valutazioni - 2, GPA: 4.5
(
)
)
|
Foto e specifiche Sony RHT-G15 |
da questo dispositivo ha anche altre istruzioni :
Home theater - RHT-G15 (663.41 kb)
Home theater - RHT-G15 (2.88 mb)
Home theater - RHT-G15 (3.04 mb)
Home theater - RHT-G15 (4.58 mb)
Facilità d'uso
To detach the DIGITAL MEDIA PORT adapter, press and hold A and then pull out the connector. A Connecting the AC power cord (mains lead) Before connecting the AC power cord (mains lead) of the stand to a wall outlet (mains), connect all the other components and TV to the stand. Note • Connect the stand to an easily accessible AC outlet (mains). Should you notice an abnormality in the stand, disconnect the main plug from the AC outlet (mains) immediately. Setting up the sound output of the connected component Depending on the audio output settings of the connected component, the sound may output in 2 channel format only. In this case, set the connected component to output sound in multi-channel format (DTS, Dolby Digital, multi-channel LPCM). For details on audio output settings, refer to the operating instructions supplied with the connected component. 14GB Playback Options Playback Options For more information, see the pages indicated in parentheses. Front panel display Front panel buttons and indicator Front panel buttons and indicator A INPUT SELECTOR C POWER/ACTIVE STANDBY Press to select the input source to play back. Lights as follows: Each time you press the button, the input Green: The stand is turned on. source changes cyclically as follows: Amber: Only HDMI parts of the stand are TV t BD t DVD t SAT/CATV t on (The Control for HDMI function is AUDIO t FM t DMPORT t TV... working.) B ?/1 (on/standby) Off: The stand is turned off. Note • The amber light turns off 30 seconds after you turn off the TV. However, if you set “PASS THRU” to “ON” in the AMP menu, the indicator stays amber even if you turn off the TV. D (remote sensor) E VOL +/– Playback Options continued 15GB Front panel display About the indications in the front panel display Front panel display About the indications in the front panel display A Audio format indicators Light up according to the audio format that is being input to the stand. D : Dolby Digital PLII : Dolby Pro Logic II LPCM : Linear PCM DTS B NIGHT (30) Lights up in NIGHT MODE. C SLEEP (31) Flashes when the sleep timer is active. D HDMI (10, 12) Lights up when HDMI components are being used or when an ARC signal is being input to the stand while TV is selected as the input source. E COAX/OPT Light up according to the cable which you are using. F TUNED Lights up when tuned to a station. G ST Lights up when a stereo program is received. H MUTING Lights up when the sound is turned off. I Message display area Displays volume, selected input source, audio input signal, etc. 16GB Remote control VOLUME MUTING TUNING- PRESET-NIGHT DISPLAY CENTER SUBWOOFER INPUT SELECTOR AMP MENU LEVEL DIMMER TUNING+ PRESET+ RETURN MENU SOUND FIELD Remote control VOLUME MUTING TUNING- PRESET-NIGHT DISPLAY CENTER SUBWOOFER INPUT SELECTOR AMP MENU LEVEL DIMMER TUNING+ PRESET+ RETURN MENU SOUND FIELD Buttons for the operation of this stand A ?/1 (on/standby) B LEVEL Press to adjust the level of the center speaker and subwoofer. This setting is applied to all sound fields. C AMP MENU (page 28) D C, X, x, c or Press C, X, x or c to select the settings. Then press to enter the selection. E MENU Press to preset a radio station or name the preset station (pages 20, 21). F DIMMER Press to select the brightness of the front panel display. It can be set to one of two levels. G TUNING +/– (page 20) I SOUND FIELD +/– (page 23) J VOLUME +/– K MUTING L NIGHT Press to reproduce dialog clearly even at a low volume level. This function is useful for enjoying sound at night. M PRESET +/– (page 20) N O RETURN O DISPLAY Press to switch the information in the front panel display or to see the input signal format (5.1ch, etc.) while a digital audio signal is being input to the stand. P INPUT SELECTOR +/– Press to select an input source, such as the tuner, or other connected component. Each time you press the button, the input source changes cyclically as follows: TV y BD y DVD y SAT/CATV y AUDIO y FM y DMPORT y TV … Buttons for the operation of a connected component through DMPORT connection D C, X, x, c or E MENU G m/M Press to fast reverse or to fast forward the disc when pressed during playback. H N (playback)/X (pause)/x (stop) M ./> Press to skip chapters. N O RETURN O DISPLAY Press to select the setting of the front panel display. Playback Options 17GB Enjoying TV Enjoying other components Enjoying TV Enjoying other components INPUT -TUNING+ -NIGHT DIMMER PRESET+ SUBWOOFER INPUT SELECTOR AMP MENULEVEL MENUSOUND FIELD SELECTOR +/– VOLUME +/– 1 Turn on the TV and choose a program. Refer to the operating instructions of your TV for details. 2 Turn the stand on. 3 Press INPUT SELECTOR +/– repeatedly until “TV” appears in the front panel display. 4 Adjust the volume by pressing VOLUME +/–. Tip • The sound may be output from the TV’s speaker. In this case, turn the volume of the TV’s speaker down to minimum. If you are using “BRAVIA” Sync (System Audio Control) You do not need to perform steps 2 and 3 above. When you turn o...