valutazioni - 0, GPA: 0
(
)
)
|
Facilità d'uso
24. Failure to follow de-scaling instructions may cause irreparable damage. 25. There are no serviceable parts inside the Electric Warmer. Do not attempt to open, service or repair the Electric Warmer yourself. For assistance call 1-800-54-AVENT (1-800-542-8368). 26. Before serving, unplug cord from wall outlet. Do not leave cord within child’s reach. 27. HOUSEHOLD USE ONLY SAVE THESE INSTRUCTIONS Instructions for use For AVENT Natural Feeding Bottles 1. Ensure basket is in place inside the warmer. 2. Place the assembled, filled bottle in the warmer with the dome cap removed. 3. For 4oz . 125ml bottles, fill the warmer with water to just above the level of milk in the bottle. 4. For larger bottles, fill the warmer to 15mm (1.2 inch) below the rim of the warmer. 5. Never let the water level rise above the neck of the bottle or spill over the edge of the warmer. 6. Plug the unit into an electrical outlet and click the switch to the ON position (I), the neon light will illuminate. Turn the dial to setting 3. 7. When the bottle has been in the warmer for the appropriate time (See guide), the light will flash on and off intermittently to indicate that the water surrounding the bottle is being kept at a constant temperature. 8. Remove immediately. Replace the dome cap. Shake the bottle and test the temperature of the liquid by sprinkling a few drops onto the back of your hand. Please ensure the lid of the container is tightly secured prior to shaking. 9. If the food is not ready, replace the bottle in the warmer. TAKE CARE NOT TO OVERHEAT. The water surrounding the bottle will be kept at a constant temperature but the temperature of the food will continue to increase. If the food is too hot, allow to cool. Always test temperature before feeding. 10. Once the bottle has reached the correct temperature and has been removed from the unit, switch off warmer (O) and unplug from the electrical outlet. Note: The basket can be removed when heating the AVENT Magic Cup and other makes of bottles. For the AVENT Tempo Natural Feeding Nurser 1. Ensure basket is in place inside the warmer. 2. Place the assembled, filled Tempo Nurser in the warmer with the dome cap removed. 3. Fill the warmer with water to the level of milk in the bottle liner. 4. Plug the unit into an electrical outlet and click the switch to the ON position (I). The neon light will illuminate. Turn the dial to setting 2 and continue as 7–10 above. Note: When using Tempo liners please ensure that you choose the correct settings as using a higher selection may cause liners to burst. EN EN Philips AVENT Electric Bottle and Baby Food Warmer For baby food jars 1. Ensure basket is in place inside the warmer. 2. Remove the lid and place jar in the warmer. 3. Fill the warmer with water to 15mm (1.2 inch) below the top of the jar. 4. Plug the unit into an electrical outlet and click the switch to the ON position (I) Turn the dial to setting 3. 5. The warmer will work in the same way as for feeding bottles. Take care when removing the jar as it, and the water surrounding it, will be hot. Stir the food and test it on a spoon yourself to ensure it is not too hot for your baby. TAKE CARE NOT TO OVERHEAT. 6. If the food is not ready, replace the jar in the warmer. The water surrounding the jar will be kept at a constant temperature but the temperature of the food will continue to increase. TAKE CARE NOT TO OVERHEAT. If the food is too hot, allow to cool. Always test temperature before feeding. 7. Once the food has reached the correct temperature and has been removed from the unit, switch off (O) and unplug from the electrical outlet. Note: For small jars you can place a screw ring from an AVENT Bottle below the jar before adding the water so that you can remove the container more easily. Care of your Electric Bottle and Baby Food Warmer Switch off (O), unplug and allow to cool before cleaning. Remove basket and wipe inside and outside with a damp cloth only. DO NOT USE AN ABRASIVE CLEANER. In order to reduce limescale build up, you can use pre-boiled or distilled water in your warmer. De-scaling You should de-scale your Electric Warmer every four weeks to ensure it continues to work 100 % effectively. Pour 2oz . 50ml of vinegar (white) mixed with 4oz . 100ml of cold water into the warmer (with basket in place). Allow to stand in the unit until any limescale has dissolved. Empty the unit and rinse thoroughly. Under no circumstances should anything other than vinegar or citric acid be used as it may cause irreparable damage. Key to product label FOLLOW OPERATING INSTRUCTIONS Philips AVENT is here to help Call TOLL-FREE at: 1.800.54.AVENT TEMPERATURE OF FOOD BEFORE WARMING 5 °C 20 °C (40 °F) (70 °F) 1 2 3 5 min 4 min 1 2 3 7 min 5 min 2 1 8.5 min 6 min 3 1 2 3 5.5 min 4.5 min 1 2 3 7.5 min 6 min 130 g 1 2 3 5 min 4.5 min 6 7 ES ES ES Calentador Electrico de Biberones y Alimentos para Bebes Calentador Electrico de Biberones y Alimentos para Bebes Por favo...