valutazioni - 0, GPA: 0
(
)
)
|
da questo dispositivo ha anche altre istruzioni :
Facilità d'uso
Df: The distance from Front Speaker Dc: The distance from Centre Speaker Dr: The distance from Rear Speaker Setting the Centre Speaker If the distance of Dc is equal to or longer than the distance of Df in the figure, set the mode as 0ms. Otherwise, change the setting according to the table. Distance between Df and Dc 0.00m 0.34m 0.68m 1.06m 1.40m 1.76m Delay Time 00 ms 01 ms 02 ms 03 ms 04 ms 05 ms Setting the Rear Speaker If the distance of Dc is equal to or longer than the distance of Dr in the figure, set the mode as 0ms. Otherwise, change the setting according to the table. Distance between Dr and Dc 0.00m 1.06m 2.11m 3.16m 3.62m 5.29m Delay Time 00 ms 03 ms 06 ms 09 ms 12 ms 15 ms .NOTE . With PL II (Dolby Pro Logic II), the delay time may be different for each mode. . With AC-3 and DTS, the delay time can be set between 00 and 15mSEC. . The Centre channel is only adjustable on 5.1 channel discs. Settings Move Select Return Speaker Setting Speaker Size Sound Edit Delay Time Test Tone : On > Select Return Use the Test Tone feature to check the speaker connections. • Press the <> buttons to select On. • The test tone will be sent to Front Left . Center . Front Right . Rear Right . Rear Left . Subwoofer in order. To stop the test tone, press the ENTER button. ASC (Auto Sound Calibration) Setting By setting the Auto Sound Calibration(ASC) function just once when you relocate or install the product, you can have the product automatically recognize the distance between speakers, levels between channels, and frequency characteristics to create a 5.1-channel sound field optimized for your environment. AUX IN 1/ ASC IN ASC Microphone L: Front Speaker (L) SW: Subwoofer R: Front Speaker (R) SL: Rear Speaker (L) C: Centre Speaker SR: Rear Speaker (R) English 31 Setup . NOTE . NOTE . ASC setup can be made when there is no disc in the product. . You cannot adjust the volume using the volume control buttons, because the volume level is fixed during the ASC setup. . If the auto sound microphone is disconnected during the ASC setup, the setup will be cancelled. . When ASC function is activated, the DSP/EQ, Dolby Pro Logic ll and P. BASS sound effects will not work. . If the product is connected to external devices or other components (such as AUX, D.IN), the ASC Setup may not work exactly. Auto Sound Calibration You will hear either the ASC mode or the User Speaker Settings. • ON: You will hear sound in the Auto Sound Calibration(ASC) mode. • OFF: You will hear sound in the Speaker Setting value. . Setting the Auto Sound Calibration function takes about 3 minutes. DRC (Dynamic Range Compression) This feature balances the range between the loudest and quietest sounds. You can use this function to enjoy Dolby Digital sound when watching movies at low volume at night. • You can select either off, 2/8, 4/8, 6/8, Full. AV-SYNC Video and audio sync may not match with digital TV. If this occurs, adjust the audio delay time to match the video • You can set the audio delay time between 0 mSec and 300 mSec. Set it to the optimal status. HDMI AUDIO The audio signals transmitted over the HDMI Cable can be toggled On/Off. Settings Move Select Return Change Select Return Auto Sound Calibration : ON > Auto Sound Calibration Setting Auto Sound Calibration Auto Sound Calibration Setting 1. Plug the ASC microphone into the ASC input jack. 2. Place the ASC microphone at the listening position. • Auto Sound Calibration will be automatically set up in the following sequence: Front Left Center Front Right Rear Right Rear Left Subwoofer • Press the RETURN button to cancel the Auto Sound Calibration Setting. • When the message "REMOVE MIC" appears on the display, unplug the ASC microphone. • On : Both video and audio signals are transmitted over the HDMI connection cable, and audio is output through your TV speakers only. • Off : Video is transmitted over the HDMI connection cable only, and audio is output through the product speakers only. . NOTE . The default setting of this function is HDMI Audio Off. . HDMI Audio is automatically down-mixed to 2ch for TV speakers. . When HDMI Audio is set to On, PL II /DSP EQ /P.BASS doesn't work. EQ Optimizer Set optimal EQ automatically depending on the region. • Off: Turn EQ Optimizer off. • On: Turn EQ Optimizer on. 32 English 03 Setup System Security Initial Setting By using the Initial Setting, you can set language, TV aspect and ASC(Auto Sound Calibration) setting. Check if the ASC microphone is connected to the product. .NOTE . If the HDMI cable is connected to the product, TV aspect does not appear and it is set to 16:9 Wide automatically. DivX(R) Registration View DivX(R) VOD Registration Code to purchase and play DivX(R) VOD content. Language You can select the language you prefer for on- screen menu, disc menu, etc. OSD Language Disc Menu Select the language for the on- screen displays. Select the language for the disc menu displays. Audio Select the language for disc audio. Subtitle Sel...
Questo manuale è adatto anche per i modelli :Home theater - HT-C555 (3.35 mb)
Home theater - HT-C655W (3.35 mb)