valutazioni - 0, GPA: 0
(
)
)
|
Facilità d'uso
• For the best reception, place the antenna away from the TV or other sources of radiation. 18 EN Play audio from TV or other devices Press SOURCE / AUDIO SOURCE repeatedly to select the audio output of the connected device. Play from an MP3 player Connect and play audio files from an MP3 player or other external audio devices. 1 Connect the MP3 player to the home theater as described in the Quick star t guide. 2 Press SOURCE / AUDIO SOURCE repeatedly until ‘MP3 LINK’ appears on the display panel. 3 Press the buttons on the MP3 player to select and play audio files. Play from an iPod or iPhone By connecting and installing a Philips Dock for iPod/iPhone, you can use the home theater to play music, movies and photos from your iPod or iPhone. Note • You can charge your iPod/iPhone on the dock while the home theater is in iPod mode. Dock your iPod or iPhone 1 Move the slide at the bottom of the dock to ‘STANDARD’, then connect the dock to the home theater. 2 Connect the yellow composite cable from the dock to the T V. 3 Switch on the iPod or iPhone and place it in the dock. 4 On the home theater remote control, press (Home), then select [browse iPod] and press OK. Listen to music 1 Dock your iPod or iPhone (see ‘Dock your iPod or iPhone’ on page 999). 2 Press DOCK for iPod on the home theater remote control. » The playlists are displayed on the TV. 3 Press the Navigation buttons and OK to select and play tracks. Watch video or view slideshows Note • On iPod, enable the TV ON setting. • On iPhone, select the TV Out option. 1 Dock your iPod or iPhone (see ‘Dock your iPod or iPhone’ on page 999). 2 Switch the TV to the AV/ VIDEO source (corresponding to the yellow composite cable). » The TV screen goes blank. 3 Browse on the iPod or iPhone screen to select videos or photos. 4 Press (Play) to play the video and photos. » The picture is displayed on the TV. Use Philips EasyLink The home theater suppor ts Philips EasyLink, which uses the HDMI CEC (Consumer Electronics Control) protocol. EasyLinkcompliant devices that are connected through HDMI connectors can be controlled by a single remote control. Note • Philips does not guarantee 100% interoperability with all HDMI CEC devices. 1 Switch on the HDMI CEC operations on the TV and other connected devices. See the manual of the TV or other devices for details. 2 Press (Home). English EN 19 3 Select [Setup], then press OK. 4 Select [EasyLink] > [EasyLink], then press OK. 5 Select [On], then press OK. 6 You can now enjoy the following Philips EasyLink controls. One-touch play When you play a disc, the TV automatically switches to the correct channel. One-touch standby When you press and hold (Standby) on the remote control, the home theater and all the connected HDMI CEC devices (if they suppor t one-touch standby) switch to standby mode simultaneously. System Audio Control When you play a device that has its audio output routed to the home theater, the home theater switches to the corresponding audio source automatically. To use one-touch audio, enable this feature and follow the instructions on the TV to map the connected devices correctly to the audio input jacks of the home theater. Audio Input Mapping Updates audio input mapping if there are new devices connected. 5 Change settings This section helps you to change the settings of your home theater. Caution • Most of the settings are already configured with the best value for the home theater. Unless you have a specific reason to change a setting, it is best to leave it at the default value. Access the setup menu 1 Press (Home). 2 Select [Setup], then press OK. » The setup menu appears. 3 Select a setup menu, then press OK. See the following sections for information about how to change the settings of your home theater. 4 Press BACK to return to the previous menu, or press to exit. Note • You cannot change a setting that is grayed out. Change video settings 1 Press (Home). 2 Select [Setup], then press OK. 3 Select [Video], then press OK. 4 Select and adjust the following settings: • [TV Display]: Selects a picture display format to fit the T V screen. • [HDMI Video]: Selects the HDMI video resolution. • [HDMI Deep Color]: Displays colors with more shades and hues when the video content is recorded in Deep Color and the TV suppor ts this feature. 20 EN • [Component Video]: Selects the component video resolution. Copy- protected DVDs can display only 480p/576p or 480i/576i. • [Blu-ray 3D video]: Selects the 3-dimensional video output when you play a 3D video on your home theater. The home theater must be connected to a 3D TV through HDMI. • [Picture Settings]: Selects a predefined color setting. 5 Press OK to confirm your choice. Note • The best setting is automatically selected for the TV. If you change the setting, ensure that the TV suppor ts the new setting. • For settings related to HDMI, the TV must be connected through HDMI. • For settings related to progressive or component video, the TV must be connected throu...