valutazioni - 3, GPA: 4.3
(
)
)
|
Facilità d'uso
A high probability of serious injury exists if this system is not installed, maintained, and operated properly. • If using a ladder during assembly, use extreme caution. • Two (2) capable adults are recommended for this operation. • Climate, corrosion, or misuse could result in system failure. • Minimum operational height is 7'6" (2.3 m) to the bottom of backboard. • This equipment is intended for home recreational use only and NOT excessive competitive play. • Read and understand the warning label enclosed with hardware. It is the responsibility of the customer to mount this label. It should be affixed to the pole, wall, or door near playing area, at a height between 4-6 feet (1.22-1.83M) above ground level and in a location visible to all players • The life of your basketball pole depends on many conditions. The climate, placement of the pole, the location of the pole, exposure to corrosives such as pesticides, herbicides or salts are all important factors. • If technical assistance is required contact Huffy Sports. • Serious injury could occur if teeth/face come in contact with backboard, net or rim. • Adult supervision is recommended when adjusting height. Most injuries are caused by misuse and/or not following instructions. Use caution when using this system. Owner must ensure that all players know and follow these rules for safe operation of the system. WARNING • DO NOT HANG on the rim or any part of the system including backboard, support braces or net. • During play, especially when performing dunk type activities, keep player's face away from the backboard, rim and net. Serious injury could occur if teeth/face come in contact with backboard, rim or net. • During play, do not wear jewelry (rings, watches, necklaces, etc.). Objects may entangle in net. • Check system before each use for loose hardware, excessive wear and signs corrosion and repair before use. • Never play on damaged equipment. • See instruction manual for proper installation and maintenance. Read and understand warnings listed below before using this product. Failure to follow these warnings may result in serious injury and/or property damage. ID#: 579800 05/05 In the U.S.: 1-888-713-5488 In the U.S.: 1-800-558-5234 In Canada: 1-800-284-8339 In the U.S.: 1-800-334-9111 In the U.S.: 1-800-558-5234 In Canada: 1-800-284-8339 ID# M788001 08/05 2 NOTICE TO ASSEMBLERS ALL Huffy Sports Basketball Systems, including those used for DISPLAYS, MUST be assembled and ballasted with sand or water according to the instructions. Failure to follow instructions could result in SERIOUS INJURY. It is NOT acceptable to devise a makeshift weight system. For more information on assembly, placement, proper use, and maintenance, visit The American Basketball Council website at IMPORTANT! Remove all contents from boxes. Be sure to check inside pole sections; hardware and additional parts are packed inside. WARRANTY CARD: Please remember to complete your productregistration form either on-line at: or mail-in the enclosed postcard. 3 08/05 ID# M788001 ID# M788001 08/05 4 SPRING SLAM JAM BRACKET SUPPORT STRUT Item Qty. Part No. Description 1 1 579800 Warning Label 2 1 900033 Slam Jam Bracket, Black 3 1 203796 Bolt, “Tee” 3/8 - NC x 5 Long 4 1 200318 Bracket Reinforcement, Slam Jam 5 1 203472 Spring, Black 6 1 203470 Washer, Flat 5/8 I.D. x 1-1/2 O.D. 7 1 203795 Nut, Special 3/8-NC 8 4 201611 Hex Flange Bolt 5/16-18 x 3 Long 4 203113 Hex Flange Bolt 5/16-18 x 2-1/2" Long 4 203104 Hex Flange Bolt 5/16-18 x 2" Long 4 205528 Hex Flange Bolt 5/16-18 x 1" Long 9 1 Net 10 4* 203309 Washer, 1 O.D. 11 4 203100 Hex Flange Nut, 5/16 x 18 12 1 Rim 13 1 202795 Logo, NBA 14 2 200520 Self Tapping Screw, #8 x 1/2 15 1 200503 Cover, Black 200504 Cover, Red * QUANTITY USED MAY VARY BY MOUNTING METHOD. PARTS LIST - See Hardware Identifier Get to know the basic parts of your basketball system..... RIM NET 5 08/05 ID# M788001 Item #8 (4) 201611 #11 (4) #5 (1) #3 (1) #2 (1) #10 (4) #4 (1) HARDWARE IDENTIFIER #7 (1) #8 (4) 203104 #8 (4) 203113 #8 (4) 205528 For Steel Framed Acrylics RIM TO BOARD BOLTS (This kit will only include 4 of one of the bolts listed below): These items may not be included with your set-up. #14 (2) #6 (1) #13 (1) ID# M788001 08/05 6 2 #2 1.Place Slam Jam bracket (2) onto rim bracket. HARDWARE USED IN THIS SECTION (not actual size) Lip of Slam Jam bracket will hook over rim bracket. NOTE: 12 HARDWARE USED IN THIS SECTION 12 3 #3 (not actual size) 2.Insert tee-bolt (3) into Slam-Jam bracket (2). Secure tee-bolt with reinforcement bracket (4). 2 #4 (1) 4 NOTE ORIENTATION: 7 08/05 ID# M788001 HARDWARE USED IN THIS SECTION 3 7 6 5 4 #7 #6 #5 (not actual size) Tighten nut (7) until flush with end of tee-bolt (3) as shown. 2. NOTE: Attach special nut (7), washer (6) and spring (5) to tee-bolt (3). ID# M788001 08/05 8 3.Connect rim using bolts (8), washers (10) and nuts (11). #11 #10 2 BOLTS (8) WILL VARY DEPENDING ON WHAT...