valutazioni - 0, GPA: 0
(
)
)
|
Facilità d'uso
REPEAT ALARM This repeats your alarm call at 9 minute intervals. • During the alarm call, press REPEAT ALARM / BRIGHTNESS CONTROL.. ™ Display shows ALM1 or ALM2 flashing during a repeat alarm. • Repeat if desired (up to a maximum of 6 times). CANCELING THE ALARM COMPLETELY • Press ALM 1 or ALM 2 button once or more until ALM1 or ALM2 disappears. DOCK (See 4) By connecting the iPod/Philips GoGear to your AJ300D, you can listen to the sound of the docked player through the powerful speakers of the Hi-Fi system. Important! • AJ300D comes with two dock types. Use the designated dock type, as indicated on the top panel of the dock supplied, to work with either Apple iPod or Philips GoGear. COMPATIBLE PORTABLE PLAYER • Apple iPod models with 30-pin dock connector as follows: Nano 1st /2nd/3rd generation, iPod 5th generation (video), iPod touch and iPod classic. • Philips GoGear players with dock connectors as follows: -HDD1420, HDD1620, HDD1630, HDD1635; -HDD1820, HDD1830, HDD1835; -HDD1840, 1850; -HDD6320, HDD6330 -SA9100, SA9200 CHANGING THE DOCK The iPod connector is pre-installed with the AJ300D main unit. For Philips GoGear users, change to the supplied Philips GoGear connector before use. 1 Slide the dock switch located near the dock connector to . 2 Take the dock out. 3 Correctly place the suitable dock in. Then firmly hold down the dock, and simultaneously push the dock switch back to position. DOCK ADAPTERS Before plugging your player in the dock, snap the suitable dock adaptor into the dock to provide a snug fit for the player to be docked. Selecting the correct dock adaptor • 4 iPod dock adaptors are included. Each adaptor has indication to match different iPod types. • For the Philips GoGear dock, 4 dock adaptors of different type are included. Each adaptor is marked a number from “1” to “4” at its back. These numbers indicate the fit Philips GoGear players as follows: “1” = HDD6320/6330 “2” = HDD1420/1620/1630/1635/1820/1830/1835 “3” = HDD1840/1850 “4” = SA9100/SA9200 PLAYING APPLE iPod/PHILIPS GoGear USING AJ300D 1 Snap the compatible iPod/GoGear into the dock connector. 2 Press DOCK to switch on the dock mode. • Make sure that you have powered on Philips GoGear before selecting DOCK source. ™ On the AJ300D’s display, “HDD” is displayed when GoGear player is connected, or “iPod” is displayed when iPod is connected. 3 For iPod, the connected player will play automatically. • For Philips GoGear, press 2; to start playback if the playback doesn’t start. Notes: – In dock mode, if no player is docked for 15 minutes, AJ300D will come to standby. – By using the buttons ( 2;, .1, 2™ and VOLUME ) on the AJ300D and its remote control, the following disc playback features are available: Play/Pause, selecting next/previous track, fast forwarding/rewinding (only available to Apple iPod) and changing volume. – The buttons ( 2;, .1, 2™ and VOLUME ) on the AJ300D and its remote control can work only with playback of the audio contents stored on the docked player. CHARGING iPod/PHILIPS GoGear BATTERY USING THE DOCK Docking your iPod/Philips GoGear and connecting the dock to AJ300D, you can charge the iPod/GoGear in the standby mode and power-on mode of AJ300D. SLEEP This set has a built-in sleep timer, which enables the radio to be automatically switched off after a set period of time. There are five sleep time options. Setting and switching off SLEEP 1 During playback, set your timer by pressing SLEEP repeatedly until the desired timer option appears. ™ Selections are follows (time in minute): 120=90=60=30=15=OFF=120 2 The set will turn off automatically at the selected time. 3 To cancel sleep, press either: – POWER – SLEEP once or more until SLEEP disappears from the display. Reset Should your set receive external interference e.g. static electricity from carpets, thunderstorms, etc. RESET allows you to clear all previous settings and start up again. • Use a ballpoint pen to press the RESET hole found on the bottom of the set. CONNECTING AN EXTERNAL DEVICE You can listen to the sound of the connected external device through your AJ300D’s speakers. 1 Press TUNER/AUX twice to select AUX mode. 2 Use the supplied AUX-IN cable to connect AJ300D’s AUX IN jack to an AUDIO OUT or headphone jack on an external equipment (such as CD player, or VCR). MAINTENANCE & SAFETY • Install the unit near the AC outlet and where the AC power plug can be easily reached. • The apparatus shall not be exposed to dripping or splashing. • Do not expose the set to humidity, rain, sand or excessive heat caused by heating equipment or direct sunlight. • To clean your set, use a soft damp cloth or chamois leather. Do not use cleaning products, which contain benzene, thinner, etc. as these may harm the housing. • Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnet device shall remain readily operable. • Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine,...