valutazioni - 6, GPA: 4.3
(
)
)
|
Facilità d'uso
The following are the initial factory defaults for these settings. Auto DST (AUTO) DST off (OFF) DST on (ON) Setting City code DST (summer time) Auto receive Initial Factory Default NYC(New York) DST(Auto switching) AUTO(Auto receive) ONTimekeeping • The day of the week is automatically displayed in accordance with the date (year, month, and day) settings. • The year can be set in the range of 2000 to 2099. • The watch’s built-in full automatic calendar makes allowances for different month lengths and leap years. Once you set the date, there should be no reason to change it except after you have the watch’s battery replaced or when battery power drops to Level 4. • The current time for all city codes in the Timekeeping Mode and World Time Mode is calculated in accordance with the Greenwich Mean Time (GMT) differential for each city, based on the your Home City time setting. • GMT differential is calculated by this watch based on UTC* data. *The letters “UTC”stands for “Universal Time Coordinated,”which is the world-wide scientific standard of timekeeping. It is based upon carefully maintained atomic (cesium) clocks that keep accurate to within microseconds. Leap seconds are added or subtracted as necessary to keep UTC in sync with the Earth’s rotation. The reference point for UTC is Greenwich, England. 12-hour/24-hour Timekeeping Formats The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode is also applied in all other modes. • With the 12-hour format, the P (PM) indicator appears on the display for times in the range of noon to 11:59 p.m. and the A (AM) indicator appears for times in the range of midnight to 11:59 a.m. • With the 24-hour format, times are displayed in the range of 0:00 to 23:59, without any indicator. Power Saving Function When turned on, the Power Saving function automatically enters a sleep state whenever the watch is left in an area where it is dark for a certain period. The table below shows how watch functions are affected by the Power Saving function. • Wearing the watch inside the sleeve of clothing can cause it to enter the sleep state. • The watch will not enter the sleep state between 6:00 AM and 10:59 PM. If the watch is already in the sleep state when 6:00 AM arrives, however, it will remain in the sleep state. Torecover from the sleep state Perform any one of the following operations. • Move the watch to a well-lit area. It can take up to two seconds for the display to turn on. • Press any button. • Angle the watch towards your face for reading. Toturn Power Saving on and off 1. In the Timekeeping Mode, hold down A. This causes the city code to flash, which indicates the setting screen. 2. Press A again. 3. Press C seven times until the Power Saving on/off screen appears. 4. Press D to toggle Power Saving on (ONONONONON) and off (OFFOFFOFFOFFOFF). 5. After the setting is the way you want, press A to exit the setting screen. • The Power Saving on indicator is on the display in all modes while the Power Saving is turned on. Backlight Precautions • The electro-luminescent panel that provides illumination loses power after very long use. • The illumination provided by the backlight may be hard to see when viewed under direct sunlight. • The watch may emit an audible sound whenever the display is illuminated. This is due to vibration of the EL panel used for illumination, and does not indicate malfunction. • The backlight automatically turns off whenever an alarm sounds. • Frequent use of the backlight shortens the battery operating time. Auto light switch precautions • Wearing the watch on the inside of your wrist as well as movement or vibration of your arm can cause the auto light switch to activate and illuminate the display. To avoid running down the battery, turn off the auto light switch whenever engaging in activities that might cause frequent illumination of the display. • The backlight may not light if the face of the watch is more than 15 degrees above or below parallel. Make sure that the back of your hand is parallel to the ground. • The backlight turns off in about one second, even if you keep the watch pointed towards your face. • Static electricity or magnetic force can interfere with proper operation of the auto light switch. If the backlight does not light, try moving the watch back to the starting position (parallel with the ground) and then tilt it back toward you again. If this does not work, drop your arm all the way down so it hangs at your side, and then bring it back up again. • Under certain conditions, the backlight may not light until about one second after you turn the face of the watch towards you. This does not necessarily indicate malfunction of the backlight. • You may notice a very faint clicking sound coming from the watch when it is shaken back and forth. This sound is caused by mechanical operation of the auto light switch, and does not indicate a problem with the watch. Elapsed Time in Dark 60 to 70 minutes 6 or 7 days Displ...
Questo manuale è adatto anche per i modelli :Orologi - 2608 (793.01 kb)
Orologi - 2638 (793.01 kb)