valutazioni - 4, GPA: 4
(
)
)
|
da questo dispositivo ha anche altre istruzioni :
Facilità d'uso
Please refer to Steps 2 to 3 in "Step 2: Setting the Clock"to set the date and time. 9“ Getting Started Replacing the batteries The battery indicator in the display window shows the battery condition. When "I ^“'flashes replace the batteries with new ones. When "i ¡"flashes the batteries are exhausted and the unit will stop operation. Battery life* (With continuous use) In the HQ mode Recording: Approx. 11 hr. Playback**: Approx. 7.5 hr. In the SP and LP modes Recording: Approx. 22 hr. Playback**: Approx. 11 hr. (hr.: hours) * Using Sony alkaline batteries LR03 (size AAA) "When playing back through the internal speaker with the medium volume level The battery life may shorten depending on the operation of the unit. II Notes • Do not use manganese batteries for this unit. • When you replace the batteries with new ones, the clock setting display appears. In this case, set the date and time again. The recorded messages and alarm setting, however, will remain. • When replacing the batteries, be sure to replace both batteries with new ones. • Do not charge dry batteries. • When you are not going to use the unit for a long time, remove the batteries to prevent damage from battery leakage and corrosion. • The unit is accessing data while "ACCESS" appears in the display window or the OPR indicator flashes in orange. While accessing, do not remove the batteries. Doing so may damage the data. Step 2: Setting the Clock Clock setting display appears when you insert batteries for the first time, or when you replace the batteries with new ones. In this case, proceed from step 2. 1 Display the clock setting display. © Press MENU/DISPLAY for more than 1 second until "MODE"appears in the display window. The unit enters the menu mode. © Press or^»H+todisplay"SET DATE", © Press ►■PLAY/STOP, The year digits will flash. 2 Set the date. © Press - or ►►!+ to select the digits of the year. © Press ►■PLAY/STOP, The month digits will flash. © Set the month and day in seguence, then press ►■PLAY/STOP. The hour digits will flash. Tip To set the date to Year 2007, display"07Y". 1 3 Set the time. © Press - or ►►!+ to select the digits of the hour. © Press ►■PLAY/STOP, The minute digits will flash. ® Set the minute. © Press ►■PLAY/STOP at the time signal. The display will return to "SET DATE". © Press BSTOP to exit from the menu mode. If the unit is left unused for more than 3 seconds in the stop mode, the display will show the current time. $ Tip This unit does not have a power on/off switch. The display is shown at all times. Basic Operations Recording Messages Display window Recording mode Current message number Counter display* Remaining memory indicator * The display selected with the MENU/DISPLAY button appears. You can record up to 99 messages in each of the four folders (A, B, C, and D). Since a newly recorded message is automatically added behind the last recorded message, you can start recording quickly without searching for the end of the last recording. HNote Before making a long recording, be sure to insert new batteries and check the battery indicator. n I U I _TO litó»! Built-in microphone OPR indicator (lights in red during recording.] •IIREC/PAUSE ■STOP 1 Select the recording mode. See "Changing the Recording Mode" on page 36. 2 Select the folder. See "Selecting the Folder"on page 17. 13» Basic Operations 3 Start recording. © Press •IIREC/PAUSE, You do not need to keep pressing •IIREC/PAUSE while recording. © Speaktothe built-in microphone. 4 Stop recording. Press «STOP. The unit stops at the beginning of the current recording. If you do not change the folder after you stop recording, the next time you record you will record in the same folder. Other operations To Do this pause Press •IIREC/PAUSE, recording* During recording pause, the OPR indicator flashes in red and "PAUSE"flashes in the display window. release Press •IIREC/PAUSE, pause and Recording resumes from that resume point. recording (To stop recording after pausing recording, press ■ STOP.) To Do this listen to Press BSTOP to stop the current recording, then press recording ►■PLAY/STOP. reviewthe Press ►■PLAY/STOP during current recording. recording instantly search Hold down - during backward recording or recording pause, during Recording mode will be recording released, and reviewing of the (Review) current recording starts. If you release the button, playback starts from that point. select the You can select the microphone microphone sensitivity using sensitivity the menu. See "Selecting the Microphone Sensitivity". H (high):To record at meeting or in a guiet and/or spacious place. L (low): To record for dictation or in a noisy place. * About one hour after you pause recording, recording pause is automatically released and the unit goes into the stop mode. Note on recording Noise may be recorded if an object, such as your finger, etc., accidentally rubs ...