valutazioni - 2, GPA: 4
(
)
)
|
da questo dispositivo ha anche altre istruzioni :
Home theater - HT-SS1200 (2.09 mb)
Home theater - HT-SS1200 (3.04 mb)
Home theater - HT-SS1200 (1.1 mb)
Facilità d'uso
CAL menu parameters You can use the A. CAL menu to make settings for the Auto Calibration function to suit your preference. Select “8-A. CAL” in the amplifier menus. For details on adjusting the parameters, see “Navigating through menus” (page 32) and “Overview of the menus” (page 33). ■ AUTO CAL (Auto Calibration on/ off) • A.CAL NO The Auto Calibration function is turned off. • A.CAL YES The Auto Calibration function start. ■ CAL LOAD (Calibration load)* • LOAD YES Select this when you want to load the saved Auto Calibration result. • LOAD NO Select this when you do not want to load the saved Auto Calibration result. • You can select this parameter only when you have performed the Auto Calibration and saved the settings. 27GB Getting Started 7: Adjusting the speaker levels and balance (TEST TONE) You can adjust the speaker levels and balance while listening to the test tone from your listening position. Tip The receiver employs a test tone with a frequency centered at 800 Hz. 1 Press AMP MENU. “1-LEVEL” appears on the display. 2 Press © or b to enter the menu. 3 Press v/v repeatedly to select “T. TONE”. 4 Press © or b to enter the parameter. 5 Press v/v repeatedly to select “T. TONE Y”. The test tone is output from each speaker in sequence as follows: Front left t Center t Front right t Surround right t Surround left t Sub woofer 6 Adjust the speaker levels and balance using the LEVEL menu so that the level of the test tone sounds the same from each speaker. For details, see “Adjusting the level (LEVEL menu)” (page 36). Tips • To adjust the level of all speakers at the same time, press MASTER VOL +/-. You can also use MASTER VOLUME on the receiver. • The adjusted value are shown on the display during adjustment. To turn off the test tone Repeat steps 1 to 5 above. Then, select “T. TONE N” in step 5. 28gb Playback Selecting a component o TV l/g CMD VIDEO 1 VIDEO 2 VIDEO 3 DVD SAT TV SA-CD/CD TUNER @ @ Q (°) 2CH a "(D -CD >10/. “CD CLEAR A.F.D. MOVIE MUSIC a CD CD AMP MENU °®a(D C ) AUTO CAL “Co0® c ) D.TUNING 0(^°(3D CD D.SKIP MEMORY DVD MENU °(O/t0 0(ENTER) ( ) FM MODE 0TOOLS °MUTING MUTING 3 ° RETURN/EXIT °MENU TV CH - TV CH + PRESET - REPLAY ADVANCE PRESET + . GÜD <> 1 Press the input button to select a component. You can also use INPUT SELECTOR on the receiver. The selected input appears on the display. Selected input [Display] Components that can be played back DMPORT DIGITAL MEDIA PORT [DMPORT] adapter connected to DMPORT jack VIDEO 1 VCR, etc., connected to [VIDEO 1] the VIDEO 1 jack VIDEO 2 Blu-ray disc player, etc., [VIDEO 2/BD]* connected to the VIDEO 2/BD jack DVD DVD player, etc., [DVD] connected to DVD jack SAT Satellite tuner, set-top [SAT] box, etc., connected to SAT jack TV TV, etc., connected to TV [TV] jack SA-CD/CD Super Audio CD/CD [SA-CD/CD] player, etc., connected to the SA-CD/CD jack TUNER [FM or AM band] Built-in radio tuner * “VIDEO 2/BD” scrolls across the display, then “VIDEO 2” appears. 2 Turn on the component and start playback. 3 Press MASTER VOL +/- to adjust the volume. You can also use MASTER VOLUME on the receiver. To mute the sound Press MUTING. The muting function will be canceled when you do the following. • Press MUTING again. • Increase the volume. • Turn off the receiver. To avoid damaging your speakers Before you turn off the receiver, be sure to turn down the volume level. TV INPUT DMPORT 1 29eB Playback Listening/Watching a component Listening to a Super Audio CD/CD O © V“°' ’°!O ,ÄrK © © IT © CD CD CD CD °rn ‘r^i *m 'rp1 7 • .1= '®"S cd1 •0; clSb- S gS) 'SS' © © ' Ö ® ® Notes • The operation is described for a Sony Super Audio CD player. • Refer to the operating instructions supplied with the Super Audio CD player or CD player. Tips •You can select the sound field to suit the music. Refer to page 44 for details. Recommended sound fields: Classical: HALL Jazz: JAZZ Live concert: CONCERT • You can listen to the sound that was recorded in the 2 channel format from all speakers (multi channel). Refer to page 42 for details. 1 Turn on the Super Audio CD player/CD player, then place the disc on the tray. 2 Turn on the receiver. 3 Press SA-CD/CD. You can also use INPUT SELECTOR on the receiver to select “SA-CD/CD”. 4 Playback the disc. 5 Adjust to a suitable volume. 6 After you have finished listening to the Super Audio CD/CD, eject the disc and turn off the receiver and Super Audio CD player/ CD player. 30e» Watching a DVD Notes • Refer to the operating instructions supplied with the TV and DVD player. • Check the following if you cannot listen to multi channel sound. - Be sure this receiver is connected to the DVD player via a digital connection. - Be sure the digital audio output of the DVD player is set up properly. Tips • Select the audio format of the disc to be played, if necessary. • You can select the sound field to suit the movie/musi...
Questo manuale è adatto anche per i modelli :Home theater - HT-SF1200 (1.07 mb)