valutazioni - 0, GPA: 0 ( )

Produttore : Philips File Size : 147.9 kb File Nome : Lingua di insegnamento:

The scale filter is designed to prevent these scale particles from being poured out by trapping them within the kettle. Cleaning the scale filter To avoid an excessive amount of limescale building up inside your kettle, it is important that both the kettle and filter are cleaned on a regular basis. Scale can be removed from the filter by -running it under a tap, whilst gently brushing with a soft nylon brush (fig. 6); -or by soaking the filter in vinegar or a proprietary descaling agent. • Before removing the filter (for replacement or cleaning): -Ensure that the kettle is unplugged from the mains. -Do not attempt to remove the filter when hot or when the kettle contains hot water. • Never leave the filter loose inside the kettle. Ensure that the filter is always correctly placed between the two ribs. -Slide the filter downwards until it clicks into position (fig. 7). Periodically: descaling In the course of time, a build-up of limescale may occur on the filter gauze, reducing the filling (via the spout) and pouring performance of the kettle. Limescale adhered to the heating element will reduce the heating capacity. Therefore, the kettle with the filter in place, should be descaled periodically as indicated in section "Descaling". Replacement filters Replacement filters can be obtained under type nr. HD 4961 from your Philips dealer. Scale filters can also be applied with kettles type HD 4390 if provided with locating ribs (see fig. 7). Descaling Descale the kettle regularly. With normal use: at least twice a year. - Boil 700 ml of water in the kettle. -Switch off and unplug from the electrical supply. - Add 300 ml of ordinary vinegar to the water in 5 the kettle. -Leave the solution to stand in the kettle overnight. -Empty out the solution into e.g. a jug. Rinse the inside of the kettle with clean water. -Fill the kettle with clean water up to the "MAX" level. -Boil the water and empty the kettle. Rinse the inside of the kettle with clean water. If any scale remains: -Pour the water & vinegar solution into the kettle again. -Reheat the solution until it starts to fizz again. Then switch off and unplug from the electrical supply. Do not boil. -Leave the hot solution in the kettle until the fizzing stops. -Empty out the solution into e.g. a jug and rinse the inside of the kettle thoroughly. -Fill the kettle with clean water up to the "MAX" level. -Boil the water and empty the kettle. Rinse the inside of the kettle with clean water. Fitting a plug Connections - Applicable to U.K. only IMPORTANT WARNING - THIS APPLIANCE MUST BE EARTHED The wires in this mains lead are coloured in accordance with the following code: GREEN AND YELLOW - EARTH BLUE - NEUTRAL BROWN - LIVE As the colours of the wires in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: The wire which is coloured GREEN AND YELLOW must be connected to the terminal which is marked with the letter “E” or ...

Scarica la tua

Per scaricare, digitare 2 cifre :