valutazioni - 1, GPA: 2
(
)
)
|
Facilità d'uso
Whether warming milk or baby food that is frozen, chilled or at room temperature, the iQ Bottle and Baby Food Warmer heats quickly, safely and evenly – with no hot spots.The versatile design holds all AVENT Bottles,VIA Cups, and baby food jars or tins. Please take 5 minutes to read through the ENTIRE INSTRUCTION LEAFLET including the warnings before using your iQ Bottle and Baby Food Warmer for the first time. PLEASE RETAIN THESE INSTRUCTIONS for future reference. Instructions are also available at Contents (A): a. Lid c. Warmer Base b. Lid Flap – Lifts to accommodate d. Lifter larger bottles (330ml/11oz) e. Interactive Electronic Display Interactive Electronic Display Guide Milk Mode (in ANY container) Power/Mode Selection Button – Hold button for 3 seconds to switch the warmer on/off. Press repeatedly to select milk or baby food and starting temperature. Baby Food Mode (in ANY container) Freezer Temperature Mode (Select when warming from frozen) 310 285 255 230 200 11 10 9 8 7 Volume Selection/Start Button – Press repeatedly to select the volume of milk or food. Once desired selections are made, hold button for 3 seconds to start warming cycle. Fridge Temperature Mode (Select when warming from chilled) 140 115 85 55 30 mlfl. oz 5 4 3 2 1 170 6 Volume Display – Displays the selected amount of liquid or food in both ml and oz Room Temperature Mode (Select when warming from room temperature) N.B. Whilst pressing the Power/Mode Selection or Volume Selection/Start Button, please hold the warmer base to prevent the warmer from slipping. Instructions for Use 1. Ensure that the warmer is placed on a firm level surface. Open the lid using the front catch, and fill the warmer with the appropriate amount of water (i) – See page 2 to determine water amount. Place the fully assembled bottle (including dome cap to prevent overheating) or storage container with lid in the warmer. For food jars and tins, please refer to manufacturer’s instructions. N.B. When warming a 330ml/11oz bottle, the lid flap will lift to accommodate the larger size. This will cause a small amount of steam to rise from the warmer. Close the lid ensuring that the front catch ‘clicks’ shut. 2. Plug in the warmer and switch on at the mains. 3. Switch on the warmer by holding the Power/Mode Selection Button for 3 seconds (ii). The warmer will beep, and the milk, room temperature and ml/oz symbols will illuminate. It is now ready for use. If the lid has not been closed correctly, the symbols will flash. When the unit is switched on, it automatically defaults to the milk/room temperature mode. If this is the mode you need, go to step 5. If not, proceed to step 4. 4. Choose milk or food, and select the starting temperature (iii) by pressing the Power/Mode Selection Button repeatedly until the desired symbols are illuminated. Please note that there are 6 possible options: milk from room temperature, milk from chilled, milk from frozen, food from room temperature, food from chilled, and food from frozen. (See Display Guide if needed.) N.B. Warming food jars or tins from frozen is NOT recommended. However, you can warm frozen food in VIA Cups within the warmer. N.B. Please ensure that the correct options are selected, as milk and food should not be heated for too long. 5. Select the amount of milk or food in the bottle or container by repeatedly pressing the Volume Selection/Start Button until the desired volume is illuminated (iv). If the desired amount is not shown on the display, please select the amount nearest to it. N.B. For volumes in grams, select the same amount in ml (e.g. for 85g select 85ml). N.B. The maximum volume that may be selected when warming food from frozen is 230ml/8oz. 6. Start the warming cycle (v): Once the desired settings are illuminated, hold down the Volume Selection/Start Button until the warmer beeps. The volume display will now flash ascending and descending lights up to the selected amount. The warming cycle is in progress – Do not open the lid. 7. Completion of warming cycle (vi):When the cycle is complete, the warmer will beep intermittently for 30 seconds and all the volume display lights will continuously flash for 3 minutes.You can remove the contents as soon as the warmer begins beeping. After 3 minutes, the warmer will beep 5 times and will turn off automatically. N.B. Philips AVENT recommends removing and using the contents immediately when the warming cycle is complete, even before the warmer automatically turns off. 8. Open the lid carefully to avoid any residual steam. Be careful when opening the lid as steam can escape and cause injury. Use a cloth when removing the container, as it may be hot (vii). Use the lifter to raise small bottles,VIA Cups, small food jars or tins. Pull the lifter just above the circular rim. Rest the lifter on the rim where it naturally sits. N.B. Do not remove the lifter from the warmer. 9. Before feeding your baby: Always check feed temperature before feeding (a) ...
Questo manuale è adatto anche per i modelli :Accessori per bambini - SCF260/37 (1.34 mb)
Energia elettrica - SCF260/23 (1.34 mb)
Energia elettrica - SCF260/11 (1.34 mb)