valutazioni - 2, GPA: 3
(
)
)
|
Facilità d'uso
If needed, reset the controls to the desired setting. After loading the wine, you may notice the actual temperature rise. The adjustment of the actual temperature reaching the set temperature will be reflected in the display. This may take up to 12 hours to completely stabilize. 5 About the controls and settings. Locking the Controls Consumer Support Troubleshooting Tips OperatingInstructions Safety InstructionsInstallationInstructionsCare and Cleaning This feature allows you to lock the controls so the temperature settings cannot be changed. The interior light will still function. To unlock the controls, simply press and hold the RED WINE and INTERIOR LIGHT pads at the same time for 3 seconds. To lock the controls, press and hold the RED WINE and INTERIOR LIGHT pads at the same time for 3 seconds. The word LOC will appear in the display to indicate the lockout feature has been activated. The display will then go back to showing the actual temperature. Anytime a temperature pad is pressed while the lockout feature is activated, LOC will appear in the display. Key-Ejecting Lock The wine chiller can be locked using the spring-loaded lock located above the door. As a safety feature, the key for the spring- loaded lock is automatically ejected and will not remain in the lock in either the open or closed position. Wine Chiller Light Press the INTERIOR LIGHT pad to turn the interior light on or off. If you turn on the light and do not turn it off, it will automatically turn off after one hour. Automatic Humidity Control The inside of the wine chiller automatically maintains the necessary level of humidity to protect wine corks from drying out. As a result, frost may form on the inner surfaces. See Care and Cleaning for instructions on removing excessive frost buildup. 6 Care and cleaning. ge.com Cleaning the Outside IMPORTANT: Unplug the wine chiller before cleaning. Keep the outside clean. The cabinet can be washed with mild soap and water. Rinse thoroughly with clear water. Never use abrasive scouring powders. Use a glass cleaner or mild soap and water and a soft cloth to clean the glass door. Do not use any abrasive powders. Wipe the control panel with a damp cloth. Dry thoroughly. Do not use cleaning sprays, large amounts of soap and water, abrasives or sharp objects on the panel— they can damage it. Some paper towels can also scratch the control panel. Do not wipe the wine chiller with a soiled dishcloth or towel. These may leave a residue that can erode the paint. Do not use scouring pads, powdered cleaners, bleach or cleaners containing bleach because these products can scratch and weaken the paint finish. Stainless steel. Regularly clean and polish the stainless steel areas (on some models) with a commercially available stainless steel cleaner such as Stainless Steel Magic® to preserve and protect the fine finish. Stainless Steel Magic® is available through GE Parts and Accessories, 800.626.2002, or ge.com. Order part number WX10X15. Do not use appliance wax or polish on the stainless steel. Protect the paint finish. The finish on the outside of the wine chiller is a high-quality, baked-on paint finish. With proper care, it will stay new-looking and rust-free for years. Apply a coat of kitchen/appliance wax when the wine chiller is new, and then at least twice a year. Cleaning the Inside IMPORTANT: Unplug the wine chiller before cleaning. To clean the inner liner and racks, use a warm water and baking soda solution— about one tablespoon (15 ml) of baking soda to a quart (1 liter) of water. This both cleans and neutralizes odors. Rinse and wipe dry. Do not use detergents, scouring powders, spray cleaners or other harsh chemicals to clean the interior. The vinyl door gasket may be cleaned with mild soap and water or a baking soda solution. Rinse well. Defrosting Defrost whenever frost on the inside surfaces of the storage area becomes 1/8 . (3 mm) thick. Never use a heater of any kind, scraper or sharp instrument to remove frost as it may damage the wine chiller. To defrost, unplug the wine chiller. Remove the contents and wipe inside surfaces and racks with a clean towel. If frost does not come off easily, allow the frost to melt somewhat and wipe off. After defrosting, make sure inside surfaces are dry; then return the contents to the wine chiller and set the temperature control to the desired setting. Consumer SupportTroubleshooting Instructions InstallationInstructions Care and 7 Consumer Support Troubleshooting Tips Care and Cleaning OperatingInstructions InstallationInstructionsSafety Instructions Care and cleaning. In the Event of a Power Failure If the power fails, open the door as infrequently as possible to maintain the temperature. A gradual rise in temperature should not have any adverse effect on the wine. If it is extremely hot, you may want to unload the wine from the wine chiller and move the wine to a cooler location until power is restored. When power is restored, the controls automaticall...