valutazioni - 5, GPA: 3.8 ( )

Produttore : Graco File Size : 3.76 mb File Nome : Lingua di insegnamento:

The locking clip is stored on the bottom of **Locking the infant restraint. You will need to use it Clip with certain types of vehicle seat belts. 8 2.2 5-Point Harness Model FRONT VIEW: 5-POINT HARNESS slots Harness buckle Harness adjustment button Harness Harness clip Harness Harness buckle tongues adjustment strap Handle Handle adjustment button Vehicle belt hook 9 REAR VIEW: 5-POINT HARNESS Release handle Level indicator* Harness slot Owner’s manual pocket Attachment latch Metal junction plate strap Canopy Harness adjustment Locking clip** Waist strap anchor buckle *Level The level indicator is attached to the side of Indicator the infant restraint, and indicates whether or not the infant restraint is properly reclined. The locking clip is stored on the bottom of **Locking the infant restraint. You will need to use it Clip with certain types of vehicle seat belts. 10 2.3 Removing and Attaching Base To remove infant restraint, squeeze handle at back of seat and lift infant restraint from base as shown ... To put infant restraint in base, push infant restraint down until it clicks into base. Pull up on infant restraint to be sure it is latched firmly into base. 2.4 Adjusting Handle 1. Press handle adjustment buttons on both sides of handle ... 2. Rotate handle until it clicks into any of three positions (for carrying, reclining, or sitting). BOTH handle adjustment buttons must pop out to lock handle in place ... Carrying 3. Push and pull on the handle to be sure it is locked firmly in position. Sitting .. .. .. Reclining 11 2.5 Attaching Canopy 1. Infant restraint comes with four (two on certain models) identical canopy support parts. Thread one canopy support completely through one sewn tunnel ... 2. Slide straight end of a second support into the straight end of the first support ... 3. On models with four canopy supports, repeat steps one and two for the other canopy tunnel. The canopy should appear as shown ... 4. Attach canopy in the areas between the infant restraint and the handle base ... ...... .. 12 2.6 Head Support (on certain models) Some infants may need extra support to keep their head and body in a comfortable position. Unsnap the sides and resnap them with the harness straps threaded through the slots in the cushion ... .... If your model does not include a head support, you may want to use a rolled towel or a blanket for support ... MAKE SURE THAT NOTHING INTERFERES WITH THE HARNESS. It must still be flat and snug against your child’s shoulders. 2.7 Cold Weather Boot (on certain models) Some models come with a cold weather boot. To use, wrap elastic around bottom of seat and place both elastic loops around vehicle belt hooks as shown . . .. 13 3.0 Important Information 3.1 Warnings for Use as Infant Restraint • DO NOT INSTALL OR USE THIS INFANT RESTRAINT AND BASE UNTIL YOU READ AND UNDERSTAND THE INSTRUCTIONS IN THIS MANUAL AND IN YOUR VEHICLE OWNER’S MANUAL. DO NOT let others install or use the infant restraint unless they understand how to use it. • FAILURE TO PROPERLY USE THIS INFANT RESTRAINT AND BASE INCREASES THE RISK OF SERIOUS INJURY OR DEATH IN A SUDDEN STOP OR CRASH. Your child can be injured in a vehicle even if you are not in a crash. Sudden braking and sharp turns can injure your child if the infant restraint is not properly installed or if your child is not properly secured in the infant restraint. • PLACE THIS INFANT RESTRAINT IN A REAR-FACING POSITION when using it in the vehicle. • NEVER PLACE THIS INFANT RESTRAINT IN A VEHICLE SEATING LOCATION THAT HAS AN AIR BAG. If an air bag inflates, it can hit the infant restraint with great force and cause serious injury or death to your child. Refer to your vehicle owner’s manual for information about air bags and infant restraint installation. 14 • SOME SPECIAL NEEDS CHILDREN, such as pre-term babies or those who have tested positive for positional apnea, may be at increased risk of suffering breathing or other difficulties in an infant restraint. If your child has special needs, we recommend that you have your physician or hospital staff evaluate your child and recommend the proper infant restraint or car bed before using this product. • According to accident statistics, CHILDREN ARE SAFER WHEN PROPERLY RESTRAINED IN REAR VEHICLE SEATING POSITIONS, RATHER THAN FRONT SEATING POSITIONS. For a vehicle with a front passenger air bag, refer to your vehicle owner’s manual as well as these instructions for infant restraint installation. • NEVER LEAVE YOUR CHILD UNATTENDED. • NEVER LEAVE AN INFANT RESTRAINT AND BASE UNSECURED IN YOUR VEHICLE. An unsecured infant restraint or base can be thrown around and may injure occupants in a sharp turn, sudden stop or crash. Remove it or make sure that it is securely belted in the vehicle. If not using LATCH, make sure LATCH connectors are properly stored on base. • REPLACE THE INFANT RESTRAINT AND BASE AFTER AN ACCIDENT OF ANY KIND. An accident can cause damage to the infant restraint that you can...

Scarica la tua

Per scaricare, digitare 2 cifre :