valutazioni - 3, GPA: 3.7 ( )

Produttore : Olympus File Size : 3.35 mb File Nome : Lingua di insegnamento:

3 Press the ERASE ( s) button. 4 Press the 9or 0 button to select [YES]. 1 File to be erased 5 Press the PLAY ( `) button. Erase All Files from a Folder (Fig. t) 1 Press the FOLDER/INDEX button to select the folder to be erased. 2 Press the ERASE ( s) button twice. 3 Press the 9or 0 button to select [YES]. 1 Folder to be erased 4 Press the PLAY ( `) button. Notes: • An erased file cannot be restored. • If operation is not executed for 8 seconds during the setting, it will return to the stop status. • Completion of erasing may take several seconds. Do not attempt to remove, replace battery or attempt any other functions on the voice recorder during this period because data may be corrupted. Menu Basic Operation of the Menu Mode (Fig. y) Using the menu function, you can change various settings according to your preference. 1 While the recorder is during stop mode, press and hold the DISP/MENU button for 1 second or longer. 2 Press the +or – button to select what you would like to set up. • The selected menu item flashes. 3 Press the 9or 0 button to change the setting. 4 Press the PLAY ( `) button to confirm the setting. 5 Press the STOP (4) button to close the menu. (Fig. u) 1Menu setting screen 2Move the selection one position up/increase the number 3Move the selection one position to the left 4Confirm the setting 5Move the selection one position down/decrease the number 6Move the selection one position to the right Notes: • The recorder will stop if you leave it idle for 3 minutes during a menu setup operation, when a selected item is not applied. 8 EN • If you press the STOP (4) button during a menu setup operation, the recorder will stop and apply the items that were set to that point. Recording Modes [HQ SP LP] The recording mode can be chosen from [ HQ] (high quality sound recording), [SP] (standard recording) and [LP] (long-term recording). In Menu mode selection...[HQ], [SP], [LP] VN-7500 Approx. HQ 81 h. Approx. 215 h. 50 min. SP Approx. 1208 h. 30 min. LP VN-6500 VN-5500 Approx. 40 h. Approx. 20 h. 30 min. 5 min. Approx. 107 h. 55 min. Approx. 53 h. 40 min. Approx. 604 h. Approx. 300 h. 15 min. 30 min. 1Current recording mode (Fig. i) • The recording time shown above is for one continuous file. The available recording time may be shorter than specified if several fi les are recorded. (Use the remaining time and recorded time only as references.) Microphone Sensitivity [h] Microphone sensitivity is adjustable to meet your recording needs. In Menu mode selection...[g], [i] giHigh-sensitivity mode that records sounds in all directions Low-sensitivity mode suited for dictation • To ensure successful recording, make a test recording to select appropriate microphone sensitivity before recording. • If you select [g], we recommend setting the recording mode to [HQ] to best take advantage of the higher sensitivity. • If you select [g], background noise may be high depending on the recording conditions. Using the Variable Control Voice Actuator [VCVA] When the microphone senses that sound has reached a preset volume, the built-in Variable Control Voice Actuator (VCVA) starts recording automatically, and stops it when the volume drops. Particularly helpful for extended recording, the VCVA not only conserves memory by turning off recording during silent periods, but also makes playback more efficient and convenient. In Menu mode selection...[On], [OFF] • During recording, press the + and – buttons to adjust the VCVA level in 15 levels. • The record/play indicator light is lit during recording. When the recorder is in Standby mode, the Record/Play indicator light flashes and [VCVA] flashes on the display. 1 VCVA indicator (Fig. ;) System Sounds [BEEP] (Fig. a) Informs a button operation or a wrong operation of the recorder by sound. System sounds may be turned off. In Menu mode selection...[On], [OFF] • If the alarm playback function has been set, the alarm will sound at the scheduled time even if the system sounds are disabled. Alarm Playback Function [k] You can use the alarm playback function to sound the alarm tone for 5 minutes at the scheduled time. Within this 5 minutes, pressing any button other than the HOLD switch starts the recorder to playback the preselected file. In Menu mode selection...[SET], [On], [OFF] After selecting [SET], press the PLAY ( `) button to set the time. • With the alarm playback function, only one file can be played back. Select a file for the function before setting the time. 1 Alarm indicator (Fig. s) • Regardless of the selected folder, once the alarm playback is set, it operates every day unless the setting is canceled. • To view the current setting, select [On], and press the PLAY (`) button. • The alarm tone stops automatically if no button is pressed within 5 minutes after the alarm starts. The file is not played back in this case. • If the recorder has no recorded fi le in the selected folder, the alarm playback function is not available. • Alarm playback occurs every day...

Scarica la tua

Per scaricare, digitare 2 cifre :