The 8% button will assign +/- 8% to the PITCH CONTROL SLIDE (27). The 16% button will assign +/- 16% to the PITCH CONTROL SLIDE (27). The PITCH (25) button must be ON for the VPS (28) to work. (5) OPERATING INSTRUCTIONS: 1. Make sure that the VOLTAGE SELECTOR SWITCH (1), found on the rear panel, is set for the proper voltage. Plug the unit in and press the POWER (6) switch. The unit is ON. Pushing POWER (6) a second time turns the unit OFF. 2. Press OPEN/CLOSE (8) and place a CD in the DISC
Press LOOP OUT (17) again or pause play to exit the repeating play. RELOOP: Press for repeated loop play (stutter) from the first loop point or to reloop a previously set loop. The RELOOP (18) function automatically returns the music to the loop point and will play the loop until it is released with the LOOP OUT (17) button. CD starts instant play from the previously set cue points. PITCH SELECT: Pressing the PITCH SELECT (19) buttons enable you to select pitch levels ranging from 4%, 8%, & 16%.
This state of the art professional CD player is backed by a three year warranty, excluding lasers. One year warranty on CD lasers. Prior to use, we suggest that you carefully read all the instructions. 1 Seamless Looping & Instant Reverse Anti-Shock Using RAM Buffer Memory Large Soft Touch Rubber Jog Wheel LED Target Light for Draw Mechanism FEATURES: • 5 Hot Cue Points & BOP Feature • Real Time Scratching • Auto BPM Within LCD Display • Fully Adjustable Brake & Start • Variable Pitch Con
Press the STOP (8) button, place a CD in the DISC TRAY (7) and press (18) button in PLAY mode, repeats the section between the CUE POINT the STOP (8) button again. The tray will close into the unit. and the point where the CUE-B/EXIT (18) button was pressed. Press the CUE-B/EXIT (18) button again or pause play to exit the repeating play. 3. Push the TRACK (13) buttons to select the track you want to play. RELOOP/STUTTER: RELOOP/STUTTER (19) is used for repeated play (stutter) from the cue poi
Place the track in PAUSE mode. This will activate the stutter mode. Then use the JOG WHEEL (23) for fast, precise searching. SEE JOG WHEEL (23) for more info. Once you have found the point at which you would like to begin playing, do not further adjust the JOG WHEEL (23). Then press PLAY/PAUSE (8) rapidly. Then CUE (7) LED will blink. Your CUE is now stored into the unit's memory. Press CUE (7) to scan to the CUE point. This will pause the CD at the point of cue. Press and hold the CUE (7) but
LOOP: After a cue point is programmed, pressing LOOP (11) while in the PLAY mode (CUE LED blinks yellow) repeats the section between the cue point and the point where the LOOP button was pressed. Press EXIT/RETURN or PAUSE/PLAY to EXIT Loop repeat. EXIT/RETURN: Press loop EXIT/RETURN (12) to return to the beginning of the previously saved loop from normal play. SINGLE-AUTO CUE/CONTINUOUS: Pressing SINGLE-AUTO CUE/ CONTINUOUS (5) activates the AUTO CUE FUNCTION. The Auto Cue causes the CD to paus
To eliminate confusion, only the CDX601 illustration is fully numbered. Controls placed in different locations or not duplicated are theROBO START (25) and POWER (1) switches. WICHTIGER HINWEIS Der CDX-602 ist ein DoppelCD- Spieler, wiederholen sich die meisten Funktione und Steuervorrichtungen auf beiden Seit des CD-Spielers CDX-601 und CDX-602. Um Verwirrung vorzubeugen und die Zeichnungen leichter verstandlich zu machen sind nur die Funktionen und Steuervorrichtungen auf der CDX601 Seite mit
If you are connecting the CDX-402 through a receiver, you can plug the RCA connectors into the CD or AUX INPUT JACKS on your receiver. If there are no CD or AUX INPUTS, use any line level (not phono) inputs. 5. Connect any type of device that will accept a DIGITAL signal, such as DAT, MD, HARD DRIVE, ETC to the BNC (5) OUTPUTS on the rear panel of the transport to record a DIGITAL signal. • +/- 12% Pitch with Pitch bend • Single auto-cue / continuous play • Looping • Digital output (BNC-SPD
In addition, the CDM-3700G comes equipped with a built in integrated 2-channel mixer that features a 3-Band EQ per channel with Gain Control, Mic Channel effects such as Echo, Repeat and Delay and Auxiliary Inputs for Phono or Line devices, offering optimum control of your music. FEATURES Includes all features above in CDX-2500G and also: > 3 Video Outputs for multiple screen use Auxiliary Inputs for Phono or Line Devices Echo, Repeat, & Delay Effects SPECIFICATIONS Direct Track Access Butt
PITCH: Pushing the PITCH button (the button will light up blue) activates the PITCH CONTROL SLIDE. The pitch or speed of the CD will change plus or minus 12% depending on the position of the PITCH CONTROL SLIDER. Push the PITCH button again to deactivate this mode. PITCH CONTROL SLIDE: Moving the PITCH CONTROL SLIDE up or down will lower or raise the pitch percentage + or - 12%. PITCH BEND: Pushing the PITCH BEND BUTTONS will automatically raise the pitch up to +16% or lower the pitch down to -1