valutazioni - 4, GPA: 4.8
(
)
)
|
Facilità d'uso
The control automatically reads and stores the interior temperature every five minutes. The data can be cleared by pressing the “SET” and “ON/OFF” keys simultaneously while the value is displayed. Minimum Stored Temperature (tLO): Press and hold 3. the “SET” key to display the minimum temperature stored. The control automatically reads and stores the interior temperature every five minutes. The data can be cleared by pressing the “SET” and “ON/OFF” keys simultaneously while the value is displayed. Total Operating Time of the Condenser Since the Last 4. Cleaning (cnd): Press and hold the “SET” key to display the total operating hours of the compressor since the last cleaning. The control stores the total operating hours of the compressor to determine the volume of air that has moved across the condenser coils. This number is displayed in weeks. A reminder is displayed when a cleaning is recommended (see Alarm Codes). The recommended cleaning period is the equivalent of one year of air volume. The data can be cleared by pressing the “SET” and “ON/OFF” keys simultaneously while the value is displayed. 3 OPERATION Keypad Lockout Feature (Loc)• This feature is useful for prohibiting changes in the temperature set point or accidentally turning the unit off. Press and hold the “SET” key to display the current “Loc” setting. If “No” is displayed, Lockout is OFF and all keys are enabled. If “Yes” is displayed, Lockout is ON and the “ON/OFF”, “WARMER”, and “COLDER” keys are disabled. However, the key tones remain enabled. While holding the “SET” key, press the “WARMER” or “COLDER” key to select the desired state. Release the “SET” key to confirm the selection. NOTE: The Information/Lockout Key “SET” remains enabled regardless of the “Loc” setting. Warning Alarms Your wine cellar has been fitted with a MicroSentry™ refrigeration monitor. This monitor will let you know if your cellar is not functioning properly for optimum wine storage. Door Ajar Alarm If the door has been left open for over five minutes, the alarm will sound in one second intervals. The display panel will flash “Do” and the LED light will be a steady amber color. This will stop as soon as the door is closed. High and Low Temperature If your unit reaches an unacceptable temperature outside of your set point for more than one hour, the alarm will sound in one second intervals. The display panel will flash either “Hi” or “Lo” depending upon the condition and the LED light will be a steady amber color. “Hi” indicates that the temperature is 10 degrees F above the set point and “Lo” indicates that the temperature is 10 degrees F below the set point. These alarms will warn you that your wines have seen temperatures that may not be conducive for long term storage. The alarm will remain active until the condition is corrected. NOTE: During initial appliance start-up, the high temperature alarm may sound until the interior temperature reaches set point. Alarm Codes The control monitors and stores select unit parameters and will display error codes with sound each time a fault is detected. See reference below for a description of each error code. Error Code Detection Reference Error Code Description Do Door Open Hi High Temperature Lo Low Temperature E1 Sensor Fault CL Condenser Coil Cleaning Recommended Audible Alarm Mute Press any key to mute the audible portion of an alarm condition. Alarm sound is only muted, not disabled. If the condition(s) that caused the alarm(s) continue, visual indication will continue and alarm sound will periodically continue for 20 seconds every 60 minutes. 4 APPLIANCE FEATURES Insert Wine Bottles The five pull-out shelves each hold four bottles. See Figure 4 for typical wine bottle spacing. Tall bottles should not be loaded on the bottom rack because they may prevent the door from closing. Also, there is a fixed, wooden, bottle cradle in the bottom, step section of the cabinet. Three bottles may be stored there. Loading Tips and Suggestions Bottom rack(s) may be removed for storing “jug” wines. You may store magnums and other large bottles on any of the racks (except for the top rack) by removing the rack directly above them. Position white wines on the middle or lower racks and red wines on the upper racks (see Figure 5). The bottles on the top rack directly under the light will be exposed to a slightly higher temperature when the light is on. Position your wines accordingly and REMEMBER TO TURN OFF THE LIGHT WHEN IT IS NO LONGER NEEDED. Keep wines that you plan to use for everyday drinking and entertaining on the front half of the racks where labels are completely visible. Place wines for aging or longer term storing in the rear. Pull-out Racks The five pull-out wine racks may be pulled out approximately seven inches to facilitate adding or removing bottles. DO NOT lean on or press down heavily on the wine shelves. Doing so may damage the shelves and the wine bottles stored on them. Pull the wine racks out gently and carefully t...