valutazioni - , GPA:
(
)
)
Produttore : Barbie
File Size : 591.41 kb
File Nome : 72639A-0921.pdf
Lingua di insegnamento: 
Il documento viene caricato, si prega di attendere
 |
Il documento viene caricato, si prega di attendere
Facilità d'uso
Tools needed for assembly: Hammer, Phillips Screwdriver, Scrap Block of Wood. If you have any questions about this product, or are missing a part, please call us toll-free at 1-800-432-KIDS, rather than return this product to the store. Age: 2 - 5 years. Weight Limit: 55 lbs. WARNING WARNING • Adult supervision is required. • Never use near steps, sloped driveways, hills, roadways, alleys, swimming pools or other bodies of water. • Always wear shoes or sneakers. • Never allow more than one rider. Fisher-Price, Inc., a subsidiary of Mattel, Inc. East Aurora, New York 14052, U.S.A. ©1999 Mattel, Inc. All Rights Reserved. Printed in Mexico ® and ™ designate U.S. trademarks of Mattel, Inc. 72639A-0921 Parts #8 x 3" Screw – 1 #8 x 3/4" Screw – 4 (ALL SHOWN ACTUAL SIZE) Lock Washer – 2 Washer – 2 Cap Nut – 2 2 4 Pedal Hubs 2 Pedals 2 Lock Washers Pedal Axle 2 Fork Covers Front Wheel Fork Frame Handlebar Seat Straight Axle 2 Washers 2 Rear Wheels 2 Hubcaps 2 Cap Nuts BARBIE is a U. S. trademark of Mattel, Inc. Assembly • Please save all packaging material until assembly is complete to ensure that no parts are discarded. • If you are missing a part, please call us toll-free at 1-800-432-KIDS, rather than return this product to the store. • Please wipe each part with a clean, dry cloth before assembly. • Place a cap nut on a scrap block of wood. • Place one end of the straight axle into the cap nut. • Tap the end of the straight axle with a hammer. Make sure the cap nut is securely attached to the straight axle. Cap Nut Straight Axle 1 Scrap Block of Wood Please keep small parts, hardware and plastic bags out of children’s reach. Dispose of plastic bags properly. CAUTION • Slide a hubcap (peg side up) onto the straight axle. • Slide a rear wheel (indented side down) onto the straight axle. • Slide a washer onto the straight axle. Rear Wheel Indented Side Down Straight Axle Washer • Turn the frame upside down. • Insert the straight axle through the holes in the rear of the frame. Hole Washer Hole Frame Straight Axle Hubcap 3 2 Bottom View 3 Assembly Cap Nut Indented Side Up Assembled Rear Wheel Straight Axle Rear Wheel Washer Hubcap Frame 4 Bottom View Scrap Block of Wood • Turn the frame on its side with the exposed end of the straight axle up. • Place the assembled rear wheel on the scrap block of wood. • Slide a washer onto the straight axle. • Slide a rear wheel (indented side up) onto the end of the straight axle. • Slide a hubcap (peg side down) onto the straight axle. • Fit a cap nut on the end of the straight axle. • Tap the cap nut with a hammer. Gently pull the rear wheel up to be sure the cap nut is securely attached to the straight axle. • Set the frame assembly aside. • Fit two pedal hubs onto the pedal axle metal tabs. Make sure the metal tabs fit into the slot in each pedal axle cover. Pedal Hub Pedal Hub Pedal Axle Metal Tab Metal Tab Slot • While holding the pedal hubs on the pedal axle, insert the pedal axle into the hole in the center of the front wheel. Hole Pedal Axle Pedal Hubs Front Wheel Pedal Hubs 5 6 7 • Push the pedal hubs into the center of the front wheel until they are flush with the surface of the front wheel. 4 5 Pedal Hubs Pedal Hub Pedal Hub Pedal Axle • Turn the front wheel assembly over. • Insert a pedal hub onto the top of the pedal axle and into the hole in the center of the front wheel. • Insert the remaining pedal hub below the pedal axle and into the hole in the center of the front wheel. • Push the pedal hubs into the center of the front wheel until they are flush with the surface of the front wheel. • Insert a lock washer into the slot in the pedal. Make sure the raised tabs on the lock washer are facing the “closed” or outside end of the pedal. • Insert the other lock washer into the other pedal. Lock Washer Raised Tabs Slot Closed (Outside) End Assembly 8 9 10 • Place the front wheel assembly between the fork arms so that the pedal axle fits into the groove at the bottom of each fork arm. • Place a fork cover over the pedal axle on one fork arm. • Insert two #8 x 3/4" screws into the fork cover and tighten with a Phillips screwdriver. Do not over-tighten. • Repeat this procedure to attach the other fork cover to the other fork arm. Fork Arms Pedal Axle Groove Fork Cover #8 x 3/4" Screw – 4 SHOWN ACTUAL SIZE • Place a scrap block of wood under the front wheel assembly. • Fit a pedal on the pedal axle. • With the lock washer centered over the pedal axle end, tap the pedal with a hammer until it is secure. • Repeat this procedure to attach the other pedal to the other end of the pedal axle. Lock Washer (Inside) Front Wheel Assembly Front Wheel Assembly Scrap Block of Wood Pedal Axle Pedal 11 12 Pedal Hubs Pedal Hub Pedal Hub Pedal Axle • Turn the front wheel assembly over. • Insert a pedal hub onto the top of the pedal axle and into the hole in the center of the front wheel. • Insert the remaining pedal hub below the pedal axle and into the hole in the center of the front whe...