valutazioni - 3, GPA: 3.3
(
)
)
|
Facilità d'uso
However, proper use of this infant restraint reduces the risk of serious injury or death to your child. Failure to properly use this infant restraint increases the risk of serious injury or death in a sharp turn, sudden stop or crash. Your child’s safety depends on you installing and using this infant restraint correctly. Even if using this infant restraint seems easy to figure out on your own, it is very important to READ THE OWNER’S MANUAL. The manual is located in the back pocket of the infant restraint. You must also read your vehicle owner’s manual. Your child’s safety depends on: 1. Choosing a suitable location in your vehicle. Some seating positions, such as those equipped with air bags, may not be safe locations for this infant restraint. 2. Inserting the harness straps in the proper slots for your child. 3. Properly securing your child in the infant restraint. 4. Placing infant restraint/base in a rear-facing position. 4 5. Properly routing the vehicle seat belt or LATCH. 6. Properly reclining the infant restraint. 7. Properly securing the infant restraint in the vehicle using a seat belt designed to restrain an infant restraint or by using LATCH. Many seat belts are NOT safe to use with infant restraints, even though they can easily be threaded through the infant restraint! 5 2.0RegistrationInformation2.0RegistrationInformation Model Number: Manufactured in: Purchase Date: 2.1 Register Your Infant Restraint Please fill in the above information. The model number and the manufactured in (date) can be found on a label underneath your infant restraint. Fill out the prepaid registration postcard attached to the seat cover and mail it today. Child restraints could be recalled for safety reasons. You must register this restraint to be reached in a recall. Send your name, address and model number to: Graco Children’s Products Inc. 150 Oaklands Blvd. Exton, PA 19341 or call 1-800-345-4109 or 2.2 Recall Information • Call the U.S. Government’s Vehicle Safety Hotline at 1-888-327-4236 (TTY: 1-800-424-9153) or go to• Graco: 1-800-345-4109 or 6 2.3 If You Need Help In the U.S.A. or Canada, please contact our Customer Service Department with any questions you may have concerning parts, use, or maintenance. When you contact us, please have your product’s model and serial numbers ready so that we may help you efficiently. These numbers can be found on a sticker on the underside of your infant restraint. USA: 1-800-345-4109 or Canada: 1-800-667-8184 Montreal: 514-344-3533 7 3.0FeaturesandComponents3.0FeaturesandComponents Each model of the infant restraint comes with different harness options. To adjust your infant restraint properly, it is veryimportant to follow the instructions that are appropriate for themodel you have purchased. 3-Point Harness 5-Point Harness OR Vehicle belt/LATCH* path LATCH BaseAdjustableFootLATCHConnectorsAdjustmentBeltStorageBars United States Federal Motor Vehicle Safety Standards have defined a new system for installing car seats in vehicles. The system is called LATCH. * LATCH may be used IN PLACE of vehicle belt ONLY if vehicle is equippedwith LATCH anchor points. Please refer to vehicle owners manual forLATCH locations. 8 3.1 3-Point Harness Model HandleHarnessslotsVehiclebelthookHandleadjustmentbuttonHarnessclipHarnessbuckleHarnessstrapsFRONTVIEW:3-POINTHARNESS 9 Harness tightener Level indicator* REAR VIEW: 3-POINT HARNESS Canopy(on certain models) Release handle Harness anchor buckle Harness slot Owner’smanual Attachment latch pocket Locking clip** *Level The level indicator is attached to the side of Indicator the infant restraint, and indicates whether or not the infant restraint is properly reclined. The locking clip is stored on the bottom of **Locking the infant restraint. You will need to use it Clip with certain types of vehicle seat belts. 10 3.2 5-Point Harness Model FRONT VIEW: 5-POINT HARNESS Handle Harness slots Harness Handle clip adjustment button Harness buckle Vehicle Harness belt adjustment hook button Harness buckle tongues Harness adjustment strap 11 REAR VIEW: 5-POINT HARNESS *Level The level indicator is attached to the side of Indicator the infant restraint, and indicates whether or not the infant restraint is properly reclined. Canopy(oncertainmodels) HarnessslotReleasehandleAttachmentlatchLevelindicator* Owner’smanualpocketHarnessadjustmentstrapMetalWaiststrapjunctionanchorbuckleplateLockingclip** The locking clip is stored on the bottom of **Locking the infant restraint. You will need to use it Clip with certain types of vehicle seat belts. 12 3.3 Removing and Attaching Base To remove infant restraint, squeeze handle at back of seat and lift infant restraint from base as shown . To put infant restraint in base, push infant restraint down until it clicks into base. Pull upon infant restraint to be sure it is latched firmly into base. 3.4 Adjusting Handle 1. Press handle adjustment ...