valutazioni - , GPA: ( )

Istruzioni per l'uso Sony, Modello HT-SL500

Produttore : Sony
File Size : 1.11 mb
File Nome : 4254753121.pdf

Lingua di insegnamento:

Il documento viene caricato, si prega di attendere

Scarica la tua primo

Il documento viene caricato, si prega di attendere

Scarica la tua primo

da questo dispositivo ha anche altre istruzioni :

Home theater - HT-SL500 (1.27 mb)

Home theater - HT-SL500 (2.14 mb)

Home theater - HT-SL500 (3.53 mb)

Home theater - HT-SL500 (4.42 mb)

Tutte

Home theater - HT-SL500 (117.95 kb)

• No stations have been preset or the preset stations have been cleared (when tuning by scanning preset stations). Preset the stations (page 20). RDS does not work.* • Make sure that you are tuned to an FM RDS station. • Select a stronger FM station. The RDS information that you want does not appear.* • Contact the radio station and find out whether they actually provide the service in question. If so, the service may be temporarily out of order. There is no picture or an unclear picture appears on the TV screen or monitor. • Select the appropriate input on the receiver. • Set your TV to the appropriate input mode. • Move your TV away from the audio components. * Models of area code CEL, CEK only. Remote control The remote does not function. • The AUX button on the remote is not available for receiver operation. • The DISPLAY button on the remote is available for TUNER input only.* • Point the remote at the remote sensor on the receiver. • Remove any obstacles in the path between the remote and the receiver. • Replace all the batteries in the remote with new ones, if they are weak. • Make sure you select the correct input on the remote. • To activate the buttons with orange printing, press ALT first before pressing the buttons. • Before you use the V/v/B/b button for receiver operation, press MAIN MENU. To operate other components, press TOP MENU/GUIDE or AV MENU after pressing the function button. * Models of area code CEL, CEK only. Error message If there is a malfunction, the display shows a message. PROTECT Irregular current is output from the speakers. The receiver will automatically turn off after a few seconds. Check the speaker connection and turn on the power again. If this problem persists, consult your nearest Sony dealer. Additional Information continued 37GB If you are unable to remedy the problem using the troubleshooting guide Clearing the receiver’s memory may remedy the problem (page 14). However, note that all memorized settings will be reset to their factory settings and you will have to readjust all settings on the receiver. If the problem persist Consult your nearest Sony dealer. Reference sections for clearing the receiver’s memory To clear See All memorized settings page 14 Customized sound fields page 28 Specifications Amplifier section Power Output Models of area code CEL, CEK (6 ohms 1 kHz, THD 0.7%)1) FRONT2): 40 W/ch CENTER2): 40 W SURR2): 40 W/ch (6 ohms 1 kHz, THD 10%)1) FRONT2): 60 W/ch CENTER2): 60 W SURR2): 60 W/ch Models of area code AU (6 ohms 120 Hz–20 kHz, THD 0.09%)1) FRONT2): 35 W/ch CENTER2): 35 W SURR2): 35 W/ch (6 ohms 1 kHz, THD 0.7%)1) FRONT2): 40 W/ch CENTER2): 40 W SURR2): 40 W/ch (6 ohms 1 kHz, THD 10%)1) FRONT2): 60 W/ch CENTER2): 60 W SURR2): 60 W/ch Models of area code CN (6 ohms 1 kHz, THD 0.7%)1) FRONT2): 40 W/ch CENTER2): 40 W SURR2): 40 W/ch (6 ohms 1 kHz, THD 10%)1) FRONT2): 60 W/ch CENTER2): 60 W SURR2): 60 W/ch (6 ohms 1 kHz, THD 0.7%)3) FRONT2): 37 W/ch CENTER2): 37 W SURR2): 37 W/ch (6 ohms 1 kHz, THD 10%)3) FRONT2): 55 W/ch CENTER2): 55 W SURR2): 55 W/ch 1) Measured under the following conditions: Area code Power requirements CEL, CEK, CN 230 V AC, 50 Hz AU 240 V AC, 50 Hz 2) Depending on the sound field settings and the source, there may be no sound output. 38GB 3) Measured under the following conditions: Area code Power requirements CN 220 V AC, 50 Hz Inputs (Analog) TV/SAT, DVD, VIDEO Sensitivity: 500 mV Impedance: 50 kiloohms Inputs (Digital) DVD (Coaxial) Sensitivity: – Impedance: 75 ohms DVD, TV/SAT (Optical) Sensitivity: – Impedance: – Outputs (Analog) SUB WOOFER Voltage: 2 V Impedance: 1 kiloohms Reproduction frequency range: 28 – 20,000 Hz Tone Gain levels ±6 dB, 1 dB step FM tuner section Tuning range 87.5 - 108.0 MHz Antenna FM wire antenna Antenna terminals 75 ohms, unbalanced Intermediate Frequency 10.7 MHz AM tuner section Tuning range Models of area code CEL, CEK, AU, CN With 9-kHz tuning scale: 531 -1,602 kHz Antenna Loop antenna Intermediate Frequency 450 kHz Video section Inputs/Outputs Video: 1 Vp-p, 75 ohms General Power requirements Area code Power requirements CEL, CEK 230 V AC, 50/60 Hz AU 240 V AC, 50 Hz CN 220 – 230 V AC, 50/60 Hz Power consumption Area code Power consumption CEL, CEK, AU, CN 170 W Power consumption (during standby mode) 0.3 W Dimensions (w/h/d) (Approx.) STR-KSL700 STR-KSL600 STR-KSL500 Mass (Approx.) 430 . 352 . 64 mm 430 . 352 . 66 mm 430 . 352 . 64 mm including projecting parts and controls 5.5 kg Speaker section Front speakers • HT-SL800/HT-SL700 (SS-SLP701) • HT-SL600/HT-SL500 (SS-MSP501) Center speaker (SS-CNP501) Surround speakers (SS-MSP501) Speaker system Full range, magnetically shielded Speaker units SS-SLP701 40 . 70 mm cone type SS-MSP501/SS-CNP501 55 . 110 mm cone type Enclosure type Bass reflex Rated Impedance 6 ohms Dimension (w/h/d) (Approx.) SS-SLP701 246 . 1053 . 246 mm SS-CNP501 280 . 82 . 106 mm SS-MSP501 76 . 162 . 106 mm Mass (Approx.) SS-SLP701 4.0 kg SS-MSP501 0.8 kg SS-CNP501 1.0 ...