valutazioni - 3, GPA: 4.3
(
)
)
|
da questo dispositivo ha anche altre istruzioni :
Home theater - HT-DDWG700 (1.56 mb)
Home theater - HT-DDWG700 (1.21 mb)
Home theater - HT-DDWG700 (2.29 mb)
Facilità d'uso
This is not a malfunction and will depend on the connected component. • If the sound from the component connected to the VIDEO IN/PORTABLE AUDIO IN/AUTO CAL MIC jack is very soft, you may increase the volume level. However, before you select other component, be sure to reduce the volume level to avoid damaging your speaker. Tip You are recommended to use “PORTABLE” sound field if the source is MP3 or other compressed source. 17GB Getting Started Connecting components with HDMI jacks HDMI is the abbreviated name for HighDefinition Multimedia Interface. It is an interface which transmits video and audio signals in digital format. Before connecting the cords, be sure to disconnect the AC power cord (mains lead). TV, etc. Audit signa )/video ls ■там HDMI [iaJ .£ SATIN_ DVD/BD IN OUT ш ш ш DVD player/DVD recorder/ Blu-ray disc player Audio signals ЕЩ Audio/video signals m o о SUB WOOFER SURROUND RL CENTER FRONT RL ЫГЫГЫ F4-F4-F^L © HDMI cable (not supplied) We recommend that you use a Sony HDMI cable. © Coaxial digital cord (supplied) © Optical digital cord (not supplied) 18GB If you connect a DVD player or Blu-ray disc player • Be sure to change the factory setting of the DVD/BD input button on the remote so that you can use the button to control your DVD player or Blu-ray disc player. For details, see “Changing button assignments” (page 55). •You can also rename the DVD/BD input so that it can be displayed on the receiver’s display. For details, see “Naming inputs” (page 53). Notes on digital audio connection • When connecting optical digital cords, insert the plugs straight in until they click into place. • Do not bend or tie optical digital cords. • All the digital audio jacks are compatible with 32 kHz, 44.1 kHz, 48 kHz, and 96 kHz sampling frequencies. Notes on HDMI connections • The sound is output from the TV speaker only when a playback component and this receiver, as well as this receiver and the TV are connected via an HDMI jack. To output the sound from the supplied speakers and to take advantage of the multi channel surround sound, be sure to - connect the digital audio jacks on the playback component to the receiver. - turn off the TV’s volume or activate the TV’s muting function. • This receiver may not be able to transfer video or audio signals with certain types of components. • The multi/stereo area audio signals of a Super Audio CD are not output. • Be sure to turn on the receiver when the video and audio of a playback component are being output to a TV via the receiver. Unless the power is turned on, neither video nor audio signals will be transmitted. • Check the setup of the connected component if the image is poor or the sound does not come out of a component connected via the HDMI cable. • Video signals input to the HDMI IN jack can only be output from the HDMI OUT jack. • Refer to the operating instructions of each component connected for details. 19GB Getting Started Before connecting the cords, be sure to disconnect the AC power cord (mains lead). The following illustration shows how to connect video components such as DVD player, Blu-ray disc player, satellite tuner, etc. Connecting video components Satellite tuner/ Set-top box В IDIGITAL JL n_ О о OPTICAL = ANTENNA зГИ □ II □am SAT IN DVD/BD IN OUT Е=Э E3 SUB SURROUND WOOFER R L CENTER FRONT R L -000 DVD player/ DVD recorder/ Blu-ray disc player SPEAKERS © Optical digital cord (not supplied) © Audio cord (not supplied) © Coaxial digital cord (supplied) 20GB If you connect a DVD player or Blu-ray disc player • Be sure to change the factory setting of the DVD/BD input button on the remote so that you can use the button to control your DVD player or Blu-ray disc player. For details, see “Changing button assignments” (page 55). • You can also rename the DVD/BD input so that it can be displayed on the receiver’s display. For details, see “Naming inputs” (page 53). Notes • To input multi channel digital audio from the DVD player, DVD recorder or Blu-ray disc player, set the digital audio output setting on the DVD player, DVD recorder or Blu-ray disc player. Refer to the operating instructions supplied with the DVD player, DVD recorder or Blu-ray disc player. • To output sound from the front speakers and the subwoofer only when you select DVD/BD input, be sure to: - connect your DVD player, DVD recorder or Blu-ray disc player to the DIGITAL COAXIAL DVD/BD IN jack on the receiver. - press 2CH. • When connecting optical digital cords, insert the plugs straight in until they click into place. • Do not bend or tie optical digital cords. • Be sure to connect the video output of the DVD player/DVD recorder/Blu-ray disc player and satellite tuner/set-top box to the TV, so that the image is displayed on the TV. Refer to the operating instructions of each component connected for details. • You cannot do recording on th...