Log:
valutazioni - 2, GPA: 4 ( )

Istruzioni per l'uso Sony, Modello ICD-UX81

Produttore : Sony
File Size : 4.94 mb
File Nome :
Lingua di insegnamento: en
Vai a scaricare



da questo dispositivo ha anche altre istruzioni :

Facilità d'uso


You cannot use VOL + or – to adjust the volume at this time. Note If you do not press ENT within one minute of entering the clock setting data, the clock setting mode is cancelled and the window will return to the display of the stop mode. To display the current date and time Press . (stop) to display the current date and time. Step 3: Setting the Language to Be Used in the Display Window ., . ENT/MENU You can select the language to be used for messages, menus, folder names, file names, etc. from 2 languages (European model)/7 languages (other models). Turning the IC Recorder On or Off When you are not using the IC recorder, you can prevent the battery from getting weak quickly by turning the power off. Turning the power off Slide the HOLD switch in the direction of the arrow in the stop mode. “HOLD” lights up and the key mark flashes and then “POWER OFF” is displayed. The IC recorder turns off within a few seconds. Turning the power on Slide the HOLD switch in the opposite direction from that of the arrow. The IC recorder is turned on, and an accessing animation is displayed. Tips When you are not going to use the IC recorder for a long time, we recommend to turn off the IC recorder. When 10 minutes have passed after you have turned on the IC recorder and leave it without doing anything, the display goes off automatically. (Press any button to show the display.) Recording/ Playback Messages 23GB Recording/Playing Back Messages Recording Messages . . ENT ., . . (headphone) jackBuilt-in microphonesOperation indicator/MENUHOLD . . 1 Select a folder. . Press /MENU to display the folder selection window. . Press . or . on the control button to select the folder in which you want to record messages ( FOLDER01-05), and then press ENT. 2 Start recording. . Press . (record/pause) in the stop mode. The operation indicator lights in red. (When “LED” is set to “OFF” in the menu (page 70), the operation indicator does not light.) You do not need to press and hold . (record/pause) while recording. The new message will be automatically recorded after the last recorded message. . Speak into the built-in microphones. 24GB 3 Press . (stop) to stop recording. The IC recorder stops at the beginning of the current recording. Tips Messages recorded using this IC recorder will be recorded as MP3 files. Before you start recording, we recommend you make a trial recording first. When you purchase the IC recorder, there are 5 folders already available, and you can record up to 99 messages in each folder. While recording you can lock all the functions of all the buttons so that you can prevent inadvertent operations by sliding the HOLD switch in the direction of the arrow. Notes You cannot record a message in a folder transferred from a computer. If you press . (record/pause) when you have selected a folder, the folder will be automatically changed to a folder in which a message can be recorded, and the message will be recorded as the last one in the folder. While the operation indicator is flashing or is lit in red or orange, do not remove the battery or connect or disconnect the USB AC adaptor. Doing so may damage the data. Noise may be recorded if an object, such as your finger, etc., accidentally rubs or scratches the IC recorder during recording. Before making a recording, be sure to check the remaining battery/charging indicator (page 15). To avoid replacing battery during a long recording session, use a USB AC adaptor (not supplied) (page 106). The maximum recording time varies if you record messages in mixed recording mode. To Do this pause recording* Press . (record/pause). During recording pause, the operation indicator flashes in red and ““ flashes in the display window. release pause and resume recording Press . (record/pause) again. Recording resumes from that point. (To stop recording after pausing recording, press . (stop).) review the current recording instantly Press ... Recording stops and playback starts from the beginning of the message just recorded. review during recording Press and hold . during recording or recording pause. Recording stops and you can search backwards while listening to fast playback sound. After you release ., playback starts from that point. * One hour after you pause recording, recording pause is automatically released and the IC recorder enters the stop mode. Monitoring the recording Connect the supplied stereo headphones to the . (headphone) jack and monitor the recording. You can adjust the monitoring volume by pressing VOL + or – on the control button, but the recording level is fixed. Selecting the recording mode ., . ENT/MENU You can select the recording mode in the menu when the IC recorder is stopped. The recording mode is set to “ST” when you purchase the IC recorder. 1 Press and hold /MENU to enter the menu mode. The menu mode window will be displayed. 2 Press . or . on the control button to select “REC MODE” and then press ENT. 3 Press . or . on the control button to select “ST,”...

Questo manuale è adatto anche per i modelli :
Dettatura - ICD-UX71 (4.94 mb)
Dettatura - ICD-UX71F (4.94 mb)
Dettatura - ICD-UX81F (4.94 mb)

Scrivi la tua opinione del dispositivo



Il messaggio
Il tuo nome :
Inserire le due cifre :
capcha





categorie