valutazioni - 3, GPA: 4
(
)
)
|
Facilità d'uso
Depending on the ambient temperature and the setting, it can take the appliance up to 8 hours to reach the temperature required and for this temperature to then be shown as a constant temperature in the display. The temperature display will flash, if – a different temperature is being set, – the temperature in the wine cellar is too high or too low. Temperature display brightness The appliance is supplied with the brightness of the temperature display set as low as possible. However, if the door is opened, a setting changed or if the alarm is sounding, the temperature display will appear much brighter for approx. 1 minute. The level of brightness can be adjusted to be: – Brighter: by pressing the alarm off button and, whilst holding it in, pressing the upper button next to the temperature display. – Dimmer: by pressing the alarm off button, and whilst holding it in, pressing the lower button next to the temperature display. Humidity level It is very important to store wine in an atmosphere with a high humidity level (60-70 %) so that the corks remain moist on the outside. A refrigerator with its low humidity level is therefore not the best place to store wine. Low humidity causes corks to dry out from the outside, and so they do not seal the bottles as tightly. Wine should be stored lying down to keep the corks moist from the inside too! Air entering the bottle will inevitably spoil the wine. Ideal humidity levels can be maintained inside the appliance as long as the ambient room temperature is between 15°C and 35°C. Useful tip: Before serving, stand the wine upright for at least two hours, or the entire day if possible, to allow any sediment to settle at the bottom of the bottle. The correct temperature and humidity Air filtering with the active charcoal filter and dynamic cooling The active charcoal filter and the dynamic cooling system work together to ensure a good air flow is maintained throughout the cabinet and thus achieve optimum air quality. The dynamic cooling system draws fresh air with a humidity level of 60-70% from outside the appliance, in through the active charcoal filter and distributes it evenly around the interior. Filtering the incoming air through the active charcoal filter ensures that all the air entering the appliance is fresh and free from dust. Because the temperature is constant and evenly distributed throughout the unit you have the reassurance that all your wines are being kept in the same condition. Replace the active charcoal filter with a new one once a year (see "Cleaning and care"). These are available from your dealer. Storing wine bottles Wooden shelves Any vibration or movement of the bottle can affect the wine by interrupting the natural respiration process and so impair the taste. As far as possible, store bottles of the same type of wine beside each other on the same shelf. Removing a bottle of one type will then leave the other types undisturbed and will avoid the need to move different bottles around. You can adjust the height of the wooden shelves to suit your individual requirements. Descriptive labels Use the labels supplied to identify your wine quickly and easily. Insert the labels into the wooden shelf fronts from above. Additional labels can be purchased from your dealer or from the Miele Spare Parts Department. Maximum capacity The following data was obtained using standard Bordeaux wine bottles (0.75 l) and the number of shelves supplied with the appliance. – KWL 4612 S: up to 169 bottles – KWL 4812 S: up to 196 bottles Alarm Your appliance is fitted with a warning system which ensures that the temperature cannot rise or fall unnoticed and impair the wine. Temperature alarm The alarm will sound if the temperature in the appliance rises approx. 4°C above or falls approx. 4°C below the set temperature. The temperature display will flash at the same time. The alarm will sound and the temperature display will flash: – when you switch the appliance on for the first time. – when you switch the appliance on if the temperature in the appliance is very different from the temperature set. – when there has been a lengthy interruption to the power supply. Door alarm The alarm will sound if the door is left open for more than approx. 3 minutes. Switching on the alarm system The alarm system is always active. It does not have to be switched on manually. Switching the alarm off early Once the set temperature has been reached in the appliance, the alarm stops and the temperature display lights up constantly. However, if the noise disturbs you, you can switch the alarm off before this if you wish. ^ Press the alarm off button. The alarm will stop. The temperature display will continue to flash until the set temperature has been reached or the door has been shut again. The display then lights up constantly, and the alarm system is now fully active once more. Defrosting Condensate and frost can build up on the back wall of the appliance whilst it is in use. These are automa...
Questo manuale è adatto anche per i modelli :Dispenser - KWL 4612 S (387.28 kb)