valutazioni - 4, GPA: 4
(
)
)
|
da questo dispositivo ha anche altre istruzioni :
Facilità d'uso
The stand is turned off when you turn off the TV. • When the Control for HDMI function is on, the System Power Off function is active, and the stand is turned off when you turn off the TV. An image does not appear on the TV. • Check whether HDMI IN and HDMI OUT are connected in reverse. When the stand is in standby mode, there is no image or sound on the TV. • When the stand is in standby mode, image and sound are output from the HDMI component selected the last time you turned off the stand. If you are enjoying other component, play the component and perform the One-Touch Play operation, or turn on the stand to select the HDMI component you want to enjoy. • Make sure “POWER SAVE” is set to “OFF” in the AMP menu if you connect components not compatible with the “BRAVIA” Sync to the stand (page 35). OTHER The remote does not function. • Point the remote at the remote sensor on the stand. • Remove any obstacles in the path between the remote and the stand. • Replace both batteries in the remote with new ones, if they are weak. • Make sure you select the correct input on the remote. The volume turns down when the output method changes from the TV speaker to the stand speaker. • The Volume Limit function is working. For details, refer to “Using the Volume Limit function” (page 34). 42GB If the stand still does not operate properly after performing the above measures, reset the stand as follows: If the stand still does not operate properly after performing the above measures, reset the stand as follows: 1 Press ?/1 to turn on the power. 2 Press ?/1 while pressing INPUT Specifications SELECTOR and VOLUME –. “COLD RESET” appears and the stand is reset. AMP menu, sound field etc., return to the default settings. Dimensions: mm (approx.) A 1,550 B 400 C 400 Inside dimension: mm (approx.) (Depth : 365 mm) D 131 E 1,367 Mass: kg 53 Additional Information continued 43GB FM tuner section Formats supported by this Tuning range 87.5 – 108.0 MHz stand (50 kHz step) FM tuner section Formats supported by this Tuning range 87.5 – 108.0 MHz stand (50 kHz step) as follows. Format Supported/Not supported Dolby Digital a DTS a Linear PCM-2ch* a Linear PCM-7.1ch a 48k* (Only on HDMI) Linear PCM-7.1ch . 96k Dolby Digital Plus . Dolby True HD . DTS-HD . * Linear PCM accepts sampling frequencies of no more than 48 kHz. Amplifier section Rated Output Power Stereo mode 55 W + 55 W, 6 ohms, 1 kHz, THD less than 1 % Reference Output Power Surround mode Front: 80 W/ch, 6 ohms, (per channel) 1 kHz, THD 10 % Center*: 100 W, 3 ohms, 1 kHz, THD 10 % Surround*: 80 W/ch, 6 ohms, 1 kHz, THD 10 % Subwoofer: 130 W, 3 ohms, 100 Hz ,THD 10 % * Depending on the sound field settings and the source, there may be no sound output. Inputs (Analog) TV Sensitivity: 450 mV Impedance: 30 kohms Inputs (Digital) TV, DVD Optical SAT/CATV Coaxial, optical Tuner section System PLL quartz-locked digital synthesizer Intermediate frequency 10.7 MHz AM tuner section Tuning range 531 kHz – 1,602 kHz (with the interval set at 9 kHz) Antenna (aerial) AM loop antenna (aerial) Intermediate frequency 450 kHz HDMI section Connector HDMI 19pin-standard connector Video inputs/outputs SAT/CATV, DVD, BD: 640 . 480p@60 Hz 720 . 480p@59.94/60 Hz 1280 . 720p@59.94/60 Hz 1920 . 1080i@59.94/60 Hz 1920 . 1080p@59.94/60 Hz 720 . 576p@50 Hz 1280 . 720p@50 Hz 1920 . 1080i@50 Hz 1920 . 1080p@50 Hz 1920 . 1080p@24 Hz Audio inputs SAT/CATV, DVD, BD: Linear PCM 7.1ch/ Dolby Digital/DTS Speakers Front speaker unit Speaker system Full range, Bass reflex Speaker unit 50 mm, cone type Center speaker unit Speaker system Full range, Acoustic suspension Speaker unit 35 mm, cone type . 3 Surround speaker unit Speaker system Full range, Bass reflex Speaker unit 50 mm, cone type Subwoofer unit Speaker system Subwoofer, Bass reflex Speaker unit 100 mm, cone type . 2 44GB General General Power consumption On: 125 W Active Standby (power saving function is on and the TV connected to the stand is in standby mode): 0.5 W or less Standby (Control for HDMI is off): 0.3 W or less Dimensions (approx.) 1,550 . 400 . 400 mm (w/h/d) Mass (approx.) 53 kg Supplied accessories Optical cable (1) Remote commander (RM-ANU032) (1) Size AA (R6) batteries (2) Cable ties (2) FM wire antenna (aerial) (1) AM loop antenna (aerial) (1) Operating Instructions (1) Design and specifications are subject to change without notice. • Standby power consumption 0.3 W. • Halogenated flame retardants are not used in the certain printed wiring boards. • Over 85 % power efficiency of amplifier block is achieved with the full digital amplifier, S-Master. Glossary Deep Color Video signals for which the color depth of signals passing through an HDMI jack have been raised. The number of colors that could be expressed by 1 pixel was 24 bits (16,777,216 colors) with the current HDMI jack. However, the number of colors which can be expressed by 1 pixel will be 36, etc., bits when the receiver corresponds to Deep Color. Since the gradation of the ...