valutazioni - 4, GPA: 4
(
)
)
|
Foto e specifiche Sony DAV-S800 |
da questo dispositivo ha anche altre istruzioni :
Home theater - DAV-S800 (866.34 kb)
Home theater - DAV-S800 (2.21 mb)
Home theater - DAV-S800 (4.49 mb)
Facilità d'uso
Then release TV [/1. Code numbers of controllable TVs If more than one code number is listed, try entering them one at a time until you find the one that works with your TV. TV Manufacturer Code number DAEWOO 002, 004, 005, 006, 007, 015 FISHER 008 GOLDSTAR 002, 003, 011, 012, 015, 034 DRUNDIG 017, 034 HITACHI 002, 013, 014, 015 ITT/NOKIA 021, 022 JVC 016 MAGNAVOX 002, 003, 018 MITSUBISHI/MGA 002, 003, 019 NEC 002, 003, 020 PANASONIC 009, 024 PHILIPS 015, 018 PIONEER 009, 025, 026, 040 RCA/PROSCAN 002, 010, 027, 028, 029 SAMSUNG 002, 003, 015, 031, 032, 033, 034 SANYO 008, 044, 045, 046 SHARP 035 SONY 001 TELEFUNKEN 023, 036, 037, 038 THOMSON 030, 037, 039 TOSHIBA 035, 040, 041 ZENITH 042, 043 CATV Manufacturer Code number SONY 101 JERROLD/GI 102, 103, 104, 105, 106, 107, 108, 109, 119, 131 SCIENTIFIC ATLANTA 110, 111, 112 PIONEER 115, 116 HAMLIN/REGAL 123, 124, 125, 126, 127 OAK 128, 129, 130 ZENITH 113, 114 TOCOM 117, 118, 131 PANASONIC 120, 121, 122 Controlling the TV You can control your TV using the buttons below. By pressing You can TV [/1 Turn the TV on or off. TV/VIDEO Switch the TV’s input source between the TV and other input sources. Switching between TV and DVD Using the CONTROL DVD/TV switch, you can switch the remote signal between control of the TV and control of the DVD unit. When you watch the DVD, ensure that you have the CONTROL DVD/TV switch set to DVD. The table below shows the buttons that are affected by the CONTROL DVD/TV switch. Button DVD TV 1~9,** Standard number Regardless of >10, button function the number 10/0 for DVD. button pressed, the channel advances in numerical order. ENTER Standard enter Skips to channel function for 12. DVD. . Standard CH – preceding title, chapter skip function for DVD. > Standard forward CH + title, chapter skip for DVD. 3 VOL + VOL + # VOL – VOL – Note Depending on the TV, you may not be able to control your TV or to use some of the buttons above. * Use the number buttons only to enter the code number of controllable TVs. ** For double digit number, press >10, then the number. (For example, press >10, then 2 and 5 for entering 25.) Watching the Video or other Unit You can use VCRs or other units connected to the VIDEO 1 or VIDEO 2 jacks. Refer to the operation manual supplied with the unit for farther information on the operation. 1 2 3 4 5 6 7 >10 10/0 8 9 FUNCTION Press FUNCTION repeatedly until VIDEO 1 or VIDEO 2 that you connected the unit to appears on the front panel display. Each time you press FUNCTION, the mode of the system changes in the following sequence. DVD t VIDEO 1 t VIDEO 2 t TUNER t DVD... Other Operations Listening to the Radio Preset radio stations in the system’s memory first (see “Presetting Radio Stations” on page 29). 1 2 3 4 5 6 7 8 9 >10 10/0 1 STEREO/ MONO FUNCTION DISPLAY VOL +/– TUNING +/– PRESET +/– 1 Press FUNCTION repeatedly until TUNER appears on the front panel display. The last received station is tuned in. m TUNED ST FM MHz 2 Press PRESET + or PRESET – repeatedly to select the preset station you want. Each time you press the button, the system tunes in one preset station. 3 Adjust the volume by pressing VOL +/–. To listen to non-preset radio stations Use manual or automatic tuning in Step 2. For manual tuning, press m or M (TUNING + or –) on the remote repeatedly. For automatic tuning, press and hold m or M (TUNING + or –) on the remote. zIf an FM programme is noisy Press STEREO/MONO on the remote so that “MONO” appears on the front panel display. There will be no stereo effect, but the reception will improve. Press the button again to restore the stereo effect. zTo improve reception Reorient the supplied antennas. To check the frequency or sound field Press DISPLAY repeatedly. Each time you press DISPLAY, the front panel display changes as follows: index name of the station t frequency t sound field t index name of the station To turn off the radio Press 1. Using the Radio Data System (RDS) (Only for the European models) What is the Radio Data System? Radio Data System (RDS) is a broadcasting service that allows radio stations to send additional information along with the regular programme signal. This tuner offers convenient RDS features such as station name display. RDS is available only for FM stations.* Note RDS may not work properly if the station you are tuned to is not transmitting the RDS signal properly, or if the signal strength is weak. * Not all FM stations provide RDS service, nor do they provide the same type of services. If you are not familiar with the RDS system, check with your local radio stations for details on RDS services in your area. Receiving RDS broadcasts Simply select a station from the FM band. When you tune in a station that provides RDS services, the station name appears in the display. To check the RDS information Each time you press DISPLAY, the display changes as follows: t Station name* r Frequency r SOUND FIELD * If the RDS broadcast is not received, the station name may not a...