valutazioni - , GPA:
(
)
)
Produttore : Philips
File Size : 392.47 kb
File Nome :
Lingua di insegnamento: 
Il documento viene caricato, si prega di attendere
 |
Il documento viene caricato, si prega di attendere
Facilità d'uso
5 Set the alarm timer You can set two separate alarms. For the alarm tone, you can select the FM radio, or the buzzer. 1 Before you star t, ensure that the time is set correctly. 2 Press and hold ALARM 1/ALARM 2 for two seconds. » AL1 or AL2 is displayed and the hour digits and days begin to blink. 3 Switch ALARM 1 BUZZ/RADIO or ALARM 2 BUZZ/RADIO to buzz or radio to select alarm sound for alarm 1 and 2 respectively. 4 Press TUNING+/- repeatedly to set the hour. » appears and AL1 or AL2 begins to blink. 5 Press ALARM 1/ALARM 2 to confi rm. » The minute digits begin to blink. 6 Press TUNING+/- to set the minute. 7 Press ALARM 1/ALARM 2 to confi rm. » The weekdays begin to blink. 8 Press WEEKDAY/WEEKEND ALARM to select whether to ring alarm on weekdays or at weekend. 9 Press ALARM 1/ALARM 2 to confi rm. » AL1 or AL2 is displayed. » The apparatus turns on automatically at the set time and rings with radio or buzz. Turn on/off the alarm timer D Note • Ensure that you already set the alarms successfully. 1 Press ALARM 1 or ALARM 2 to turn on or off the alarm timer. » If the alarm timer is turned on, AL1 or AL2 appears. » If the alarm timer is turned off, disappears. Repeat alarm 1 When the alarm rings, press REPEAT ALARM/BRIGHTNESS CONTROL. » The alarm repeats ringing minutes later. E Tip • You can press TUNING+/- to adjust inter val (5-15 minutes) to repeat alarm. Reset alarm 1 When the alarm rings, press SLEEP/ALARM RESET. » The alarm stops but the alarm settings remain. Stop alarm ring 1 When the alarm rings, press the corresponding ALARM 1 or ALARM 2. » The alarm stops but the alarm settings remain. View the alarm settings 1 Press ALARM 1 or ALARM 2 to view the alarming setting time. » [ AL1] or [ AL2 ] appears. Other features Set the sleep timer You can set the clock radio to turn off automatically after a cer tain period of time. 1 Press SLEEP/ALARM RESET repeatedly to select time (in minutes). » The apparatus turns off automatically after the set period of time. To turn off the sleep timer: 1 Press SLEEP/ALARM RESET repeatedly until [OFF] (off) appears or press RADIO ON/OFF. » is displayed when sleep timer is on and disappears when it is off. Charge a mobile phone (See 3) D Note • The accompanied charging adapters do not suppor t all types of mobile phones. Refer to the appended compatibility sheet to see if your phone is suppor ted. 1 Press PRESS TO OPEN to open the compar tment. 2 Select a charger adapter that matches your mobile phone. 3 Take out the cable with a connector. 4 Connect the charger adapter to . • the connector or the USB charging cable (not supplied) • your mobile phone. After charging finishes, 1 Disconnect the device from the charge adapter. 2 Disconnect the charger adapter and save it in the compar tment. (See 3) Product information D Tip • Product information is subject to change without prior notice. Specifications Tuner (FM) Tuning Range 87.5 - 108MHz Tuning grid 50KHz Sensitivity - Mono, 26dB S/N Ratio <22 dBf Search Selectivity >28dBf Total Harmonic Distor tion <3% Signal to Noise Ratio >50dB General information Power adapter Model: AS150-065-AF Philips Input: 100-240V~50/60 Hz, 0.7A Output: 6.5V DC, 2.3A Operation Power Consumption 20W Standby Power Consumption 0.5W Dimensions -Main Unit (W x H x D) 180 x 50 x 133 mm Weight -With Packing0.725 kg -Main Unit 0.435 kg Troubleshooting E Caution • Never remove the casing of this apparatus. To keep the warranty valid, never tr y to repair the system yourself. If you encounter problems when using this apparatus, check the following points before requesting ser vice. If the problem remains unsolved, go to the Philips web site (t). When you contact Philips, ensure that your apparatus is nearby and the model number and serial number are available. No power • Ensure that the AC power plug of the apparatus is connected properly. • Ensure that there is power at the AC outlet. No sound • Adjust the volume. No response from the apparatus • Disconnect and reconnect the AC power plug, then turn on the apparatus again. • Use a ball pen to press the reset button on the rear of the apparatus to restore factor y settings.This operation resets all settings except the clock. Poor radio reception • Increase the distance between the apparatus and your TV or VCR. • Fully extend the antenna. • Connect an outdoor antenna instead. Timer does not work • Set the clock correctly. • Switch on the timer. Clock/timer setting erased • Power has been interrupted or the power plug has been disconnected. • Reset the clock/timer. Chareger does not charge the connected device • Make sure the USB cable is properly inser ted into the device and the charger. • Make sure the adapter suits the connected device well. • Damaged USB cable or connector tip.Replace USB cable and/ or connector tip. • Wrong connector tip used. Check connector tip and replace if necessar y. • Non supplied USB cable/connector tip used. Replace with supplied USB cable/connector ...