switch to standby mode • The unit switches to standby mode automatically when there is no audio detected for over 15 minutes. • Press to wake up the unit from standby mode. Turn off Press again. 4 Play Play a CD Note ••You cannot play CDs encoded with copyright protection technologies. You can play commercially available audio CDs: • CD-Recordables (CD-R) • CD-Rewritables (CD-RW) 1 Switch the source selector to AUDIO-IN/ CD. 2 Open the CD compartment. 3 Insert a CD with the printed side facing up and close the CD lid gently. »»The total number of tracks displays. 4 Press to start play. »»[ ] displays. • To select a track,press / . • To pause CD play, press . »»[ ] flashes. • To resume CD play, press again. • To stop CD play, press . EN Play from an external device You can also listen to an external audio device through this unit. 1 Switch the source selector to AUDIO-IN/ CD. 2 Connect an audio cable (3.5mm, not supplied) to: • the AUDIO-IN socket on the unit. • the headphone socket on an external device. 3 Play the external device (see the device's user manual). Note ••The AUDIO-IN socket is not for headphones. ••The display panel lights off when the unit plays from the external device. Audio-in Play tape Note ••The unit will turns off automatically after an elapsed time of inactivity at tape mode. 1 Slide the source selector to TAPE. »»The unit turns on automatically. 2 Press on main unit to open the tape door. 3 Load the tape with the open side upward and the full spool to the right. 4 Press on main unit to start play. • To pause/resume play, press on main unit . • To rewind or fast-forward, press / on main unit . • To stop play, press . »»The unit turns off automatically. EN Tune to FM radio stations Note ••For optimal reception, fully extend and adjust the position of the FM antenna. 1 Switch the source selector to FM. 2 Rotate TUNING to select a station. 3 Repeat step 2 to tune to more stations. 5 Play options Control play In CD mode, you can control play through the following operations. / Press:skip to the previous/next track Hold:search within play, then release to resume play. Start or pause play. Stop play. PROG Program tracks. +VOLUME- Adjust volume. REPEAT [ ]: Play the current track repeatedly. [ ]: Play all tracks repeatedly. [ ]: Repeat all tracks randomly. To return to normal play, press REPEAT repeatedly until the repeat icons disappear. SHUFFLE [ ]: Play tracks randomly. To return to normal play, press SHUFFLE repeatedly until the shuffle icon disappear. Tip ••Only [ ] and [ ] can be selected when you play the programmed tracks. EN Program tracks In CD mode, you can program a maximum of 20 tracks. 1 Press to stop playback. 2 Press PROG to activate the program mode. »»[PROG] (program) begin to blink. 3 Press / to select a track number, then press PROG to confirm. 4 Repeat steps 3 to program more tracks. 5 Press to play the programmed tracks. »»During play, [PROG] (program) is displayed. • To erase the program, press twice. • To review the program, when playback is stopped, press and hold PROG for 2 seconds. Adjust sound During play, you can adjust volume and select the sound effects. Key Function +VOLUME- Increase or decrease volume. DBB Turn dynamic bass enhancement on or off. 6 Product information Note ••Product information is subject to change without prior notice. Specifications Amplifier Max Output Power Total 2 W RMS Frequency Response 125 -16000 Hz, -3dB Signal to Noise Ratio >55 dBA Total Harmonic Distortion <1 % Audio-in Input 650 mV RMS Disc Laser Type Semiconductor Disc Diameter 12cm/8cm Support Disc CD-DA, CD-R, CD-RW Audio DAC 24Bits / 44.1kHz Total Harmonic Distortion <1% Frequency Response 125 -16000 Hz, -3dB S/N Ratio >55 dBA Tuner Tuning Range 87.5 - 108MHz Tuning grid 50 kHz Total Harmonic Distortion <3% EN Signal to Noise Ratio >50 dBA Tape deck Frequency...