Once the alarm starts to sound, you can switch it off by pressing the Alarm ON/OFF switch (©). Setting the Alarm Time 1. Rotate the Alarm setting dial (©) in the direction indicated by the arrow marked on clock to move the Alarm hand (®) to the alarm time setting you want. 2. Raise the Alarm ON/OFF switch (©) to turn on the alarm. • Note that this clock does not distinguish between AM and PM times. If you set an alarm to wake up to in the morning, the alarm will sound again at the same time

Be sure to remove the sticker before using the clock. • Depending on the clock model, the configuration of your clock may differ somewhat from that shown in the illustration. •This product has a sweep second hand. • (TQ-551) Pressing SNOOZE/LIGHT illuminates the face of the clock for about three seconds for easy reading of the time in the dark. • (TQ-551) This product has a luminous resin face that accumulates light for easier reading. • (TQ-451) This product uses luminous paint for face marking

Be sure to remove the sticker before using the clock. • Depending on its model number, the appearance of your clock may differ somewhat from that shown in the illustration. GENERAL GUIDE © Light/Snooze button • Hold down to illuminate the display. • Pressing this button while the alarm is sounding stops the alarm. 2 Hour hand 3 Minute hand 4 Second hand © Alarm hand © Alarm ON/OFF switch 7 Time/Alarm setting knob • Press in and rotate to set the alarm. • Pull out and rotate to set the

–11 PARIS +1 HONOLULU –10 CAIRO +2 ANCHORAGE –9 MOSCOW +3 LOS ANGELES –8 DUBAI +4 DENVER –7 KARACHI +5 CHICAGO –6 DHAKA +6 NEW YORK –5 BANGKOK +7 CARACAS –4 HONG KONG +8 RIO DE JANEIRO –3 TOKYO +9 –2h –2 SYDNEY +10 AZORES –1 NOUMEA +11 LONDON 0 WELLINGTON +12 G.M.T(UTC) ••Based on data as of June 2008. ••UTC offsets and the use of summer time are subject to change in the country where they are used. ** In December 2007, the UTC offset for Caracas, Venezuela (CCS) was changed from –4 to –4.5. How

•If you make a mistake, you can clear the displayed time to 00M00S by pressing the STOP/RESET button (11111). •Starting a timer operation while the start time is 00M00S causes the timer to count time upwards, like a stopwatch. 2.Start the timer. Press the START button (33333) to start timer operation. •The displayed time counts down in 1-second steps. •To pause the timer operation, press the STOP/RESET button (11111). Press the START button (33333) to restart the timer operation. •While the time

Be sure to remove the sticker before using the clock. • Depending on the clock model, its configuration may differ somewhat from that shown in the illustration. Current time (Hour, minutes, seconds) Day of the week Current temperature Date (month - day) PM indicator Alarm time Alarm on indicator Snooze on indicator Alarm Off Snooze Alarm On Operation 2 GENERAL GUIDE 11111SNOOZE/LIGHT button • Press this button to illuminate the display for about • Pressing this button while the alarm is sounding

•The backlight of this clock employs an electro-luminescent (EL) light, which loses its illuminating power after very long term use. •The clock emits an audible sound whenever the display is illuminated. It does not indicate malfunction of the clock. Important! •Overuse of the light can shorten battery life. THERMOMETER FUNCTIONS A built-in sensor measures temperature and shows the measured value on the display. Temperature Measurements •The temperature display shows “Lo” for temperatures below

Be sure to remove the sticker before using the clock. •Depending on the clock model, the configuration of your clock may differ somewhat from that shown in the illustration. •Open the front cover and swing it to the back of the clock as shown in the illustration. Do not apply excess force to the cover when opening it. Alarm Off Alarm On Press to close. Front cover GENERAL GUIDE 11111Snooze/Light button •Press to turn on the backlight for three or four seconds. •Pressing this button while the ala

•The watch receives the calibration signal for four to 14 minutes everyday when the time in the Timekeeping Mode reaches each of the calibration times. Avoid performing any button operation within 14 minutes before or after any one of the calibration times. Doing so can interfere with correct calibration. •Remember that reception of the calibration signal depends on the current time in the Timekeeping Mode. To perform manual receive 1. Place the watch on a stable surface so its 12 o’clock side i