valutazioni - , GPA:
(
)
)
Produttore : Casio
File Size : 860.29 kb
File Nome : qw3095.pdf
Lingua di insegnamento: 
Il documento viene caricato, si prega di attendere
 |
Il documento viene caricato, si prega di attendere
Facilità d'uso
• In all modes, the alarm on indicator is shown for any alarm that currently is turned on. • The alarm on indicator flashes while the alarm is sounding. • The snooze alarm indicator flashes while the snooze alarm is sounding and during the 5-minute intervals Snooze alarm between alarms. indicator Alarm on indicator On/Off status 4 Operation Guide 3095 End time Start time To configure Hourly Time Signal settings 1. In the Alarm Mode, use D to display the Hourly Time Signal (SIG) screen. 2. Hold down A until the Hourly Time Signal start time starts to flash. This is the setting screen. • This also will turn on the Hourly Time Signal. 3. Press C to move the flashing in the sequence shown below to select other settings. Start Time (from) End Time (to) Repeat Pattern (REP) 4. While a setting is flashing, use D (+) and B (–) to change it. • When the start time and end time settings specify a period that is 24 hours long (such as a start time of 7:00 a.m. and an end time of 6:00 a.m.), ALL is displayed for both the start time and the end time. • You can select any one of the three Hourly Time Signal repeat patterns described below. Hourly time signal on indicator On/Off status 5. Press A to exit the setting screen. • With the 12-hour format, set the time correctly as a.m. (A). or p.m.(P). To turn the Hourly Time Signal on or off 1. In the Alarm Mode, use D to display the Hourly Time Signal (SIG) screen. 2. Press B to toggle the Hourly Time Signal on (on) and off (OFF). • An Hourly Time Signal on indicator is on the Alarm Mode Hourly Time Signal screen while the Hourly Time Signal is on. • The Hourly Time Signal on indicator is on the display in all modes while the Hourly Time Signal is turned on. To configure the Hourly Time Signal to sound: Daily Daily on Saturday and Sunday Daily from Monday through Friday Select this setting: DAILY wEND wDAY DST indicator Timekeeping Mode time World Time World Time City code Dual Time Dual Time City code World Time World Time shows the current time in 48 cities (28 time zones) around the world. • All of the operations in this section are performed in the World Time Mode, which you enter by pressing C. To view the time for another city code In the World Time Mode, press D to scroll eastward through city codes or B to scroll westward. • For full information about city codes, see the “City Code Table”. • If the current time for a city is wrong, check your Timekeeping Mode time and Home City code settings and make necessary changes. • You can change your Home City code in the Timekeeping Mode. For more information, see “To set the time and date”. • You also can change your Dual Time City code in the Timekeeping Mode. For more information, see “To change the Dual Time City code”. To toggle a city code time between Standard Time and Daylight Saving Time 1. In the World Time Mode, use D and B to display the city code (time zone) whose Standard Time/Daylight Saving Time setting you want to change. 2. Hold down A for about one second to toggle between Daylight Saving Time (DST displayed) and Standard Time (DST not displayed). • The DST indicator is on the display whenever you display a city code for which Daylight Saving Time is turned on. • Note that the DST/Standard Time setting affects only the currently displayed city code. Other city codes are not affected. • You can use this operation to toggle the DST/Standard Time setting for the city code selected for your Dual Time City. Parallel to ground More than 40° Auto light switch indicator Illumination This watch has an EL (electro-luminescent) panel that causes the entire display to glow for easy reading in the dark. The watch’s auto light switch turns on illumination automatically when you angle the watch for reading towards your face. • The auto light switch must be turned on (indicated by the auto light switch indicator) for it to operate. • See “Illumination Precautions” for more important information. To illuminate the display manually In any mode, press L to turn on illumination for about one second. • The above operation turns on illumination regardless of the current auto light switch setting. About the Auto Light Switch While the auto light switch is enabled, illumination turns on whenever you position your wrist as described below in any mode. Moving the watch to a position that is parallel to the ground and then tilting it towards you more than 40 degrees causes illumination to turn on. • Wear the watch on the outside of your wrist. Warning! • Always make sure you are in a safe place whenever you are reading the watch using the auto light switch. Be especially careful when running or engaged in any other activity that can result in accident or injury. Also take care that sudden illumination by the auto light switch does not startle or distract others around you. • When you are wearing the watch, make sure that its auto light switch is turned off before riding a bicycle or operating a motorcycle or any other motor vehicle. S...