|
Facilità d'uso
Descale your kettle regularly by following the instructions given in the chapter 'Descaling'. Boil-dry protection This kettle is equipped with boil-dr y protection.This device will automatically switch the kettle off if it is accidentally switched on when there is no water or not enough water in it.The on/off switch will stay in 'on' position and the pilot light, if available, will stay on. Switch the kettle off and let it cool down for 10 minutes.Then lift the kettle from its base to reset the boil-dr y protection.The kettle is ready for use again. Before first use . Remove stickers, if any, from the base or kettle. . Place the base on a dry, stable and flat surface. . Adjust the length of the cord by winding it round the reel in the base. Pass the cord through one of the slots in the base (fig. 2). Before using the kettle for the first time: 1 2 3 Rinse the kettle with water. Fill the kettle with water up to the maximum level and let it boil once (see 'Using the appliance'). Pour out the hot water and rinse the kettle once more. Using the appliance 1 Fill the kettle with water either through the spout or through the open lid (fig. 3). 4222 001 97231 2 3 4 5 ENGLISH HD4666, HD4665, HD4603, HD4602 4222 001 97231 2 Close the lid. Make sure that the lid is properly closed to prevent the kettle from boiling dr y. 3 Place the kettle on its base, put the plug in the wall socket and press the on/off switch (fig. 4). The kettle star ts heating up. . The kettle switches off automatically when the water has reached boiling point. . You can interrupt the boiling process by pressing the on/off switch. Cleaning and descaling Always unplug the appliance before cleaning it. Do not use any abrasive cleaning agents, scourers etc. to clean the kettle. Never immerse the kettle or its base in water. 1 Cleaning the kettle Clean the outside of the kettle with a soft, damp cloth moistened with warm water and some mild cleaning agent. Scale is not harmful to your health but it may give your drink a powdery taste.The scale filter prevents scale par ticles from ending up in your drink. Clean the scale filter regularly. 2 The filter can be cleaned: . by taking it out of the kettle and gently brushing the filter with a soft nylon brush under a running tap, or.. (fig. 5). . by leaving it in the kettle when descaling the whole appliance, or... . in the dishwasher. Descaling the kettle Regular descaling will prolong the life of the kettle. In case of normal use (up to 5 times a day), the following descaling frequency is recommended: -Once every 3 months for soft water areas (up to 18 dH). -Once every month for hard water areas (more than 18 dH). 1 2 3 4 5 6 Fill the kettle with water up to three-quarters of the maximum level and bring the water to the boil. After the kettle has switched off, add white vinegar (8% acetic acid) to the maximum level. Leave the solution in the kettle overnight. Empty the kettle and rinse the inside thoroughly. Fill the kettle with clean water and...
Questo manuale è adatto anche per i modelli :Bollitori - HD4602/71 (394.72 kb)
Bollitori - HD4602/20 (394.72 kb)
Bollitori - HD4603/71 (394.72 kb)