valutazioni - 2, GPA: 4
(
)
)
|
Facilità d'uso
To remove a station preset: 1. Tune to the preset number you want to remove. 2. On the remote control, press and hold the 0 number button until the message PRESET: ## ERASED appears briefly on the media center display. Removal is then complete. To reassign a preset to a different station: 1. Tune to the station preferred. 2. On the remote control, press and hold the preset number button(s) you choose to ! re-assign to that station. Using the headphone jack For private listening, you can connect headphones to the jack, which is located on the right side of the media center (Figure 8). Figure 8 Location of the headphone jack on the media center Headphone jack Media center views Right side view Front view Right Front side ® Note: Connecting headphones mutes all main room speakers. Using the sleep timer You can set the sleep timer to turn off the LIFESTYLE® system automatically in 10 to 90 ! minutes, depending on the time you select. You can do this in the Settings menu for any source that is selected. Note: If you are unfamiliar with use of the Settings menu, refer to “Quick adjustments as you watch or listen” on page 43. In the Settings menu on the media ! center display or on the TV screen, ! move around and make changes! by using the selection buttons. English English SYSTEM OPERATION To set the timer: On both the media center display and the TV on-screen menu, the same actions apply: 1. Press the Settings button on the LIFESTYLE® remote to enter the source Settings menu. 2. Move down to the Sleep Timer symbol, the last feature in the menu (Figure 9). If you see a continuation arrow at the bottom of the menu, move to it to see the other attributes that are not currently shown. Figure 9 Sleep timer symbol in the source Settings menu 3. Move right into the options list and up to the delay time you want, from 10 to 90 minutes. Note: Pressing the up arrow when you reach the 90-minute option turns off the sleep timer. 4. Press Enter to confirm your selection. 5. Press Exit or Settings on the LIFESTYLE® remote control to leave the menu. When the time you set elapses, sleep timer turns off the system and the TV (if it is on*), and resets itself to zero. *For the TV to turn off automatically, the system must sense that it is on. This is contingent on your use of the supplied TV sensor. For information on installing and testing the TV sensor, refer to your Installation Guide. SYSTEM OPERATION 25 CONTROLLING EXTERNAL SOURCES English CONTROLLING EXTERNAL SOURCES Using your LIFESTYLE! remote with other components You can control most brands of external components – such as TVs, cable/satellite boxes, and VCR/DVRs – using your LIFESTYLE® remote control. After you make the proper menu selections for each component you want to control, the LIFESTYLE® remote serves as a universal remote for most of your component operations. Setting the remote to control each component Your LIFESTYLE® system includes an IR (infrared) emitter that sends out signals from the front of the music center to each component that your LIFESTYLE® remote is set to control. This allows you to turn on those sources (which are in the room with the media center) and make basic selections from them. The additional components may be connected either to the media center or to the TV. It may take more than one try Some manufacturers use a number of similar device codes. After selecting one code, your remote may turn your TV, cable or satellite box, or VCR on and off successfully. However, if you cannot change channels or initiate other features using the remote, you may want to continue testing device codes until you find one that provides greater control. After trying a few codes, if your component still does not respond, reposition the component slightly. Note: IR signals must reach each component for a reliable test of the IR code settings. A good way to succeed is by using the supplied IR emitter cable, positioning it in front of each component as you use the LIFESTYLE® remote to turn it on and off. If you have not yet installed the emitter, see “IR emitter cable as an option” in your Installation Guide. For TV control Note: For general guidelines on using the LIFESTYLE® System menu, refer to “Using System Menus” on page 32. Use the TV remote to turn on the TV. Be sure to select the video input on the TV for the media center. Then, using the LIFESTYLE® remote control: 1. Press TV to select the TV source. 2. Press System. The System menu will appear on the TV screen (Figure 10). 3. Move across the properties to Remote Control to preview these menu options. 4. Press the down arrow or Enter to move into that menu. Figure 10 Preview of Remote features in the System menu '()(*+#,-./#01#$/"234#01#&/"235#01#6-3(5#6&78#'%0#9(:;*(5#6&78#'%0#&/"235#6&78#'%0#6-3(5#16<#9(:;*(5#16<#&/"235#=#=<(>-+(#6-2+/-)# navigate select 26 English English CONTROLLING EXTERNAL SOURCES 5. Identify the TV brand: • From the list of options that appear, select TV Brand (Figure 11). • M...
Questo manuale è adatto anche per i modelli :Home theater - LIFESTYLE CCM-001770 (4.27 mb)