valutazioni - 2, GPA: 4
(
)
)
|
Foto e specifiche Sony BDV-E800W |
da questo dispositivo ha anche altre istruzioni :
Home theater - BDV-E800W (517.1 kb)
Home theater - BDV-E800W (3.04 mb)
Facilità d'uso
Press PRESET +/– repeatedly to select the preset station you want to create an index name for. Press SYSTEM MENU. Press X/x repeatedly until “TUNER MENU” appears in the front panel display, then press or c. Press X/x repeatedly until “NAME IN” appears in the front panel display. Press or c. Create a name by using C/X/x/c. Press X/x to select a character, then press c to move the cursor to the next position. TUNED ST You can input letters, numbers, and other symbols for a radio station. If you make a mistake Press C/c repeatedly until the character to be changed flashes, then press X/x to select the desired character. To erase the character, press C/c repeatedly until the character to be erased flashes, then press CLEAR. Press . “COMPLETE” appears in the front panel display, and the station name is stored. Press SYSTEM MENU. The system menu turns off. Using the Radio Data System (RDS) (European models only) What is the Radio Data System? The Radio Data System (RDS) is a broadcasting service that allows radio stations to send additional information along with the regular program signal. This tuner offers convenient RDS features, such as station name display. The station name appears on the TV screen as well. RDS is available only for FM stations.* * Not all FM stations provide RDS service, nor do they provide the same type of services. If you are not familiar with the RDS system, check with your local radio stations for details on RDS services in your area. Receiving RDS broadcasts Simply select a station from the FM band. When you tune in a station that provides RDS services, the station name* appears in the front panel display. * If an RDS broadcast is not received, the station name may not appear in the front panel display. Note • RDS may not work properly if the station you are tuned to is not transmitting the RDS signal properly, or if the signal strength is weak. Tuner 59GB External Audio Device External Audio Device Using the DIGITAL MEDIA PORT Adapter The DIGITAL MEDIA PORT (DMPORT) adapter is for enjoying sound from a portable audio source or computer. By connecting a DIGITAL MEDIA PORT adapter, you can enjoy sound from the connected component on the system. Available DIGITAL MEDIA PORT adapters vary in each area. For details on connecting the DIGITAL MEDIA PORT adapter, see “Connecting the other components” (page 25). Note • Do not connect an adapter other than the DIGITAL MEDIA PORT adapter. • Do not connect or disconnect the DIGITAL MEDIA PORT adapter to/from the unit while the system is turned on. • Depending on the type of DIGITAL MEDIA PORT adapter, images are also output. In this case, the system outputs a composite video signal only, regardless of the type of video signal. • When you use the system and a Bluetooth Wireless Audio Adapter (such as TDM-BT1, not supplied) at the same time, transmission distance between the Bluetooth transmitter and Bluetooth Wireless Audio Adapter may be reduced. In this case, place the Bluetooth transmitter as far as possible from the system, or move the Bluetooth Wireless Audio Adapter closer to the Bluetooth transmitter. • When you use the system and the Wireless Network Audio Adapter (such as TDM-NC1, not supplied) at the same time, place the Wireless Network Audio Adapter as far as possible from the system. 1 Press FUNCTION repeatedly until “DMPORT” appears in the front panel display. 2 Start playback of the connected component. The sound and images from the connected component are played on the system or connected TV. For operation details, refer to the operating instructions of the DIGITAL MEDIA PORT adapter. Tip • Depending on the type of DIGITAL MEDIA PORT adapter, you may be able to operate a connected component using either the buttons on the remote or the unit. The following illustration shows an example of buttons that can be used in this case. FUNCTION 321 654 987 0 ./> N x X To enhance compressed sound You can enhance compressed sound such as an MP3 audio file. This effect is activated automatically when you set the decoding mode to “A.F.D. STD” (page 37) while the “DMPORT” function is selected. To cancel the effect, select other than “A.F.D. STD.” 60GB Using an S-AIR Product The unit is compatible with the S-AIR function (page 111), which allows sound transmission between S-AIR products. About S-AIR products There are two types of S-AIR product. • S-AIR main unit (this unit): This is for transmitting sound. You can use up to three S-AIR main units. (The number of usable S-AIR main units depends on the use environment.) • S-AIR sub unit: This is for receiving sound. – Surround amplifier: You can enjoy surround speaker sound wirelessly. Establishing sound transmission between the unit and S-AIR sub unit (ID setting) For the surround amplifier For the S-AIR receiver Simply by matching the ID of the unit and the S-AIR sub unit, you can establish sound transmission. To set the ID of the unit 1 Set the S-AIR ID switch of the unit to the desired ID. Exte...